4.7 Article

Heat and mass transfer characteristics during spray drying of Na2Fe0.6Mn0.4PO4F/C cathode material for Na-ion batteries

Journal

APPLIED THERMAL ENGINEERING
Volume 221, Issue -, Pages -

Publisher

PERGAMON-ELSEVIER SCIENCE LTD
DOI: 10.1016/j.applthermaleng.2022.119838

Keywords

Spray drying; Sodium-ion; Battery; Cathode materials; Heat and mass transfer; Intermittent drying

Ask authors/readers for more resources

The paper presents a detailed experimental investigation on heat and mass transfer characteristics during the synthesis of Na2Fe0.6Mn0.4PO4F/C using intermittent spray drying. The study explores the effect of intermittency on the spray drying process heat and mass transfer characteristics. It is found that increasing the nozzle orifice diameter and pumping pressure improves heat transfer, while increasing the spray time diminishes heat transfer. The volumetric heat transfer coefficient ranges between 1.5 and 3.5 kW/m3K, and the volumetric mass transfer coefficient ranges between 2.5 and 5.0 s-1 under the considered operating conditions. Correlations for heat and mass transfer coefficients are developed based on the study.
The paper presents a detailed experimental investigation on heat and mass transfer characteristics during the synthesis of Na2Fe0.6Mn0.4PO4F/C using intermittent spray drying. The drying process is carried out in a custom-made spray dryer. The novelty of the work is the study of the effect of intermittency on the spray drying process heat and mass transfer characteristics using a volumetric approach. The nozzle orifice diameter, spray duration, and spray pressure are operating parameters of the process that are varied between 0.2 and 0.4 mm at 10 and 40 s and 4 and 7 bar. An increase in nozzle orifice diameter and pumping pressure improves the heat transfer significantly; however, an increase in spray time diminishes the heat transfer. Under considered operating conditions, the volumetric heat transfer coefficient varied between 1.5 and 3.5 kW/m3K. The volumetric mass transfer coefficient ranges between 2.5 and 5.0 s-1. Based on the study, correlations for heat and mass transfer coefficients have been developed that relate the thermophysical properties of both the carrier gas and the pre-cursor fluid in terms of Ohnesorge number and Reynolds number.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available