☆ 4.7 Article

Study on dust pollution law and chemical dust suppression technology of non hard pavement in urban construction sites

BUILDING AND ENVIRONMENT (2023)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

Numerical study of time dependent flow of immiscible Saffman dusty (fluid-particle suspension) and Eringen micropolar fluids in a duct with a modified cubic B-spline Differential Quadrature method

Rajesh Kumar Chandrawat et al.

Summary: The article presents a comprehensive mathematical model and computational simulation for the unsteady flow of two immiscible fluids through horizontal channels. It considers mass transfer and stable liquid-liquid interface in the flow with the addition of particles and micropolar fluids. The simulations visualize the effects of various hydrodynamic and solutal parameters on flow characteristics.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2022)

Add to Collection

Article Engineering, Geological

Synthesis and characterization of water injection fracturing fluid for wetting and softening coal seam

Gang Zhou et al.

Summary: This study aimed to achieve dust control at coal mining faces through the use of a new carboxylic anionic surfactant, providing a safe working environment for underground operators. Testing showed the product had low surface tension, high shear viscosity, and low filtration, with superior wetting and softening effects on coal compared to traditional fracturing fluids. Through molecular dynamics simulations, it was determined that the product could effectively connect with coal molecules and greatly improve coal wetting.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2022)

Add to Collection

Article Engineering, Chemical

Study on dust diffusion characteristics of continuous dust sources and spray dust control technology in fully mechanized working face

Yapeng Wang et al.

Summary: This study investigates the dust pollution law of roadway and the low surface tension spray dust removal technology of heading head in fully mechanized working face. The optimum spray parameters are determined through simulation analysis, and field application tests are conducted, showing a high reduction rate of dust.

POWDER TECHNOLOGY (2022)

Add to Collection

Article Construction & Building Technology

Investigation of dust pollution control rules in tunnel excavation based on modularized airflow diverging system

Xianhang Yang et al.

Summary: This study aims to address the serious dust pollution problems in the site environment of tunnel excavation. A computational fluid dynamics (CFD) model was established to simulate the airflow-dust coupling diffusion behavior in the tunnel, and the effectiveness of this model was validated through field measurements. The simulation results showed that optimizing the dust pollution control strategy can effectively control dust pollution and improve the tunnel environment.

BUILDING AND ENVIRONMENT (2022)

Add to Collection

Article Construction & Building Technology

Research on the control law of dust in the main ventilation system in excavated tunnels for cleaner production

Qiang Liu et al.

Summary: This study utilized computational fluid dynamics (CFD) and field measurements to verify the effectiveness of the main ventilation system in controlling dust in a tunnel. The research showed that within a certain range of airflow volume, the system could effectively control dust concentration in the working area, ultimately protecting the health of tunnel workers.

BUILDING AND ENVIRONMENT (2021)

Add to Collection

Article Construction & Building Technology

Optimization of spray dust suppression device in return air tunnel of a coal mine based on CFD technology

Shaobo Zhang et al.

Summary: The development of a wet and dry dual-purpose dust reduction device in a coal mine successfully reduced the level of harm caused to mineworkers by respirable dust. Through spraying experiments and numerical simulations, the optimal nozzles and parameters were determined to achieve an efficient dust reduction effect, with a dust reduction efficiency of 90.25% observed in field application.

BUILDING AND ENVIRONMENT (2021)

Add to Collection

Article Engineering, Chemical

Fabrication and characterization of a multi-functional and environmentally-friendly starch/organo-bentonite composite liquid dust suppressant

Yunyan Zhu et al.

Summary: The starch/organo-bentonite composite liquid dust suppressant (CLDS) effectively enhances dust-suppression effect, overcomes dust resuspension problem, saves water consumption, and brings potential economic benefits through preparation and characterization.

POWDER TECHNOLOGY (2021)

Add to Collection

Review Environmental Sciences

A review on health risk assessment of PM in the construction industry Current situation and future directions

Khusniddin Khamraev et al.

Summary: Particulate matter (PM) is a primary pollutant in the environment, with construction projects contributing significantly to its emissions. Existing health risk assessments in the construction industry are inefficient in reducing PM exposure risks. Research in ambient air quality is more developed compared to other industries, highlighting the need for advancements in construction industry risk assessments.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Add to Collection

Article Energy & Fuels

Experimental investigation on combined modification for micro physicochemical characteristics of coal by compound reagents and liquid nitrogen freeze-thaw cycle

Weibo Han et al.

Summary: An experimental study on combined physicochemical modification of coal was conducted to meet the urgent demands for efficient resources and sustainable development. The optimal physicochemical modification scheme included the use of mine water, SLS, nitric acid, and [Bmim]Cl for freeze-thaw cycles, resulting in significant improvements in coal wettability, porosity, and permeability. The synergy of combined modification and multi-field coupling led to a substantial increase in porosity and permeability, while reducing surface tension and enhancing coal mining safety and production efficiency.

FUEL (2021)

Add to Collection

Article Engineering, Environmental

Study of the microscopic mechanism of lauryl glucoside wetting coal dust: Environmental pollution prevention and control

Wenjin Niu et al.

Summary: Molecular dynamics simulation combined with experimental methods were used to study the adsorption and wetting process of APG-12 molecules on coal molecules, revealing that APG-12 has a certain wetting effect on coal dust. Analysis showed that APG-12 molecules can easily adsorb on the surface of coal molecules and adsorb water molecules around them through hydrogen bonds.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Environmental Sciences

Development and characterization of a dust suppression spray agent based on an adhesive NaAlg−gln−poly/polysaccharide polymer

Jiayi Yan et al.

Summary: By polymerizing and modifying sodium alginate, a dust suppression agent NaAlg-g-OJ with good wettability, adhesion, and high coagulability was synthesized. Experimental results showed that NaAlg-g-OJ has high thermal stability, high water retention, and good dust reduction effects.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Add to Collection

Article Environmental Sciences

RS&GIS based PM emission inventories of dust sources over a provincial scale: A case study of Henan province, central China

Huan Yang et al.

ATMOSPHERIC ENVIRONMENT (2020)

Add to Collection

Article Environmental Sciences

Spray dedusting scheme under hybrid ventilation at a fully mechanized excavation face

Haiming Yu et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2020)

Add to Collection

Article Engineering, Chemical

Synthesis and performance characterization of a novel wetting cementing agent for dust control during conveyor transport in coal mines

Gang Zhou et al.

POWDER TECHNOLOGY (2020)

Add to Collection

Article Construction & Building Technology

Dust removal effect of negatively-pressured spraying collector for advancing support in fully mechanized coal mining face: Numerical simulation and engineering application

Gang Zhou et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2020)

Add to Collection

Article Engineering, Environmental

Effectiveness and mechanism of carbamide/fly ash cenosphere with bilayer spherical shell structure as explosion suppressant of coal dust

Xiang Wang et al.

JOURNAL OF HAZARDOUS MATERIALS (2019)

Add to Collection

Article Engineering, Chemical

Study of high-pressure air curtain and combined dedusting of gas water spray in multilevel ore pass based on CFD-DEM

Yapeng Wang et al.

ADVANCED POWDER TECHNOLOGY (2019)

Add to Collection

Article Energy & Fuels

Laboratory results of a 3rd generation roof bolter canopy air curtain for respirable coal mine dust control

W. R. Reed et al.

INTERNATIONAL JOURNAL OF COAL SCIENCE & TECHNOLOGY (2019)

Add to Collection

Article Energy & Fuels

The design of a laboratory apparatus to simulate the dust generated by longwall shield advances

Michael R. Shahan et al.

INTERNATIONAL JOURNAL OF COAL SCIENCE & TECHNOLOGY (2019)

Add to Collection

Article Engineering, Chemical

Equilibrium morphology of gas-liquid Janus droplets: A numerical analysis of buoyancy effect

Shaobin Zhang et al.

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2018)

Add to Collection

Review Chemistry, Multidisciplinary

A synthesis and performance evaluation of a highly efficient ecological dust depressor based on the sodium lignosulfonate-acrylic acid graft copolymer

Yanghao Liu et al.

RSC ADVANCES (2018)

Add to Collection

Article Chemistry, Applied

The development and characterization of a novel coagulant for dust suppression in open-cast coal mines

Gang Zhou et al.

ADSORPTION SCIENCE & TECHNOLOGY (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Dust pollution control on construction sites: Awareness and self-responsibility of managers

Jian Zuo et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Add to Collection

Article Green & Sustainable Science & Technology

Mitigating construction dust pollution: state of the art and the way forward

Zezhou Wu et al.

JOURNAL OF CLEANER PRODUCTION (2016)

Add to Collection

Article Engineering, Chemical

Comparative analysis of CFD models for jetting fluidized beds: The effect of inter-phase drag force

Pei Pei et al.

POWDER TECHNOLOGY (2012)

Add to Collection

Article Engineering, Industrial

The effectiveness of DustBubbles on dust control in the process of concrete drilling

Shichao Fan et al.

SAFETY SCIENCE (2012)

Add to Collection

Review Environmental Sciences

A review on the importance of metals and metalloids in atmospheric dust and aerosol from mining operations

Janae Csavina et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2012)

Add to Collection

Article Construction & Building Technology

Impact of Fine Materials Content on the Transport of Dust Suppressants in Gravel Road Wearing Courses

Karin Edvardsson et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2011)

Add to Collection

Article Physics, Multidisciplinary

Bagnold scaling, density plateau, and kinetic theory analysis of dense granular flow

N Mitarai et al.

PHYSICAL REVIEW LETTERS (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.