Related references
Note: Only part of the references are listed.Promoted formation of stereocomplex in enantiomeric poly(lactic acid)s induced by cellulose nanofibers
Qian Ren et al.
CARBOHYDRATE POLYMERS (2022)
Cellulose nanofiber reinforced poly (lactic acid) with enhanced rheology, crystallization and foaming ability
Qian Ren et al.
CARBOHYDRATE POLYMERS (2022)
Fabrication of super-hydrophilic and highly open-porous poly (lactic acid) scaffolds using supercritical carbon dioxide foaming
Qian Ren et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)
Preparation and properties of thermoplastic polyurethane foams with bimodal structure based on TPU/PDMS blends
Bozhen Wu et al.
JOURNAL OF SUPERCRITICAL FLUIDS (2021)
Polyamide 6 composites reinforced with nanofibrillated cellulose formed during compounding: Effect of acetyl group degree of substitution
Takeshi Semba et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)
Fabrication of polylactic acid/halloysite nanotube scaffolds by foam injection molding for tissue engineering
Meltem Eryildiz et al.
POLYMER COMPOSITES (2020)
Crystallization kinetics and morphology of small concentrations of cellulose nanofibrils (CNFs) and cellulose nanocrystals (CNCs) melt-compounded into poly(lactic acid) (PLA) with plasticizer
Caitlyn M. Clarkson et al.
POLYMER (2020)
Controlled Arrangement of Nanocellulose in Polymeric Matrix: From Reinforcement to Functionality
Na Peng et al.
ACS NANO (2020)
Fabrication of branching poly (butylene succinate)/cellulose nanocrystal foams with exceptional thermal insulation
Dexian Yin et al.
CARBOHYDRATE POLYMERS (2020)
Effect of Cellulose Nanofiber (CNF) Surface Treatment on Cellular Structures and Mechanical Properties of Polypropylene/CNF Nanocomposite Foams via Core-Back Foam Injection Molding
Long Wang et al.
POLYMERS (2019)
Strong and thermally insulating polylactic acid/glass fiber composite foam fabricated by supercritical carbon dioxide foaming
Jiachang Wang et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)
Development of high thermal insulation and compressive strength BPP foams using mold-opening foam injection molding with in-situ fibrillated PTFE fibers
Jinchuan Zhao et al.
EUROPEAN POLYMER JOURNAL (2018)
Fabrication and mechanism of poly(butylene succinate) urethane ionomer microcellular foams with high thermal insulation and compressive feature
Yue Xu et al.
EUROPEAN POLYMER JOURNAL (2018)
Injection-molded microcellular PLA/graphite nanocomposites with dramatically enhanced mechanical and electrical properties for ultra-efficient EMI shielding applications
Guilong Wang et al.
JOURNAL OF MATERIALS CHEMISTRY C (2018)
Effect of surface modification on the dispersion, rheological behavior, crystallization kinetics, and foaming ability of polypropylene/cellulose nanofiber nanocomposites
Long Wang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Ultralow-Threshold and Lightweight Biodegradable Porous PLA/MWCNT with Segregated Conductive Networks for High-Performance Thermal Insulation and Electromagnetic Interference Shielding Applications
Guilong Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Low-density and structure-tunable microcellular PMMA foams with improved thermal-insulation and compressive mechanical properties
Guilong Wang et al.
EUROPEAN POLYMER JOURNAL (2017)
Use of stereocomplex crystallites for fully-biobased microcellular low-density poly(lactic acid) foams for green packaging
Long Wang et al.
CHEMICAL ENGINEERING JOURNAL (2017)
Advanced bimodal polystyrene/multi-walled carbon nanotube nanocomposite foams for thermal insulation
Pengjian Gong et al.
CARBON (2017)
Fundamental Influences of Induced Crystallization and Phase Separation on the Foaming Behavior of Poly(lactic acid)/Polyethylene Glycol Blends Blown with Compressed CO2
Qian Ren et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2016)
Formation mechanism and tuning for bi-modal cell structure in polystyrene foams by synergistic effect of temperature rising and depressurization with supercritical CO2
Lin-Qiong Xu et al.
JOURNAL OF SUPERCRITICAL FLUIDS (2016)
Cell nucleation in dominating formation of bimodal cell structure in polypropylene/polystyrene blend foams prepared via continuous extrusion with supercritical CO2
Kun Wang et al.
JOURNAL OF SUPERCRITICAL FLUIDS (2016)
Robust Interfacial Cylindrites of Polylactic Acid Modulated by an Intense Shear Flow Field
Yang Li et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)
Effect of cellulose nanocrystals (CNC) on rheological and mechanical properties and crystallization behavior of PLA/CNC nanocomposites
Musa R. Kamal et al.
CARBOHYDRATE POLYMERS (2015)
Multifunctional PLA-PHB/cellulose nanocrystal films: Processing, structural and thermal properties
M. P. Arrieta et al.
CARBOHYDRATE POLYMERS (2014)
Development of high void fraction polylactide composite foams using injection molding: Mechanical and thermal insulation properties
A. Ameli et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
On the use of nanocellulose as reinforcement in polymer matrix composites
Koon-Yang Lee et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Isothermal Crystallization Kinetics of Poly(lactic acid)/Synthetic Mica Nanocomposites
Diego H. S. Souza et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2014)
Cellulose nanofibre-poly(lactic acid) microcellular foams exhibiting high tensile toughness
Jana Dlouha et al.
REACTIVE & FUNCTIONAL POLYMERS (2014)
Poly (lactic acid) foaming
Mohammadreza Nofar et al.
PROGRESS IN POLYMER SCIENCE (2014)
Microcellular Foaming of Poly(lactic acid)/Silica Nanocomposites in Compressed CO2: Critical Influence of Crystallite Size on Cell Morphology and Foam Expansion
Guoying Ji et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2013)
Influence of cellulose nanofibers on the morphology and physical properties of poly(lactic acid) foaming by supercritical carbon dioxide
Se Youn Cho et al.
MACROMOLECULAR RESEARCH (2013)
Strong Shear Flow-Driven Simultaneous Formation of Classic Shish-Kebab, Hybrid Shish-Kebab, and Transcrystallinity in Poly(lactic acid)/Natural Fiber Biocomposites
Huan Xu et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2013)
Extruded polystyrene foams with bimodal cell morphology
Cailiang Zhang et al.
POLYMER (2012)
In situ preparation of cross-linked polystyrene/poly(methyl methacrylate) blend foams with a bimodal cellular structure
Dominik Kohlhoff et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2012)
Poly(lactic acid) crystallization
Sajjad Saeidlou et al.
PROGRESS IN POLYMER SCIENCE (2012)
The role of cellulose nanofibres in supercritical foaming of polylactic acid and their effect on the foam morphology
Jana Dlouha et al.
SOFT MATTER (2012)
Transcrystallization behavior at the poly(lactic acid)/sisal fibre biocomposite interface
Yaming Wang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
A two-step depressurization batch process for the formation of bi-modal cell structure polystyrene foams using scCO(2)
Jin-Biao Bao et al.
JOURNAL OF SUPERCRITICAL FLUIDS (2011)
Bi-cellular Foam Structure of Polystyrene from Extrusion Foaming Process
Kyung-Min Lee et al.
JOURNAL OF CELLULAR PLASTICS (2009)
Effects of die geometry on cell nucleation of PS foams blown with CO2
X Xu et al.
POLYMER ENGINEERING AND SCIENCE (2003)
Share Paper
