Journal
ARTIFICIAL ORGANS
Volume 47, Issue 5, Pages 817-827Publisher
WILEY
DOI: 10.1111/aor.14481
Keywords
afterload; cardiovascular system; intrinsic parameters; physiological control; preload; total artificial heart
Categories
Ask authors/readers for more resources
In this study, detection techniques for the preload and afterload in total artificial hearts (TAH) are developed and their reliability is evaluated across a range of cardiovascular system states. The results show that the preload estimation is reliable, especially for the left circulation, but further improvements are needed for afterload detection.
Background: In the total artificial heart (TAH), the inputs to the physiological control unit, preload, and afterload, are detected from intrinsic pump parameters (e.g., motor current). Within this study, their detection techniques are developed, and their reliability in pre- and afterload prediction is mapped for a broad range of cardiovascular system states.Methods: We used ReinHeart TAH which is a fully implantable TAH with a plunger coil drive that is alternately emptying the left and right chambers. From the coil currents we first derived a force generated by the piston with respect to its position and then analyzed its pattern to detect (1) preload-chamber filling, found as piston position at begin ejection and (2) afterload-mean outflow pressures, determined as linearly calibrated average piston force during ejection. TAH is then integrated into a mock loop circulation (MLC) which is set to 135 different steady operating points varying in chamber filling (0%-100%, five steps), mean outflow pressures (system circulation: 60-90-120 mm Hg, pulmonary circulation: 15-30-45 mm Hg), and heart cycle duration (171-600 ms in seven non-equidistant steps). The detected preload and afterload are compared to MLC set values, and the errors are mapped.Results: Respectively for the left and right chambers, the preload was detectable in 134 and 118 operating points and the mean error was & PLUSMN;3% and & PLUSMN;2%. The afterload was detectable in 135 and 87 operating points and the mean error was 37% and 30% respectively for left and right circulation. The operational points that are further away from homeostatic equilibrium values generally yielded larger errors. The largest errors were observed for right circulation at long cycle duration, low afterload, and low filling.Conclusions: The study yields reliable preload estimation in a broad range of physiological states, particularly for left circulation. Detection of afterload needs further improvements. The study revealed a need for piston movement optimization within the ReinHeart TAH during the early phase of systole.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available