☆ 4.7 Article

Effects of stirrup spacing on shear performance of hybrid composite beams produced by pultruded GFRP profile infilled with reinforced concrete

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2022)

Related references

Note: Only part of the references are listed.

Article Polymer Science

The Effects of Eccentric Web Openings on the Compressive Performance of Pultruded GFRP Boxes Wrapped with GFRP and CFRP Sheets

Emrah Madenci et al.

Summary: This study investigates the effect of web opening position, number, and reinforcement type on the load-carrying capacity and stability of pultruded fiber-reinforced polymer profiles. The results show that the height-centered openings in the middle of the web have the least effect, while off-center and eccentric openings significantly reduce the load-carrying capacity. Additionally, carbon-FRP reinforcement contributes more to the load-carrying capacity than glass-FRP.

POLYMERS (2022)

Add to Collection

Article Polymer Science

Compressive Behavior of Pultruded GFRP Boxes with Concentric Openings Strengthened by Different Composite Wrappings

Ceyhun Aksoylu et al.

Summary: This paper experimentally investigates the effect of web openings on the response of PFRP composite profiles under compressive loads. The results show that the diameter of the hole and the type of CFRP- or GFRP-strengthening method applied are important parameters. PFRP profiles with openings are able to compensate for the reduction in load-carrying capacity, but the capacity significantly drops after a certain ratio. Moreover, profiles with CFRP wrapping are more likely to improve the load-carrying capacity compared to other wrappings.

POLYMERS (2022)

Add to Collection

Article Polymer Science

Effect of Fiber Wrapping on Bending Behavior of Reinforced Concrete Filled Pultruded GFRP Composite Hybrid Beams

Lokman Gemi et al.

Summary: This paper presents experimental studies on the effect of FRP composite wrapping on the flexure performance of RC filled pultruded GFRP profile hybrid beams with damage analysis. The results show that the use of GFRP and CFRP composites for wrapping can significantly improve the structural performance of the beams, including maximum load-carrying capacity, initial stiffness, and ductility.

POLYMERS (2022)

Add to Collection

Article Mechanics

Effects of high pulling speeds on mechanical properties and morphology of pultruded GFRP composite flat laminates

Alexander Vedernikov et al.

Summary: By analyzing the relationship between pulling speed, morphology, and mechanical properties of pultruded glass fiber/vinyl ester resin composites, this study demonstrates the possibility of high-speed pultrusion for large cross-section profiles suitable for structural application. The results show that higher pulling speeds lead to the presence of bubbles, voids, and cracks, but significantly increase the output without compromising mechanical performance.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Engineering, Manufacturing

Shape memory behavior of unidirectional pultruded laminate

Roman Korotkov et al.

Summary: This study investigates the shape memory behavior of epoxy-based pultruded flat laminates reinforced with unidirectional glass fibers, showing the shape fixity and shape recovery ratios for different fiber orientations. The study also analyzed the performance of pultruded composite materials and laid the foundation for further studies on the simulation and optimization of pultrusion processes.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Add to Collection

Article Engineering, Civil

Experimental, analytical and numerical investigation of pultruded GFRP composite beams infilled with hybrid FRP reinforced concrete

Lokman Gemi et al.

Summary: This paper presents experimental, analytical, and numerical analyses on the behavior of pultruded GFRP composite beams infilled with hybrid fiber reinforced concrete under four-point loading. The study found that the pultruded profile and composite wrapping significantly improved the performance of the beams, with hybrid reinforcements being recommended for all cases. Detailed damage analyses were also provided.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Materials Science, Composites

Effects of additives on the cure kinetics of vinyl ester pultrusion resins

Alexander Vedernikov et al.

Summary: This study focuses on investigating the cure kinetics modeling of a vinyl ester pultrusion resin. By comparing 16 kinetic models, a model based on the n th-order autocatalytic reaction was found to have the best performance, with a proposed method to reduce errors resulting from simultaneous melting of additives. The research also demonstrates the significant influence of resin composition on the manufacturing process of composite materials.

JOURNAL OF COMPOSITE MATERIALS (2021)

Add to Collection

Article Polymer Science

Modeling Spring-In of L-Shaped Structural Profiles Pultruded at Different Pulling Speeds

Alexander Vedernikov et al.

Summary: This study successfully predicted spring-in phenomena in pultruded composite profiles through a numerical model, finding that increasing pulling speeds lead to higher levels of spring-in. The validated model demonstrated the possibility of maintaining the same level of spring-in at increased pulling speeds by using a post-die cooling tool or reducing the chemical shrinkage of the resin.

POLYMERS (2021)

Add to Collection

Article Mechanics

Experimental and Theoretical Investigation on Flexure Performance of Pultruded GFRP Composite Beams with Damage Analyses

Emrah Madenci et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Review Materials Science, Composites

Pultruded materials and structures: A review

Alexander Vedernikov et al.

JOURNAL OF COMPOSITE MATERIALS (2020)

Add to Collection

Article Mechanics

Buckling and free vibration analyses of pultruded GFRP laminated composites: Experimental, numerical and analytical investigations

Emrah Madenci et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Engineering, Civil

Damages on prefabricated concrete dapped-end purlins due to snow loads and a novel reinforcement detail

Ceyhun Aksoylu et al.

ENGINEERING STRUCTURES (2020)

Add to Collection

Article Engineering, Civil

Experimental and theoretical studies on the shear performance of innovative box-shape FRP profile-concrete hybrid beams

Pu Zhang et al.

STRUCTURES (2020)

Add to Collection

Article Engineering, Multidisciplinary

The static and dynamic analyses of warping included composite exact conical helix by mixed FEM

Umit N. Aribas et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Materials Science, Composites

Behaviour of geopolymer concrete-filled pultruded GFRP short columns

Weena Lokuge et al.

JOURNAL OF COMPOSITE MATERIALS (2019)

Add to Collection

Article Mechanics

Experimental investigation of shear capacity and damage analysis of thinned end prefabricated concrete purlins strengthened by CFRP composite

Lokman Gemi et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Mechanics

FRP stay-in-place form and shear key connection for FRP-concrete hybrid beams/decks

Xingxing Zou et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Mechanics

Experimental and numerical investigation on dynamic properties of thin-walled GFRP buckled columns

G. Boscato et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Mechanics

Experimental tests and analytical model of concrete-GFRP hybrid beams under flexure

Alaa Koaik et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Mechanics

Experimental and numerical investigation on in-plane compression and shear performance of a pultruded GFRP composite bridge deck

Haohui Xin et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Construction & Building Technology

Compressive behavior of concrete confined by CFRP and transverse spiral reinforcement. Part A: experimental study

Peng Yin et al.

MATERIALS AND STRUCTURES (2016)

Add to Collection

Article Mechanics

Structural behaviour of hybrid FRP pultruded columns. Part 1: Experimental study

Francisco Nunes et al.

COMPOSITE STRUCTURES (2016)

Add to Collection

Article Materials Science, Composites

Behaviour of hollow pultruded GFRP square beams with different shear span-to-depth ratios

Majid Muttashar et al.

JOURNAL OF COMPOSITE MATERIALS (2016)

Add to Collection

Article Engineering, Civil

Identification of the Short-Term Full-Section Moduli of Pultruded FRP Profiles Using Bending Tests

Fabio Minghini et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2014)

Add to Collection

Article Materials Science, Composites

Free vibration analysis of angle-ply laminate composite beams by mixed finite element formulation using the Gateaux differential

Atilla Ozutok et al.

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS (2014)

Add to Collection

Article Engineering, Civil

FREE VIBRATION ANALYSIS OF CROSS-PLY LAMINATED COMPOSITE BEAMS BY MIXED FINITE ELEMENT FORMULATION

Atilla Ozutok et al.

INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS (2013)

Add to Collection

Article Engineering, Civil

Numerical analysis of pultruded GFRP box girders supporting adhesively-bonded concrete deck in flexure

Yail J. Kim et al.

ENGINEERING STRUCTURES (2011)

Add to Collection

Article Construction & Building Technology

Combined loading of a bridge deck reinforced with a structural FRP stay-in-place form

Joseph P. Hanus et al.

CONSTRUCTION AND BUILDING MATERIALS (2009)

Add to Collection

Article Engineering, Civil

Short term testing of hybrid T beam made of new prepreg material

J Hulatt et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2003)

Add to Collection

Article Construction & Building Technology

The use of advanced polymer composites to form an economic structural unit

J Hulatt et al.

CONSTRUCTION AND BUILDING MATERIALS (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.