4.8 Article

Two-step pyrolysis to anchor ultrahigh-density single-atom FeN5 sites on carbon nitride for efficient Fenton-like catalysis near 0?

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

Mineral Modulated Single Atom Catalyst for Effective Water Treatment

Xiongbo Dong et al.

Summary: Single atom catalysts (SACs) have emerged as a hot topic in environmental remediation. This study presents a novel Si, N co-coordinated cobalt SAC with a 3D free-standing architecture, which is tailored using natural mineral diatomite as a Si source and porous template. The catalyst exhibits excellent performance in peroxymonosulfate activation for wastewater treatment, surpassing previously reported catalysts. The work provides a new strategy for SACs development and enhances the understanding of the role of templates in spatial coordination configuration of SACs.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Engineering, Environmental

Single atom Fe-dispersed graphitic carbon nitride (g-C3N4) as a highly efficient peroxymonosulfate photocatalytic activator for sulfamethoxazole degradation

Gang Zhao et al.

Summary: A highly efficient single atom Fe-dispersed catalyst with Fe-N-4 coordination structure was synthesized for peroxymonosulfate (PMS) activation and sulfamethoxazole (SMX) degradation. The catalyst showed excellent performance in PMS activation and SMX removal, with a high turnover efficiency and good stability. Identification of reaction active species and proposed degradation mechanism for SMX provide valuable insights for sulfate radical-based advanced oxidation processes.

CHEMICAL ENGINEERING JOURNAL (2022)

Review Engineering, Environmental

Aqueous Iron(IV)-Oxo Complex: An Emerging Powerful Reactive Oxidant Formed by Iron(II)-Based Advanced Oxidation Processes for Oxidative Water Treatment

Zhen Wang et al.

Summary: High-valent iron(IV)-oxo complexes play a significant role as reactive intermediates in various chemical and biological systems. Among them, the aqueous iron(IV)-oxo complex ((FeaqO2+)-O-IV) is the simplest but also the most powerful ferryl ion species, showing high reactivity and selectivity in oxidizing water treatment. This review provides a comprehensive understanding of the chemical properties, oxidation mechanisms, and kinetics of (FeaqO2+)-O-IV, with comparisons to other free radicals. Additionally, the potential role of (FeaqO2+)-O-IV in Fe-aq(2+)-based advanced oxidation processes (AOPs) is discussed, challenging the conventional view that free radicals dominate these AOPs.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2022)

Article Engineering, Environmental

Elucidating the Mechanistic Origin of a Spin State-Dependent FeNx-C Catalyst toward Organic Contaminant Oxidation via Peroxymonosulfate Activation

Bofan Zhang et al.

Summary: Single-atom FeNx-C catalyst with Fe-pyridinic N-4 structure exhibited superior catalytic activity in peroxymonosulfate (PMS) activation for organic contaminant oxidation. X-ray absorption spectroscopy and Fe-57 Mossbauer spectroscopy were used to validate various Fe species and their relative amounts in the catalyst. The study revealed positive correlations between relative content of high-spin state species and catalytic performance, providing insights into reactive species generation and electron transfer pathways in the FeNx-C/PMS system.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2022)

Article Engineering, Environmental

Single-Atom Cobalt Incorporated in a 2D Graphene Oxide Membrane for Catalytic Pollutant Degradation

Xuanhao Wu et al.

Summary: A new graphene oxide-based membrane architecture was developed to efficiently degrade a specific pollutant using cobalt catalysts loaded in nanoscale pore walls. The use of a unique synthesis procedure enabled the dispersion of cobalt atoms uniformly, maintaining the membrane's structure and functionality. This study presents a critical advancement in developing catalytic membranes that combine membrane filtration and advanced oxidation processes in a more efficient single-step treatment.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2022)

Article Chemistry, Physical

Amorphous cobalt oxide decorated halloysite nanotubes for efficient sulfamethoxazole degradation activated by peroxymonosulfate

Zhuang He et al.

Summary: A new hollow nanotube material, 30% Co-CHNTs, was prepared as a catalyst for the degradation of sulfamethoxazole (SMX) using peroxymonosulfate (PMS) activation. The material exhibited high SMX degradation rates and stability in natural organic matter solutions, making it a potential candidate for antibiotic wastewater treatment.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Article Engineering, Environmental

Enhanced catalytic sulfamethoxazole degradation via peroxymonosulfate activation over amorphous CoSx@SiO2 nanocages derived from ZIF-67

Fei Wang et al.

Summary: The amorphous CoSx@SiO2 nanocages were successfully synthesized as heterogeneous catalysts, exhibiting high degradation efficiency towards SMX under PMS activation and improved removal efficiency in simulated wastewater containing chloride ions and low-concentration bicarbonate ions. The possible degradation mechanism was proposed based on quantitative analysis of residual substances and sulfate radicals generated in the PMS system.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Engineering, Environmental

Co/N co-doped carbonized wood sponge with 3D porous framework for efficient peroxymonosulfate activation: Performance and internal mechanism

Yang Yu et al.

Summary: The study successfully prepared cobalt and nitrogen co-doped carbonized wood sponge material for PMS activation to degrade SMX, showing remarkable catalytic activity. The research revealed the unique mechanism of wood sponge-based functional materials in PMS activation through both radical and non-radical pathways.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Engineering, Chemical

Ferric nitrate/dopamine/melamine-derived nitrogen doped carbon material as the activator of peroxymonosulfate to degrade sulfamethoxazole

Xinyao Liu et al.

Summary: Nitrogen-doped carbon materials were used to activate peroxymonosulfate for degrading organic pollutants. The Fe-DA-CN catalyst exhibited the highest activity, with Fe(NO3)3·9H2O promoting graphitization and melamine increasing nitrogen content. The catalyst showed excellent performance in removing sulfamethoxazole and demonstrated good stability in repeated use experiments.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Chemistry, Physical

Constructing surface micro-electric fields on hollow single-atom cobalt catalyst for ultrafast and anti-interference advanced oxidation

Changqing Zhu et al.

Summary: This study presents a novel '4H' carbon polyhedral catalyst for the degradation of bisphenol A using activated peroxymonosulfate. The catalyst demonstrates high removal efficiency and excellent anti-interference ability.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

Article Chemistry, Physical

Engineering the low-coordinated single cobalt atom to boost persulfate activation for enhanced organic pollutant oxidation

Xiaoying Liang et al.

Summary: Two atomically dispersed cobalt catalysts with different nitrogen coordination numbers were synthesized and compared for activating peroxydisulfate for bisphenol A degradation. The catalyst with lower coordination number showed higher activity and stability, providing a promising approach for wider environmental applications.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

Article Chemistry, Multidisciplinary

Coordination Number Dependent Catalytic Activity of Single-Atom Cobalt Catalysts for Fenton-Like Reaction

Xiaoying Liang et al.

Summary: In this study, a series of atomically dispersed cobalt catalysts with different coordination numbers were synthesized and their performance in peroxymonosulfate (PMS) conversion was explored. The results showed that the catalytic specific activity of the catalysts depended on the coordination number of single Co atom, with the lowest-coordinated Co-N-2 catalyst exhibiting the highest specific activity. It was found that reducing the coordination number increased the electron density of the single Co atom, which governed the Fenton-like performance of the catalysts. Additionally, the entire Co-pyridinic N-C motif was identified as the active center for PMS conversion, with the single Co atom, pyridinic N-bonded C atoms, and nitrogen vacancy neighboring the unsaturated Co-pyridinic N-2 moiety contributing to PMS reduction and oxidation.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Chemistry, Physical

Activating peroxymonosulfate by N and O co-doped porous carbon for efficient BPA degradation: A re-visit to the removal mechanism and the effects of surface unpaired electrons

Yong-Li He et al.

Summary: In this study, N and O co-doping carbon materials were used to activate peroxymonosulfate (PMS) for bisphenol (BPA) degradation. The study revealed the importance of controlling the amount of unpaired electrons in carbon materials for their activity.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

Article Green & Sustainable Science & Technology

Enhanced utilization efficiency of peroxymonosulfate via water vortex-driven piezo-activation for removing organic contaminants from water

Chuan Yu et al.

Summary: This study utilizes the water vortex-driven piezoelectric effect to activate PMS for efficient removal of organic contaminants. The results demonstrate that the presence of MoS2 under a water vortex can trigger a piezoelectric potential and generate abundant free electrons to activate PMS and generate various active species for degradation of organic contaminants.

ENVIRONMENTAL SCIENCE AND ECOTECHNOLOGY (2022)

Article Chemistry, Multidisciplinary

Almost 100 % Peroxymonosulfate Conversion to Singlet Oxygen on Single-Atom CoN2+2 Sites

Xueyue Mi et al.

Summary: This study demonstrates a strategy to regulate the generation of reactive oxygen species by atomically dispersed cobalt anchored on nitrogen-doped carbon, with singlet oxygen being the predominant reactive oxygen species. The generated singlet oxygen is capable of degrading various organic pollutants efficiently across a broad pH range, providing new theoretical support for the singlet oxygen generation mechanism in peroxymonosulfate activation.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Physical

Activation of peroxymonosulfate via mediated electron transfer mechanism on single-atom Fe catalyst for effective organic pollutants removal

Pijun Duan et al.

Summary: The study fabricated atomically dispersed Fe on g-C3N4 for peroxymonosulfate activation to efficiently degrade o-phenylphenol. The results showed that mediated electron transfer was identified as the dominated mechanism, providing new possibilities for implementing non-radical dominated process at the device level.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Article Chemistry, Physical

Novel lignin-based single atom catalysts as peroxymonosulfate activator for pollutants degradation: Role of single cobalt and electron transfer pathway

Yuanfeng Qi et al.

Summary: A nitrogen coordinated Co single-atom catalyst was fabricated using lignin as carbon sources through a one-pot pyrolytic strategy. The isolated Co atoms in the SA Co-N/C architecture served as the main active sites for naproxen degradation, exhibiting exceptional performance with a high turnover frequency. Electron transfer induced by the single-atom Co sites was identified as the dominated mechanism for the NPX degradation.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Article Engineering, Environmental

Iron-Based Dual Active Site-Mediated Peroxymonosulfate Activation for the Degradation of Emerging Organic Pollutants

Shizong Wang et al.

Summary: This study demonstrated the successful construction of a highly efficient Fe-N-O-GC-350 catalyst with superior PMS activation capability and high degradation rate towards SMX. The dual active sites of Fe2N and SA-Fe enhanced the adsorption capacity of PMS, while both surface-bound reactive species and singlet oxygen contributed to the degradation of SMX.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

Article Chemistry, Physical

Cobalt single atom site catalysts with ultrahigh metal loading for enhanced aerobic oxidation of ethylbenzene

Yu Xiong et al.

Summary: The study successfully synthesized cobalt single atom site catalysts supported on carbon nitride with high metal loading. These catalysts exhibited excellent catalytic properties for the oxidation of ethylbenzene in air, showing high turnover frequency, selectivity, and stability. DFT calculations revealed the low energy barrier and high resistance to water of these catalysts, contributing to their robust catalytic performance.

NANO RESEARCH (2021)

Article Engineering, Environmental

Single-Atom Fe Catalyst Outperforms Its Homogeneous Counterpart for Activating Peroxymonosulfate to Achieve Effective Degradation of Organic Contaminants

Kun Qian et al.

Summary: In this study, FeN4 structures were constructed on carbon nanotubes to obtain single-atom catalysts, which successfully generated reactive iron species (RFeS) for the selective degradation of emerging organic contaminants (EOCs) over a wide pH range. The results revealed the mechanism of RFeS generation and the important role of carbon nanotubes in enhancing the reactivity of FeN4=O intermediates.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

Article Engineering, Chemical

Degradation of sulfamethoxazole using peroxymonosulfate activated by cobalt embedded into N, O co-doped carbon nanotubes

Shizong Wang et al.

Summary: In this study, cobalt embedded into oxygen and nitrogen co-doped CNTs was prepared by pyrolysis for activating peroxymonosulfate (PMS) to degrade sulfamethoxazole. The presence of oxygen precursor significantly influenced the catalytic activity of Co@N-O-CNTs. Experimental results indicated that nitrogen, oxygen, and cobalt in the Co@N-O-CNTs structure served as active sites for PMS activation.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Engineering, Environmental

Atomically Dispersed Cobalt Sites on Graphene as Efficient Periodate Activators for Selective Organic Pollutant Degradation

Yangke Long et al.

Summary: Pollutant degradation via IO4--based AOPs can be optimized using single-atomic metal activation, as demonstrated by the successful activation of IO4- for organic pollutant degradation using N-rGO-CoSA activators. The efficient activation process is mediated by Co-N coordination sites and the conductive graphene matrix, enhancing the overall oxidation capacity.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

Article Chemistry, Multidisciplinary

Iodide-Induced Fragmentation of Polymerized Hydrophilic Carbon Nitride for High-Performance Quasi-Homogeneous Photocatalytic H2O2 Production

Huinan Che et al.

Summary: The TP-PCN photocatalyst with abundant edge active sites exhibits superior H2O2 generation rate, providing a new strategy for designing efficient photocatalysts. Furthermore, DFT calculations suggest that TP-PCN is more favorable for electron transiting, optimizing O-2 activation and reducing the energy barrier of H2O2 formation.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Multidisciplinary

Regulating Local Electron Density of Iron Single Sites by Introducing Nitrogen Vacancies for Efficient Photo-Fenton Process

Lina Su et al.

Summary: The study demonstrates that defect engineered iron single atom photocatalysts can improve the efficiency of H2O2 activation, with electron density highly concentrated around Fe atoms to enhance oxidation reaction efficiency.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Multidisciplinary

Carbon Nitride Supported High-Loading Fe Single-Atom Catalyst for Activating of Peroxymonosulfate to Generate 1O2 with 100 % Selectivity

Long-Shuai Zhang et al.

Summary: A novel catalyst Fe-1/CN was developed to achieve 100% selective production of O-1(2) through activation of PMS, enabling highly selective and efficient degradation of organic pollutants.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Multidisciplinary

Activity Trends and Mechanisms in Peroxymonosulfate-Assisted Catalytic Production of Singlet Oxygen over Atomic Metal-N-C Catalysts

Yun Gao et al.

Summary: A series of carbon-supported atomic metal-N-C catalysts were synthesized to investigate their catalytic activity trends and mechanisms, with Fe-SAC demonstrating the best catalytic performance for organic pollutant degradation. The study provides atomic-scale understanding of catalytic trends and mechanisms for PMS-assisted reactive oxygen species production via M-SACs, guiding the development of efficient catalytic materials.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Physical

Engineered carbon supported single iron atom sites and iron clusters from Fe-rich Enteromorpha for Fenton-like reactions via nonradical pathways

Lijng Peng et al.

Summary: Enteromorpha, a seawater pollutant, was converted into a functional carbocatalyst for Fenton-like reactions. The Enteromorpha-derived Fe-N-C exhibited high activity in activating peroxymonosulfate for organic pollutant degradation. Single Fe atoms played a crucial role as dominant reactive sites in forming highly oxidizing Fe-IV=O and Fe-V=O species.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Article Chemistry, Multidisciplinary

Construction of piezoelectric BaTiO3/MoS2 heterojunction for boosting piezo-activation of peroxymonosulfate

Yanxi Chen et al.

Summary: A piezoelectric BaTiO3/MoS2 (BTO/MS) heterojunction was constructed to inhibit the recombination of charge carriers, enhance the activation of peroxymonosulfate (PMS), and improve the removal efficiency of antibiotic ornidazole pollutants. The synergistic effect of piezocatalysis and PMS oxidation was observed during the process of ornidazole degradation.

CHINESE CHEMICAL LETTERS (2021)

Article Engineering, Environmental

Unraveling the High-Activity Origin of Single-Atom Iron Catalysts for Organic Pollutant Oxidation via Peroxymonosulfate Activation

Yaowen Gao et al.

Summary: Single-atom iron catalyst prepared via a cascade anchoring method exhibits exceptional catalytic activity in peroxymonosulfate (PMS) conversion for organic pollutant oxidation, with the high-activity origin attributed to the Fe-pyridinic N-4 moiety that significantly increases active sites for PMS activation.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

Article Engineering, Environmental

Synthesis of Fe0/Fe3O4@porous carbon through a facile heat treatment of iron-containing candle soots for peroxymonosulfate activation and efficient degradation of sulfamethoxazole

Yating Yan et al.

Summary: The study focuses on developing efficient and reusable Fe-based catalysts for persulfate-based advanced oxidation processes. The iron-containing candle soots were utilized to prepare magnetically recyclable Fe-0/Fe3O4@porous carbon catalysts with high catalytic activity for sulfamethoxazole degradation. The system demonstrated rapid degradation of the target pollutant, magnetically recyclable properties, and good stability for multiple cycles.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Chemistry, Physical

Spin-State-Dependent Peroxymonosulfate Activation of Single-Atom M-N Moieties via a Radical-Free Pathway

Jie Miao et al.

Summary: Transition metal catalysts anchored on carbon nanotubes were developed to efficiently activate peroxymonosulfate for nonradical oxidation. The study found that the spin state of the catalyst strongly influenced its catalytic activity, with higher spin states promoting electron transfer and enhancing the oxidation capacity of reactive species. These findings advance the mechanistic understanding of transition metal-mediated persulfate activation and contribute to the development of efficient spintronic catalysts for environmental applications.

ACS CATALYSIS (2021)

Review Chemistry, Multidisciplinary

Single-atom catalysis in advanced oxidation processes for environmental remediation

Yanan Shang et al.

Summary: Carbon-based single atom catalysts show high performances and efficiency in environmental catalysis, but there is a lack of comprehensive research on their catalytic sites and mechanisms in advanced oxidation processes, which is necessary for further exploration.

CHEMICAL SOCIETY REVIEWS (2021)

Article Engineering, Environmental

Peroxymonosulfate activation by Co9S8@ S and N co-doped biochar for sulfamethoxazole degradation

Shizong Wang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Engineering, Environmental

Efficient degradation of sulfamethoxazole by CuCo LDH and LDH@fibers composite membrane activating peroxymonosulfate

Ruonan Guo et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Engineering, Environmental

The Intrinsic Nature of Persulfate Activation and N-Doping in Carbocatalysis

Wei Ren et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)

Article Engineering, Environmental

Peroxymonosulfate Activation by Fe-Co-O-Codoped Graphite Carbon Nitride for Degradation of Sulfamethoxazole

Shizong Wang et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)

Article Chemistry, Multidisciplinary

Confinement of CoP Nanoparticles in Nitrogen-Doped Yolk-Shell Porous Carbon Polyhedron for Ultrafast Catalytic Oxidation

Changqing Zhu et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Multidisciplinary

Silver Single Atom in Carbon Nitride Catalyst for Highly Efficient Photocatalytic Hydrogen Evolution

Xun-Heng Jiang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Chemistry, Multidisciplinary

A Graphene-Supported Single-Atom FeN5 Catalytic Site for Efficient Electrochemical CO2 Reduction

Huinian Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Article Chemistry, Multidisciplinary

Molecule Self-Assembly Synthesis of Porous Few-Layer Carbon Nitride for Highly Efficient Photoredox Catalysis

Yuting Xiao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Article Chemistry, Multidisciplinary

Single Cobalt Atoms Anchored on Porous N-Doped Graphene with Dual Reaction Sites for Efficient Fenton-like Catalysis

Xuning Li et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)