Related references
Note: Only part of the references are listed.Long life elastocaloric regenerator operating under compression
Lucia Ianniciello et al.
APPLIED THERMAL ENGINEERING (2022)
Enhancing cooling performance of NiTi elastocaloric tube refrigerant via internal grooving
Jiongjiong Zhang et al.
APPLIED THERMAL ENGINEERING (2022)
High-performance cooling and heat pumping based on fatigue-resistant elastocaloric effect in compression
Ziga Ahcin et al.
JOULE (2022)
Thermo-hydraulic evaluation of oscillating-flow shell-and-tube-like regenerators for (elasto)caloric cooling
Ziga Ahcin et al.
APPLIED THERMAL ENGINEERING (2021)
High-entropy polymer produces a giant electrocaloric effect at low fields
Xiaoshi Qian et al.
NATURE (2021)
Long-term stable compressive elastocaloric cooling system with latent heat transfer
Nora Bachmann et al.
COMMUNICATIONS PHYSICS (2021)
Recent developments on the cyclic stability in elastocaloric materials
Muhammad Imran et al.
MATERIALS & DESIGN (2020)
Caloric materials for cooling and heating
X. Moya et al.
SCIENCE (2020)
Colossal barocaloric effects in plastic crystals
Bing Li et al.
NATURE (2019)
Ti3Sn-NiTi Syntactic Foams with Extremely High Specific Strength and Damping Capacity Fabricated by Pressure Melt Infiltration
Changchun Xie et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Overcoming fatigue through compression for advanced elastocaloric cooling
Huilong Hou et al.
MRS BULLETIN (2018)
Elastocaloric effects in the extreme
H. Sehitoglu et al.
SCRIPTA MATERIALIA (2018)
Elastocaloric Cooling on the Miniature Scale: A Review on Materials and Device Engineering
Florian Bruederlin et al.
ENERGY TECHNOLOGY (2018)
Caloric Effects in Ferroic Materials: New Concepts for Cooling
Sebastian Faehler
ENERGY TECHNOLOGY (2018)
Numerical modeling of an active elastocaloric regenerator refrigerator with phase transformation kinetics and the matching principle for materials selection
Suxin Qian et al.
ENERGY (2017)
Experiment on the convective heat transfer from airflow to skeleton in open-cell porous foams
Xin-lin Xia et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Influence of Morphology on Flow Law Characteristics in Open-Cell Foams: An Overview of Usual Approaches and Correlations
Prashant Kumar et al.
JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2017)
A regenerative elastocaloric device: experimental results
Kurt Engelbrecht et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2017)
Fatigue behaviour of NiTi shape memory alloy scaffolds produced by SLM, a unit cell design comparison
M. Speirs et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Elastocaloric cooling capacity of shape memory alloys - Role of deformation temperatures, mechanical cycling, stress hysteresis and inhomogeneity of transformation
Y. Wu et al.
ACTA MATERIALIA (2017)
A review of elastocaloric cooling: Materials, cycles and, system integrations
Suxin Qian et al.
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2016)
Effect of random structure on permeability and heat transfer characteristics for flow in 2D porous medium based on MRT lattice Boltzmann method
PeiPei Yang et al.
PHYSICS LETTERS A (2016)
A regenerative elastocaloric heat pump
Jaka Tusek et al.
NATURE ENERGY (2016)
Scientific test setup for investigation of shape memory alloy based elastocaloric cooling processes
Marvin Schmidt et al.
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2015)
Thermodynamics cycle analysis and numerical modeling of thermoelastic cooling systems
Suxin Qian et al.
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2015)
Micro-structural Impact of Different Strut Shapes and Porosity on Hydraulic Properties of Kelvin-Like Metal Foams
Prashant Kumar et al.
TRANSPORT IN POROUS MEDIA (2014)
Heat transfer coefficients for solid ceramic sponges - Experimental results and correlation
B. Dietrich
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)
Superelasticity and compression behavior of porous TiNi alloys produced using Mg spacers
Tarik Aydogmus et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2012)
Pore control in SMA NiTi scaffolds via space holder usage
A. Ghasemi et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2012)
Determining the specific surface area of ceramic foams: The tetrakaidecahedra model revisited
Amer Inayat et al.
CHEMICAL ENGINEERING SCIENCE (2011)
Numerical simulation of convective heat transfer between air flow and ceramic foams to optimise volumetric solar air receiver performances
Zhiyong Wu et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2011)
Experimental and numerical studies of the pressure drop in ceramic foams for volumetric solar receiver applications
Zhiyong Wu et al.
APPLIED ENERGY (2010)
A modification of a Nusselt number correlation for forced convection in porous media
J. Pallares et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2010)
Pressure drop measurements of ceramic sponges-Determining the hydraulic diameter
Benjamin Dietrich et al.
CHEMICAL ENGINEERING SCIENCE (2009)
A study on interstitial heat transfer in consolidated and unconsolidated porous media
Akira Nakayama et al.
HEAT AND MASS TRANSFER (2009)
Morphological Characterization of Ceramic Sponges for Applications in Chemical Engineering
Julia Grosse et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2009)
Mechanical and Microstructural Characterization of Porous NiTi Shape Memory Alloys
O. Scalzo et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Numerical investigation on the flow characteristics and permeability of three-dimensional reticulated foam materials
Weigang Xu et al.
CHEMICAL ENGINEERING JOURNAL (2008)
Mass transfer and pressure drop in ceramic foams: A description for different pore sizes and porosities
G. Incera Garrido et al.
CHEMICAL ENGINEERING SCIENCE (2008)
Numerical study of heat transfer over banks of rods in small Reynolds number cross-flow
Gabriel Gamrat et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2008)
Gradient porosity and large pore size NiTi shape memory alloys
Y. P. Zhang et al.
SCRIPTA MATERIALIA (2007)
Pressure drop measurements and modeling on SiC foams
Maxime Lacroix et al.
CHEMICAL ENGINEERING SCIENCE (2007)
Correlations for the pressure drop for flow through metal foam
N. Dukhan
EXPERIMENTS IN FLUIDS (2006)
A homogenized free energy model for hysteresis in thin-film shape memory alloys
JE Massad et al.
THIN SOLID FILMS (2005)
Heat transfer correlations for open-cellular porous materials
K Kamiuto et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2005)
Permeability of ceramic foams to compressible and incompressible flow
EA Moreira et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2004)
Simulations of flow through open cell metal foams using an idealized periodic cell structure
K Boomsma et al.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2003)
Low-density open-cell foams in the NiTi system
DS Grummon et al.
APPLIED PHYSICS LETTERS (2003)
A numerical study of interfacial convective heat transfer coefficient in two-energy equation model for convection in porous media
F Kuwahara et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2001)
Share Paper
