Related references
Note: Only part of the references are listed.
Article
Chemistry, Multidisciplinary
Wenyong Chen et al.
Summary: In this study, a maltose-based hybrid electrolyte with hydrogen bond-functionalized massive solvation modules is constructed to address the poor cyclic stability of zinc-ion batteries. The solvation modules promote uniform deposition of zinc at the anode interface and hinder parasitic reactions through hydrogen bond confinement. Meanwhile, they prevent structural collapse at the cathode interface and maintain low interfacial activation energy during cycling. The resultant full batteries retain 84.2% of their initial specific capacity after 400 continuous cycles at a low current density of 50 mA g(-1).
ADVANCED FUNCTIONAL MATERIALS
(2022)
Article
Chemistry, Physical
Tian Chen Li et al.
Summary: Adding carbonyl-containing organic solvents can enhance the reversibility of zinc-ion batteries and improve their cycling stability and capacity retention.
ADVANCED ENERGY MATERIALS
(2022)
Article
Chemistry, Physical
Daliang Han et al.
Summary: By using a low-cost ammonium acetate (NH4OAc) additive, a self-regulated zinc/electrolyte interface is built to address the issues of rapid performance deterioration of zinc anodes. The additive induces a dynamic electrostatic shielding layer around the zinc protuberance, promoting uniform zinc deposition, and acts as an interfacial pH buffer to suppress side reactions and precipitation of insoluble by-products. These findings pave the way for practical zinc batteries.
ADVANCED ENERGY MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Min Yang et al.
Summary: This study presents a binary hydrate-melt electrolyte as a solution to improve the cycling performance of zinc-ion batteries with metal zinc anodes. By adjusting the solvation structure of zinc ions, the side reactions on the anodes can be effectively suppressed, leading to higher coulombic efficiency. Experimental results demonstrate that the use of this electrolyte can achieve better cycling performance.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Fangwang Ming et al.
Summary: This work proposes a hybrid electrolyte induced by the salting-in effect as an effective strategy to achieve a highly reversible zinc anode with good stability and compatibility. By altering the solvation structure and reducing parasitic side reactions, this electrolyte ensures a stable zinc anode with excellent cycling stability.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
(2022)
Article
Chemistry, Physical
Guoqiang Ma et al.
Summary: In this study, the stability of metallic zinc anode in aqueous batteries was significantly improved by using a non-concentrated aqueous zinc trifluoromethanesulfonate electrolyte with 1,2-dimethoxyethane additive. The introduction of DME disrupted the original hydrogen-bond network of water and created a unique Zn2+-solvation structure, effectively suppressing water-induced side reactions. The in-situ formation of an organic-inorganic hybrid interphase on the zinc anode further prevented water penetration and dendrite growth. This novel electrolyte enabled the zinc anodes to achieve unprecedented cycling stability and high reversibility.
ENERGY STORAGE MATERIALS
(2022)
Article
Chemistry, Physical
Tao Wang et al.
Summary: Manipulating the hydrogen-bond network of aqueous electrolyte through solvents can suppress the unwanted parasitic hydrogen evolution reaction, leading to improved energy density of batteries.
ENERGY STORAGE MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Jing Xu et al.
Summary: The introduction of silk fibroin (SF) as an electrolyte additive for aqueous zinc-ion batteries can form a stable and self-healable protective film, which promotes homogeneous zinc deposition and suppresses parasitic reactions, leading to improved cycle life of the batteries.
Article
Chemistry, Multidisciplinary
Pinji Wang et al.
Summary: Multifunctional interfacial engineering on the Zn anode, through the spontaneous construction of a carbonyl-containing layer (Zn@ZCO), effectively suppresses dendrite growth, hydrogen evolution, and sluggish kinetics associated with Zn deposition. The Zn@ZCO anode exhibits a long cycling lifespan, dendrite-free surface, and excellent rate performance in aqueous zinc-ion batteries.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Zhexuan Liu et al.
Summary: This study demonstrates the significant role of interfacial H+ concentration and Mn2+ migration steric hindrance in the high-efficiency deposition/dissolution chemistry of zinc-manganese batteries, and the introduction of formate anions can enhance capacity and electrochemical reversibility.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Kang Zhao et al.
Summary: This study demonstrates the potential of cyclodextrins (CDs) as electrolyte additives for rechargeable Zn batteries. The addition of alpha-CD improves the stability and kinetics of Zn plating and stripping by adsorbing on the Zn surface and suppressing water-induced side reactions. This finding provides insight into the use of supramolecular macrocycles for enhancing the performance of aqueous battery chemistry.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
(2022)
Article
Chemistry, Physical
Yun Zhong et al.
Summary: In this study, a monosodium glutamate (MSG) electrolyte additive is introduced to reconstruct the Zn anode/electrolyte interface and suppress Zn dendrite growth and H-2 evolution. The adsorbed glutamate anions can selectively inhibit side reactions and promote [Zn(H2O)(6)](2+) desolvation, leading to uniform and stable Zn deposition.
Article
Chemistry, Physical
Meijia Qiu et al.
Summary: This article introduces a method to improve the long-term reversible plating/stripping of zinc anodes by introducing sorbitol as an additive. The research found that sorbitol can promote the preferred (002) orientation growth on the zinc anode surface, which facilitates stable inversion of the zinc deposition. Additionally, sorbitol modulates the solvation structure of Zn2+ and reduces common side reactions. Experimental results demonstrate the excellent stability of the zinc anode in zinc-zinc symmetric cells and other types of full cells.
ENERGY STORAGE MATERIALS
(2022)
Article
Engineering, Environmental
Jiawei Gu et al.
Summary: A new strategy for developing high-performance organic compound electrodes for efficient energy storage devices was discovered, using nitrogen-doped carbon and polyaniline nanohybrids to achieve excellent electrochemical performance and long cycle life in zinc-ion batteries. Strong hydrogen bond interactions were utilized to regulate the local protonation environment of PANI and promote redox reactions.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Electrochemistry
Mingming Wang et al.
Summary: This study constructs a Zn/Bi electrode by in-situ growth of a Bi-based energizer upon the Zn metal surface using a replacement reaction. Experimental and theoretical calculations demonstrate that the Bi-based energizer composed of metallic Bi and ZnBi alloy contributes significantly to Zn plating/stripping due to strong adsorption energy and fast ion transport rates. The Zn/Bi electrode not only avoids Zn dendrite growth but also improves Zn anode anti-corrosion performance.
Article
Electrochemistry
Ziqing Wang et al.
Summary: In this study, high-capacity and high-stability aqueous zinc-vanadium batteries were achieved by simultaneously regulating the ions in the electrolyte. Na+ cations suppressed cathode dissolution and restrained Zn dendrite growth, while ClO4- anions formed a protective layer to decrease Zn dendrites and H2 evolution. The battery exhibited durable performance during long-term cycling.
Article
Chemistry, Multidisciplinary
Du Yuan et al.
Summary: Texturing zinc has been demonstrated as an effective approach to address the issue of zinc dendrite formation, showing highly reversible stripping/plating at high current density without dendrite characteristics. The development of anion-induced zinc texturing provides a pathway to explore zinc chemistry and advance aqueous rechargeable batteries.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2021)
Review
Chemistry, Physical
Zhehan Yi et al.
Summary: Zinc-ion batteries are considered promising candidates for next-generation energy storage systems due to their high safety, resource availability, and environmental friendliness. However, the instability of the Zn metal anode has hindered their reliable deployment, and efforts have been made to overcome this through electrode structure design, interface modification, and electrolyte/separator optimization. Understanding and categorizing these strategies based on their intrinsic mechanisms are important for the development of novel Zn metal anodes for ZIBs.
ADVANCED ENERGY MATERIALS
(2021)
Article
Chemistry, Physical
Weijun Zhou et al.
Summary: Low-cost sodium lignosulfonate was used as an electrolyte additive to improve the cyclability of rechargeable zinc-ion batteries, resulting in enhanced capacity retention and cycle life.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2021)
Article
Electrochemistry
Xiaomin Zeng et al.
Summary: The study focuses on improving the performance of zinc anodes by constructing a polyacrylamide interphase, which enables homogeneous nucleation and high coulombic efficiency, leading to an extended lifespan of the battery.
ELECTROCHIMICA ACTA
(2021)
Review
Chemistry, Physical
Cunxin Liu et al.
Summary: With the increasing demand for large-scale energy storage, high safety and low cost rechargeable zinc-ion batteries are considered as potential substitutes for lithium-ion batteries. However, fundamental issues hinder the development of zinc-based energy storage systems. The electrolyte plays a crucial role in ensuring the compatibility and cycling of battery components, and strategies to address issues such as cathode dissolution, zinc dendrites, corrosion, and hydrogen evolution are discussed.
ACS ENERGY LETTERS
(2021)
Article
Chemistry, Physical
Weina Xu et al.
Summary: By adding liquid alloy GaSnIn as an electrolyte additive, a gradient solid electrolyte interface (SEI) was successfully achieved, with flexible surface-rich polycarbonate moieties and low Li+ partial molar volume inorganic LiF-rich core, leading to improved cycling performance of lithium metal batteries (LMBs), especially at high rates (10 mA/cm2). This approach effectively suppressed dendrite formation on the lithium metal anode, reducing voltage polarization and improving Coulombic efficiency, resulting in high average coulombic efficiency (99.06%) at long cycle life (>2500 cycles) for the protected Li metal anode at high areal capacity (3 mAh/cm2).
Article
Chemistry, Physical
Minghe Luo et al.
Summary: This study utilized a chelating agent, BIS-TRIS, to regulate the solvation sheath structure of Zn2+ in aqueous Zn-ion batteries, restricting Zn2+ 2D diffusion and inhibiting dendrite growth. Partial substitution of water with chelator also suppressed the hydrogen evolution reaction. This strategy led to the achievement of a stable Zn cell and aqueous Zn/MnO2 battery.
ENERGY STORAGE MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Zehai Chen et al.
Summary: Arginine (Arg) can inhibit irregular zinc dendrite growth and induce uniform zinc deposition, significantly improving the cycle life of aqueous zinc-ion batteries. The arginine cations (Arg(+)) increase the overpotential for zinc dendrite nucleation and result in uniform zinc deposition.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING
(2021)
Article
Chemistry, Physical
Mengdie Yan et al.
Summary: The addition of PEO in aqueous electrolytes has been found to improve the cycling stability and Coulombic efficiency of Zn anodes, but the overpotential and long-term stability are significantly influenced by different anions. The choice of salt anions in aqueous electrolytes with PEO additives plays a crucial role in tuning the reaction kinetics and stability of Zn anodes.
Article
Chemistry, Multidisciplinary
Huijun Yang et al.
Summary: The zeolite molecular sieve-modified aqueous electrolyte shows reduced water activity and side reactions, leading to improved performance at the electrolyte/electrode interface. This modification results in less hydrogen evolution and corrosion, as well as better cycle life and stability of the battery cells.
ADVANCED MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Peng Sun et al.
Summary: The addition of glucose in ZnSO4 electrolyte can improve the performance of Zn ion batteries by suppressing Zn dendrite growth and side reactions, enhancing stability.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2021)
Article
Electrochemistry
Xiulei Ji
Summary: Molten ZnCl2 hydrates are ionic liquids with intriguing physical and electrochemical properties, suitable for use as electrolytes in Zn metal batteries. Understanding the properties of molten ZnCl2 hydrates is crucial for designing high-performance electrolytes.
Article
Electrochemistry
Mingyan Chuai et al.
Summary: Electrolytic MnO2/Zn batteries co-regulated with transition metal ions show improved electrochemical performance in terms of deposition and stripping chemistries, with the incorporation of Co and Ni leading to more active electron states, faster charge-transfer kinetics, and better electrical conductivity. This approach offers a versatile strategy for enhancing the performance of aqueous electrolytic MnO2/Zn batteries in large-scale energy storage applications.
Article
Chemistry, Multidisciplinary
Xiaotan Zhang et al.
Summary: The CNG membrane, serving as a desolvation layer, effectively prevents water molecules from contacting the zinc anode, thereby delaying water-induced corrosion reactions and promoting redirected zinc deposition through deanionization shock. The flexible and toughened nature of the CNG membrane allows it to withstand strong forces and accommodate surface fluctuations of the zinc anode during plating/stripping processes, resulting in enhanced Coulombic efficiency and extended cycle life.
ENERGY & ENVIRONMENTAL SCIENCE
(2021)
Article
Chemistry, Multidisciplinary
Haibo Bi et al.
ADVANCED MATERIALS
(2020)
Review
Chemistry, Multidisciplinary
Qi Zhang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2020)
Article
Chemistry, Multidisciplinary
Canbin Deng et al.
ADVANCED FUNCTIONAL MATERIALS
(2020)
Article
Multidisciplinary Sciences
Sheng-Bo Wang et al.
NATURE COMMUNICATIONS
(2020)
Article
Energy & Fuels
Jie Xiao et al.
Article
Chemistry, Multidisciplinary
Zhiguo Hou et al.
Review
Chemistry, Physical
Ziyi Cao et al.
ADVANCED ENERGY MATERIALS
(2020)
Article
Chemistry, Multidisciplinary
Longsheng Cao et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
(2020)
Article
Nanoscience & Nanotechnology
Xiaoqiang Shan et al.
ACS APPLIED MATERIALS & INTERFACES
(2020)
Review
Chemistry, Multidisciplinary
Ning Zhang et al.
CHEMICAL SOCIETY REVIEWS
(2020)
Article
Chemistry, Multidisciplinary
Qi Zhang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2019)
Article
Multidisciplinary Sciences
Jingxu Zheng et al.
Article
Chemistry, Multidisciplinary
Zhiming Zhao et al.
ENERGY & ENVIRONMENTAL SCIENCE
(2019)
Review
Chemistry, Multidisciplinary
Xingguang Zhang et al.
