Related references
Note: Only part of the references are listed.
Article
Energy & Fuels
Muzammil Khan et al.
Summary: Thermochemical conversion of biomass has been recognized as a promising technique for producing renewable fuels. Machine learning has gained significant interest in optimizing and controlling these processes. This study provides a comprehensive review of state-of-the-art machine learning applications in various thermochemical conversion processes and highlights the advantages of hybrid models over traditional models.
Article
Agricultural Engineering
Tossapon Katongtung et al.
Summary: Machine learning techniques were used to predict biocrude yields and higher heating values from hydrothermal liquefaction of wet biomass and wastes. An extreme gradient boosting model showed the best prediction accuracy with temperature being the most influential feature. Feedstock characteristics contributed more than 55% to the model, and individual effects and interactions of the most important features were also examined for better understanding of the system.
BIORESOURCE TECHNOLOGY
(2022)
Article
Agricultural Engineering
Ianny Andrade Cruz et al.
Summary: This review critically examines the application of machine learning in the anaerobic digestion process, focusing on evaluating important algorithms and their applications in AD modeling, and outlining the challenges faced by ML in this context.
BIORESOURCE TECHNOLOGY
(2022)
Article
Engineering, Environmental
Xinzhe Zhu et al.
Summary: Data mining and machine learning have been applied to study the effects of microscopic material properties of Fe-BC on Cr(VI) removal in water, revealing that direct impacts of impregnated iron on Cr(VI) removal may be limited, while altering biochar properties indirectly affects the removal process. The study's machine learning models consider surface functionalities of BC and Fe-BC to offer more accurate predictions for Cr(VI) removal, providing important insights for the design of engineered biochar for environmental remediation.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Energy & Fuels
Hao Wei et al.
Summary: The study developed machine learning models using the random forest algorithm to accurately predict and applied co-thermochemical conversion, with extremely trees model showing better performance in prediction and generalization. The results suggest that the known of biomass pyrolysis is better than known of coal pyrolysis, and recommendations for input feature groups and variable importance measurements are provided.
Article
Engineering, Environmental
Xinzhe Zhu et al.
Summary: This study utilized machine learning to build adsorption prediction models for biochar's capability in removing recalcitrant organic contaminants (PPCPs), demonstrating that detailed biochar properties obtained from advanced techniques contribute to more accurate predictions. Surface carbon functionalities and pore diameter of adsorbents play crucial roles in predicting the adsorption capacity of PPCPs.
JOURNAL OF HAZARDOUS MATERIALS
(2022)
Review
Agricultural Engineering
Samy Berthold Engamba Esso et al.
Summary: This paper reviews the synergistic effect during the co-pyrolysis of plastic waste and biomass and considers various factors that influence this effect. The study reveals that the transfer of active hydrogen radicals, catalytic activity of alkaline metal species in biomass, and heat and mass transfer during the co-conversion are the main mechanisms of the synergistic effect.
BIOMASS & BIOENERGY
(2022)
Article
Agricultural Engineering
Federica Nardella et al.
Summary: This paper presents a study on the pyrolytic behavior of mixtures of lignocellulosic biomass with hydrocarbon plastics. The results indicate that synergistic effects during co-pyrolysis have significant impact on the composition and elemental composition of the pyrolysis oils. The changes in H/C and O/C values of the pyrolysis oils suggest that the addition of plastic can improve the quality of the pyrolysis oil.
BIORESOURCE TECHNOLOGY
(2022)
Article
Astronomy & Astrophysics
Natali S. M. de Santi et al.
Summary: This study utilizes machine-learning techniques to analyze the connection between galaxy properties and their hosting haloes, predicting baryonic properties from halo properties. The results show consistent predictions among different algorithms and the ability to accurately reproduce the power spectra of various galaxy populations. The use of data augmentation methods also improves the accuracy of predictions.
MONTHLY NOTICES OF THE ROYAL ASTRONOMICAL SOCIETY
(2022)
Article
Agricultural Engineering
Dadi V. Suriapparao et al.
Summary: Catalytic and non-catalytic microwave-assisted co-pyrolysis of biomass with plastics was conducted to investigate their interactions. The results showed that co-pyrolysis increased gas yields but reduced oil yields. The oil fraction derived from plastic pyrolysis contained more hydrocarbons, while biomass pyrolysis resulted in the formation of oxygenated compounds in the oil. A new parameter, the pyrolysis index, was introduced to measure pyrolysis intensity, and it was found to be higher for plastic pyrolysis than biomass pyrolysis, further increased by co-pyrolysis due to synergistic interactions.
BIORESOURCE TECHNOLOGY
(2022)
Article
Computer Science, Artificial Intelligence
Warakhom Wongchai et al.
Summary: Biomass is a renewable energy resource that can be substituted for fossil fuels, reducing greenhouse gas emissions. By using a machine learning algorithm, we are able to accurately estimate the aboveground biomass of fast-growing trees, providing an estimation method for tropical regions.
EXPERT SYSTEMS WITH APPLICATIONS
(2022)
Article
Agricultural Engineering
Yize Li et al.
Summary: Biochar production through pyrolysis of organic waste has the potential to reduce dependence on conventional energy sources and mitigate global warming. In this study, data-driven machine learning models were developed to predict biochar yield and compositions, resulting in higher accuracy compared to existing algorithms.
BIORESOURCE TECHNOLOGY
(2022)
Article
Agricultural Engineering
Xiefei Zhu et al.
Summary: Converting agro-residues into biochar is an important strategy for reducing environmental burdens in agricultural production. Studies have shown that biochar technology has promising carbon sequestration potential and can be used as an alternative energy source, soil amendment, and activated carbon substitute.
BIORESOURCE TECHNOLOGY
(2022)
Article
Agricultural Engineering
Dadi Suriapparao et al.
Summary: Catalytic co-pyrolysis of waste tea powder and polystyrene wastes using KOH catalyst resulted in high oil and char yields. The feed mixture ratio influenced the pyrolysis yield and product quality, while the synergy of catalyst and co-pyrolysis promoted the formation of high-quality products.
BIORESOURCE TECHNOLOGY
(2022)
Article
Agricultural Engineering
Na Huang et al.
Summary: This study proposes a novel strategy for predicting organic pollution indicators in sediments and converting contaminated sediments into resources using a catalyst. Additionally, a predictive model for organic pollution indicators is established through machine learning, providing a new approach for assessing organic pollution in sediments.
BIORESOURCE TECHNOLOGY
(2022)
Article
Energy & Fuels
Aessa Alabdrabalnabi et al.
Summary: In this study, machine learning models were used to predict the yields from the co-pyrolysis of biomass and plastics. Insights were gained into the influence of various parameters on the yields, and further improvements are now possible.
Article
Agricultural Engineering
Qinghui Tang et al.
Summary: This study aimed to predict pyrolytic gas yield and compositions based on pyrolysis conditions and biomass characteristics using machine learning algorithms and feature reduction. The results showed that six features were sufficient for accurate yield prediction, while compositions only required three. The study revealed the higher relative contribution of pyrolysis conditions to yield, CO2, and H2 compared to biomass characteristics.
BIORESOURCE TECHNOLOGY
(2021)
Article
Agricultural Engineering
Ruetai Saengsuriwong et al.
Summary: The study found that increasing temperature and mixture ratio significantly increases the yield of biocrudes in hydrothermal liquefaction, with the best results achieved at 340 degrees C and a 1:7 mixture ratio. The high heating values of the biocrude and solid residue were significantly better than those of the raw material, and the main components of the biocrudes were identified as fatty acids, amides, N-containing compounds, and cyclic ketones using advanced GCxGC/TOF-MS technology.
BIORESOURCE TECHNOLOGY
(2021)
Article
Computer Science, Artificial Intelligence
Radmila Jankovic et al.
Summary: This paper develops and compares four hybrid machine learning models for predicting the total ecological footprint of consumption, with KNNReg showing the best performance. The study also utilized a synthetic test set (SMOGN) to further evaluate the best performing model.
NEURAL COMPUTING & APPLICATIONS
(2021)
Article
Engineering, Environmental
Zejun Luo et al.
Summary: A novel strategy is proposed to convert masks and heavy fraction of bio-oil into biochar, bio-oil, and three-dimensional graphene films, which can address the environmental issues caused by plastic waste while producing high added-value chemicals.
JOURNAL OF HAZARDOUS MATERIALS
(2021)
Article
Agricultural Engineering
Sanphawat Phromphithak et al.
Summary: In this study, machine learning algorithms were used to predict CRM properties in terms of CEF and SR, with the random forest algorithm showing the highest prediction accuracy with R-2 values of 0.94 for CEF and 0.84 for SR. Biomass characteristics and ILS treatment operating conditions were found to be highly influential in making predictions. One-and two-way partial dependence plots were used to explain the multi-dimensional relationships of the most important features. Our findings could be applied in designing new ILSs and optimizing the process conditions.
BIORESOURCE TECHNOLOGY
(2021)
Article
Agricultural Engineering
Zahid Ullah et al.
Summary: A novel genetic algorithm-based feature selection approach was used in this study to predict bio-oil yield using four different machine learning methods. The findings suggested that Random Forest model performed the best and was able to reliably predict bio-oil yield. The research provided new insights into the pyrolysis process of biomass and offered a new approach to improve bio-oil yield.
BIORESOURCE TECHNOLOGY
(2021)
Article
Green & Sustainable Science & Technology
Thossaporn Onsree et al.
Summary: A machine learning model was developed to predict yields of solid products from biomass torrefaction, with the gradient tree boosting algorithm achieving the highest prediction accuracy. Key features for predicting solid yields included torrefaction temperature, residence time, O-2 concentration, volatile matter, carbon content, and oxygen content.
Review
Chemistry, Multidisciplinary
A. W. Gin et al.
Summary: The article critically reviews the literature on catalytic co-pyrolysis of plastic waste and lignocellulosic biomass, focusing on the impact of technical parameters and discussing the kinetics and reaction pathways of this process. The analysis and information presented may be beneficial for future studies in developing sustainable and efficient heating processes for re-engineering plastic and biomass wastes.
ARABIAN JOURNAL OF CHEMISTRY
(2021)
Article
Agricultural Engineering
Chung Loong Yiin et al.
Summary: Biomass wastes have great potential for renewable energy and value-added product synthesis. The key lies in developing pretreatment techniques to overcome barriers in lignocellulosic materials and find cheap, effective, environmentally friendly methods. The use of green solvents and the role of choline chloride (ChCl) in them are areas of interest and ongoing research.
BIORESOURCE TECHNOLOGY
(2021)
Article
Engineering, Environmental
Jia Wang et al.
Summary: Producing biomass-derived aromatic hydrocarbons through controllable Diels-Alder reactions is a promising method to recover energy and chemicals from waste streams. The use of Fe/HZSM-5 tandem catalysis shows increased efficiency in BTX production compared to single catalysis methods, with a synergistic effect from the coordination of Lewis and Bronsted acid sites.
JOURNAL OF HAZARDOUS MATERIALS
(2021)
Article
Engineering, Environmental
Yuzhuo Wang et al.
Summary: Co-pyrolysis of biomass and waste plastics is a long-term strategy for efficient waste management and valuable fuel generation. Studies show that polyethylene promotes the formation of long-chain alcohols while suppressing the generation of aldehydes and ketones, improving the quality of co-pyrolysis products.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION
(2021)
Review
Multidisciplinary Sciences
Fang Wang et al.
Summary: Global development heavily relies on the overexploitation of natural resources, leading to increased greenhouse gas concentrations and global climate change. Achieving carbon neutrality by 2050 is crucial, requiring reform of production systems to reduce emissions and promote carbon capture. Innovative technologies in renewable energy, food systems, waste valorization, and carbon-negative manufacturing offer solutions to mitigate climate change and support sustainable development.
Article
Agricultural Engineering
Rongjie Chen et al.
BIORESOURCE TECHNOLOGY
(2020)
Review
Agricultural Engineering
Mohamed H. M. Ahmed et al.
BIORESOURCE TECHNOLOGY
(2020)
Review
Green & Sustainable Science & Technology
Zuzanna Kaczor et al.
Editorial Material
Agricultural Engineering
Samir Kumar Khanal et al.
BIORESOURCE TECHNOLOGY
(2020)
Article
Chemistry, Multidisciplinary
Nattawut Khuenkaeo et al.
Article
Computer Science, Artificial Intelligence
Scott M. Lundberg et al.
NATURE MACHINE INTELLIGENCE
(2020)
Article
Agricultural Engineering
Thossaporn Onsree et al.
BIORESOURCE TECHNOLOGY
(2019)
Article
Engineering, Environmental
O. Sanahuja-Parejo et al.
CHEMICAL ENGINEERING JOURNAL
(2019)
Article
Agricultural Engineering
Yijing Tang et al.
BIORESOURCE TECHNOLOGY
(2018)
Article
Energy & Fuels
Nanta Sophonrat et al.
Article
Agricultural Engineering
Vivek Patil et al.
BIORESOURCE TECHNOLOGY
(2018)
Review
Agricultural Engineering
H. Hassan et al.
BIORESOURCE TECHNOLOGY
(2016)
Article
Chemistry, Analytical
Shogo Kumagai et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS
(2016)
Article
Thermodynamics
Steffen Brand et al.
Review
Thermodynamics
Faisal Abnisa et al.
ENERGY CONVERSION AND MANAGEMENT
(2014)
