4.7 Article

Secondary flow through lateral passages to improve hydrothermal performance of liquid-cooled microchannel heat sinks

Related references

Note: Only part of the references are listed.
Article Thermodynamics

High aspect ratio microchannel heat sink optimization under thermally developing flow conditions based on minimum power consumption

Murat Parlak et al.

Summary: In this study, optimization efforts were made to achieve an optimum heat sink design by considering both thermal performance and power consumption, while minimizing cooling volume. The study focused on analyzing the thermally developing flows of Ethylene Glycol Water (EGW) in high aspect ratio rectangular channels to meet the heat removal requirements in electronics cooling.

APPLIED THERMAL ENGINEERING (2022)

Article Thermodynamics

Improving the hydrothermal characteristics of wavy microchannel heat sink by modification of wavelength and wave amplitude

Shayan Pourhammati et al.

Summary: The study aimed to analyze fluid flow patterns and heat exchange in a wavy microchannel heat sink by altering wave amplitude and wavelength. Results showed that small changes in wavelength and wave amplitude had better thermal-hydraulic characteristics. Furthermore, adjusting both wavelength and increasing channel height simultaneously improved overall thermal performance by providing a maximum overall performance and minimum total resistance.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2022)

Article Thermodynamics

Experimental and numerical examinations of thermofluids characteristics of double-layer microchannel heat sinks with deflectors

Han Shen et al.

Summary: This study demonstrates the effectiveness of using deflectors to enhance the thermal characteristics of double-layer microchannel heat sinks through numerical simulations and experimental verifications. The results show that using deflectors can significantly reduce the substrate temperature and improve heat transfer efficiency.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Article Thermodynamics

Heat transfer optimization based on finned microchannel heat sink

Furen Zhang et al.

Summary: This study optimized the heat dissipation effect of microchannel heat sink by introducing fins, with a relative error within 2%. The maximum and average temperatures were reduced by 6.67% and 6.75% respectively, with temperature uniformity increasing by 8.47%, pressure drop decreasing by 13.33%, and performance evaluation reaching 1.285.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)

Article Thermodynamics

Multi-objective optimization and performance assessment of microchannel heat sinks with micro pin-fins

Muhammed Emin Polat et al.

Summary: This study numerically investigated laminar, steady-state microchannel flow and conjugate heat transfer in a microchannel heat sink with micro pin-fins. Through optimizing the arrangement of micro pin-fins, the study obtained optimized heat performance, with diamond-shaped pin-fins significantly enhancing heat transfer at an increased pressure drop ratio.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)

Article Multidisciplinary Sciences

Investigation of wavy microchannel ability on electronic devices cooling with the case study of choosing the most efficient microchannel pattern

Nima Ghorbani et al.

Summary: A numerical study was conducted to investigate the ability of wavy microchannels in dampening temperature fluctuations in electronic devices. The results showed that wavy patterns with larger amplitude to wavelength ratios have enhanced heat transfer and can be used to improve the thermal-hydraulic performance of heat sinks.

SCIENTIFIC REPORTS (2022)

Article Engineering, Electrical & Electronic

Impact of Embedded Liquid Cooling on the Electrical Characteristics of GaN-on-Si Power Transistors

Luca Nela et al.

Summary: Research has shown that embedded liquid cooling has a positive impact on thermal management of wide-band-gap semiconductors, without negatively affecting the electrical performance of the devices. Liquid-cooled devices demonstrate higher current capability and improved performance compared to forced-convection air-cooling in a larger output current range.

IEEE ELECTRON DEVICE LETTERS (2021)

Article Energy & Fuels

Influence of the Fin Shape on Heat Transport in Phase Change Material Heat Sink with Constant Heat Loads

Nadezhda S. Bondareva et al.

Summary: The study focused on the numerical analysis of phase change materials and finned heat sinks for heat transfer enhancement in electronic cabinets. Results showed that the complex finned heat sink design can significantly accelerate the melting process and reduce temperatures.

ENERGIES (2021)

Article Chemistry, Analytical

A Computational Fluid Dynamic Study on Efficiency of a Wavy Microchannel/Heat Sink Containing Various Nanoparticles

Yacine Khetib et al.

Summary: This paper redesigns a common micro-heat sink and uses nanofluids as cooling fluids for simulation and comparison. Results show that the wavy microchannel heat sink design reduces temperatures, with Al2O3 nanofluid being more suitable for temperature uniformity and thermal resistance, while increasing nanoparticle volume percentage helps with temperature but also increases pumping power.

MICROMACHINES (2021)

Article Energy & Fuels

Numerical Study of Fluid Flow and Heat Transfer Characteristics in a Cone-Column Combined Heat Sink

Wei Zheng et al.

Summary: The study introduces an enhanced heat transfer factor E to evaluate the comprehensive heat transfer performance of microchannel heat sinks, and shows that a uniform arrangement of cones in the cone-column combined heat sink can improve the flow state of the cooling medium, enhancing heat transfer. Results indicate that the cone-column combined heat sink has significantly better comprehensive heat transfer performance compared to circular microchannels.

ENERGIES (2021)

Article Thermodynamics

Multi-objective optimization and multi-factors analysis of the thermal/hydraulic performance of the bionic Y-shaped fractal heat sink

Ziqiang He et al.

Summary: In this study, optimal structures of fractal heat sinks were obtained using the constructal theory and genetic algorithm, and Taguchi experimental design was employed for CFD simulation to investigate the impact factors on performance. The results showed that heat flux had the highest contributions to maximum temperature and comprehensive performance, while the fractal number had the highest contribution to pressure drop.

APPLIED THERMAL ENGINEERING (2021)

Article Computer Science, Information Systems

Thermo-Fluid Characteristics of Microchannel Heat Sink With Multi-Configuration NACA 2412 Hydrofoil Ribs

Shahzad Ali et al.

Summary: In this study, hydrofoil ribs made from NACA 2412 profile were mounted in a novel way at all walls of microchannel heat sink to improve its thermo-hydraulic characteristics. Different configurations were tested, and it was found that the best performance is achieved when rib spacing becomes equal to cord length. The study also showed that staggered configuration outperformed aligned configuration.

IEEE ACCESS (2021)

Article Chemistry, Analytical

Numerical and Experimental Study of Microchannel Performance on Flow Maldistribution

Jojomon Joseph et al.

MICROMACHINES (2020)

Article Chemistry, Multidisciplinary

Cooling Performance of a Novel Circulatory Flow Concentric Multi-Channel Heat Sink with Nanofluids

Ravindra Jilte et al.

NANOMATERIALS (2020)

Article Thermodynamics

Experimental investigation of laminar flow and heat transfer characteristics in square minichannels with twisted tapes

Zhenfei Feng et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Article Multidisciplinary Sciences

Co-designing electronics with microfluidics for more sustainable cooling

Remco van Erp et al.

NATURE (2020)

Article Thermodynamics

Nusselt number and development length correlations for laminar flows of water and air in microchannels

Mohamed S. El-Genk et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Article Thermodynamics

Effect of microchannel heat sink configuration on the thermal performance and pumping power

M. P. Vasilev et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Review Engineering, Multidisciplinary

A review of liquid flow and heat transfer in microchannels with emphasis to electronic cooling

Aparesh Datta et al.

SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2019)

Article Chemistry, Physical

Numerical simulation of nanofluids for improved cooling efficiency in a 3D copper microchannel heat sink (MCHS)

L. Snoussi et al.

PHYSICS AND CHEMISTRY OF LIQUIDS (2018)

Article Thermodynamics

A single phase hybrid micro heat sink using impinging micro-jet arrays and microchannels

A. J. Robinson et al.

APPLIED THERMAL ENGINEERING (2018)

Article Nanoscience & Nanotechnology

Integrated nanomaterials for extreme thermal management: a perspective for aerospace applications

Michael T. Barako et al.

NANOTECHNOLOGY (2018)

Article Materials Science, Multidisciplinary

Flow and heat transfer behaviour of nanofluids in microchannels

James Bowers et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2018)

Review Green & Sustainable Science & Technology

Microchannel cooling of concentrator photovoltaics: A review

Nicholas Gilmore et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Article Materials Science, Multidisciplinary

Flow and heat transfer behaviour of nanofluids in microchannels

James Bowers et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2018)

Article Thermodynamics

A comprehensive study on heat transfer enhancement in microchannel heat sink with secondary channel

Wan Mohd Arif Aziz Japar et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2018)

Article Thermodynamics

Selecting Optimal Parallel Microchannel Configuration(s) for Active Hot Spot Mitigation of Multicore Microprocessors in Real Time

Lakshmi Sirisha Maganti et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2017)

Article Engineering, Multidisciplinary

Fluid flow and heat transfer of nanofluids in microchannel heat sink with V-type inlet/outlet arrangement

Ayoub Abdollahi et al.

ALEXANDRIA ENGINEERING JOURNAL (2017)

Article Thermodynamics

Analysis of micro-channel heat sinks with rectangular-shaped flow obstructions

Gongnan Xie et al.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2016)

Article Thermodynamics

Heat transfer enhancement in a micro-channel cooling system using cylindrical vortex generators

Mushtaq T. Al-Asadi et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2016)

Article Thermodynamics

Numerical modeling and thermal optimization of a single-phase flow manifold-microchannel plate heat exchanger

M. A. Arie et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

Review Thermodynamics

A Review of Heat Transfer Enhancement through Flow Disruption in a Microchannel

Anupam Dewan et al.

JOURNAL OF THERMAL SCIENCE (2015)

Proceedings Paper Thermodynamics

Numerical Simulation of Heat Transfer Enhancement in Periodic Converging-Diverging Microchannel

Abhishek Kumar Chandra et al.

INTERNATIONAL CONFERENCE ON COMPUTATIONAL HEAT AND MASS TRANSFER (ICCHMT) - 2015 (2015)

Article Thermodynamics

Parametric study on the performance of double-layered microchannels heat sink

J. M. Wu et al.

ENERGY CONVERSION AND MANAGEMENT (2014)

Article Thermodynamics

Heat transfer enhancement with laminar pulsating nanofluid flow in a wavy channel

Unal Akdag et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2014)

Article Thermodynamics

Convective heat transfer and mixing enhancement in a microchannel with a pillar

Yingying Wang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)

Review Green & Sustainable Science & Technology

Thermal and hydrodynamic analysis of microchannel heat sinks: A review

Ahmed Mohammed Adham et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)

Review Green & Sustainable Science & Technology

A comprehensive review on passive heat transfer enhancements in pipe exchangers

S. Liu et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)

Article Thermodynamics

Aquasar: A hot water cooled data center with direct energy reuse

Severin Zimmermann et al.

ENERGY (2012)

Article Engineering, Electrical & Electronic

Analysis of Flow and Thermal Performance of a Water-Cooled Transversal Wavy Microchannel Heat Sink for Chip Cooling

Gongnan Xie et al.

JOURNAL OF ELECTRONIC PACKAGING (2012)

Article Physics, Applied

Specific Heat Capacity of Gallium Nitride

Sanghyun Lee et al.

JAPANESE JOURNAL OF APPLIED PHYSICS (2011)

Review Physics, Condensed Matter

A review of passive thermal management of LED module

Ye Huaiyu et al.

JOURNAL OF SEMICONDUCTORS (2011)

Article Engineering, Manufacturing

Low-Temperature Two-Phase Microchannel Cooling for High-Heat-Flux Thermal Management of Defense Electronics

Jaeseon Lee et al.

IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES (2009)

Article Engineering, Manufacturing

Design and Optimization of Single-Phase Liquid Cooled Microchannel Heat Sink

Laxmidhar Biswal et al.

IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES (2009)

Article Engineering, Electrical & Electronic

Experimental investigation of heat transfer performance for a novel microchannel heat sink

Y. Wang et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2008)

Article Thermodynamics

Optimization design of microchannel cooling heat sink

Baodong Shao et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2007)

Article Thermodynamics

Microchannel heat sinks: An overview of the state-of-the-art

I Hassan et al.

MICROSCALE THERMOPHYSICAL ENGINEERING (2004)

Article Optics

Fabrication of high-aspect-ratio microstructures using excimer laser

AA Tseng et al.

OPTICS AND LASERS IN ENGINEERING (2004)

Article Thermodynamics

Evolution of microchannel flow passages - Thermohydraulic performance and fabrication technology

SG Kandlikar et al.

HEAT TRANSFER ENGINEERING (2003)