4.7 Article

A multi-vortex micromixer based on the synergy of acoustics and inertia for nanoparticle synthesis

Related references

Note: Only part of the references are listed.
Article Engineering, Environmental

Optimum design of micromixer for a non-Newtonian fluid by topology optimization

Xin Dong et al.

Summary: This paper investigates the design of the mixing unit in a T-shape micromixer considering non-Newtonian fluid effects using topology optimization. The optimized structures exhibit superior performance in maximizing mixing quality, especially for non-Newtonian fluids.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Analytical

Integrated microfluidic system for efficient DNA extraction using on-disk magnetic stirrer micromixer

Amin Dehghan et al.

Summary: Micromixers are essential microfluidic modules for fabricating integrated lab-on-chip devices for point-of-care applications. In this study, a magnetic stirrer on a rotating micro-structured disk is presented to mix liquids of a wide range of viscosities in low rotational velocities. The on-disk magnetic stirrer can be implemented in integrated micmfluidic platforms without affecting other modules, and it is a convenient choice for the cell lysis process due to high mixing indexes and considerable viscous stresses.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Article Chemistry, Analytical

Streaming-enhanced, chip-based biosensor with acoustically active, biomarker-functionalized micropillars: A case study of thrombin detection

Min Zhou et al.

Summary: This study introduces a novel strategy to enhance the sensitivity of chip-based biosensors by utilizing micro-streaming in an acoustofluidic device. By optimizing ultrasound parameters, better performance of the sensor chip can be achieved, and the detection limit is increased by one order of magnitude.

TALANTA (2021)

Article Chemistry, Analytical

A cost-effective serpentine micromixer utilizing ellipse curve

Xin Wang et al.

Summary: The serpentine micromixer with ellipse curve design shows improved mixing performance and reduced pressure drop compared to traditional zigzag and square-wave designs. By utilizing Dean vortices induced by the continuous change in flow direction through ellipse curves, this novel micromixer is more cost-effective for rapid mixing in complex microfluidic systems.

ANALYTICA CHIMICA ACTA (2021)

Article Biochemical Research Methods

Mixing enhancement in T-junction microchannel with acoustic streaming induced by triangular structure

Sintayehu Assefa Endaylalu et al.

Summary: This study utilizes acoustic streaming technology to promote the mixing of two fluids in the entrance junction region of a microchannel, significantly improving mixing efficiency.

BIOMICROFLUIDICS (2021)

Article Engineering, Environmental

Mixing intensification using sound-driven micromixer with sharp edges

Chuanyu Zhang et al.

Summary: This study investigates the performance of Sharp-Edge Acoustic Streaming (SEAS) micromixers through numerical simulation and experiments, identifying key factors affecting mixing efficiency. The shape of flow streamlines reveals the interaction between acoustic streaming and main flow, leading to enhanced mixing performance. An optimal structure among the mixers reduces micromixing time significantly, confirming the micromixing performance of SEAS mixer compared to passive mixers at low Reynolds flow.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Electrical & Electronic

Enhancement of passive mixing via arc microchannel with sharp corner structure

Long-Run Huang et al.

Summary: A novel microfluidic device utilizing sharp corner structures on the side wall of an arc microchannel was reported for efficient passive mixing, achieving a significant increase in interfacial contact area between different fluids and enhancing fluid mixing from approximately 87% to 92% at moderate Reynolds numbers. The device has great potential in various lab-chip applications, such as clinic diagnosis and analytic chemistry, due to its single-layer structure and high mixing efficiency.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2021)

Article Chemistry, Analytical

One-step enzyme kinetics measurement in 3D printed microfluidics devices based on a high-performance single vibrating sharp-tip mixer

Xiaojun Li et al.

Summary: The one-step assay using a 3D-printed microfluidic device simplifies enzyme kinetics measurement by eliminating the preparation and handling of multiple solutions. With a highly efficient vibrating mixing method, experiments with different substrate concentrations can be performed by adjusting flow rates, yielding consistent Michaelis constant values. This method offers advantages such as simplicity in fabrication and operation, rapid analysis, low power consumption, and high temporal resolution.

ANALYTICA CHIMICA ACTA (2021)

Article Engineering, Environmental

Thorough computational analysis of the staggered herringbone micromixer reveals transport mechanisms and enables mixing efficiency-based improved design

Andreas G. Hadjigeorgiou et al.

Summary: A computational study on the mixing of biomolecules in the SHM reveals the importance of numerical accuracy and thorough analysis in improving mixing efficiency and reducing mixing length. Optimization of SHM design is proposed to increase efficiency and reduce length, with the effect of designs on chaotic advection demonstrated.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Biochemical Research Methods

Optimized design of obstacle sequences for microfluidic mixing in an inertial regime

Matteo Antognoli et al.

Summary: This study optimized mixing efficiency by analyzing sequences of cylindrical obstacles in the inertial regime, predicted and optimized interfacial stretching of co-flowing fluids using a specialized software, and tested new passive mixer designs using confocal microscopy and CFD simulations, achieving mixing efficiencies around 80%.

LAB ON A CHIP (2021)

Article Biochemical Research Methods

Antibiotic susceptibility test under a linear concentration gradient using travelling surface acoustic waves

Yongtaek Im et al.

Summary: An efficient and accurate antibiotic susceptibility test is crucial for measuring the antimicrobial resistance of pathogenic bacteria. The device demonstrated in this study uses travelling surface acoustic waves to rapidly form linear antibiotic concentration gradients in a microfluidic channel. This method provides a reliable way to determine minimal inhibitory concentrations of antibiotics for different bacteria, enhancing the effectiveness of the AST.

LAB ON A CHIP (2021)

Article Biochemical Research Methods

Rapid isolation of circulating cancer associated fibroblasts by acoustic microstreaming for assessing metastatic propensity of breast cancer patients

Ruoyu Jiang et al.

Summary: This study presents a label-free and high-throughput microbubble-based acoustic microstreaming technique for isolating rare circulating cells with a high capture efficiency and preserving cell integrity within a short time frame. The microfluidic device demonstrated efficient trapping and capturing of rare cells, allowing for rapid isolation of circulating cancer associated fibroblasts (cCAFs), circulating tumor cells (CTCs), and immune cells from cancer patients' blood samples. The approach holds promise for clinical usage as a metastatic propensity assay to elucidate cancer immunological responses and the complex relationships between circulating tumor cells and their microenvironment.

LAB ON A CHIP (2021)

Article Biochemical Research Methods

Gear-shaped micromixer for synthesis of silica particles utilizing inertio-elastic flow instability

Sun Ok Hong et al.

Summary: The study discusses the challenge of mixing in microscale flows and proposes an efficient mixing scheme by combining inertio-elastic flow instability with a modified serpentine channel design. Results show that this new scheme achieves highly efficient mixing over a wider range of flow rates and is successfully applied to the continuous synthesis of silica nanoparticles, resulting in nanoparticles with more uniform size distribution.

LAB ON A CHIP (2021)

Article Nanoscience & Nanotechnology

Phase-controlled field-effect micromixing using AC electroosmosis

Paresa Modarres et al.

MICROSYSTEMS & NANOENGINEERING (2020)

Article Chemistry, Analytical

Submicron Particle Concentration and Patterning with Ultralow Frequency Acoustic Vibration

Yinning Zhou et al.

ANALYTICAL CHEMISTRY (2020)

Article Biochemical Research Methods

An ultra-rapid acoustic micromixer for synthesis of organic nanoparticles

M. Reza Rasouli et al.

LAB ON A CHIP (2019)

Article Biochemical Research Methods

Cell lysis via acoustically oscillating sharp edges

Zeyu Wang et al.

LAB ON A CHIP (2019)

Article Biochemical Research Methods

On-chip stool liquefaction via acoustofluidics

Shuaiguo Zhao et al.

LAB ON A CHIP (2019)

Article Chemistry, Analytical

Acoustofluidics-based enzymatic constant determination by rapid and stable in situ mixing

Chang Tian et al.

SENSORS AND ACTUATORS B-CHEMICAL (2018)

Article Engineering, Electrical & Electronic

Mixing high-viscosity fluids via acoustically driven bubbles

Sinem Orbay et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2017)

Article Engineering, Environmental

Microfluidic mixing using unsteady electroosmotic vortices produced by a staggered array of electrodes

Koji Matsubara et al.

CHEMICAL ENGINEERING JOURNAL (2016)

Review Engineering, Environmental

Passive mixers in microfluidic systems: A review

Chia -Yen Lee et al.

CHEMICAL ENGINEERING JOURNAL (2016)

Article Engineering, Environmental

A high-performance micromixer using three-dimensional Tesla structures for bio-applications

An-Shik Yang et al.

CHEMICAL ENGINEERING JOURNAL (2015)

Article Biochemical Research Methods

Vibrating membrane with discontinuities for rapid and efficient microfluidic mixing

Hoang Van Phan et al.

LAB ON A CHIP (2015)

Article Chemistry, Analytical

Computational fluid dynamic analysis of poly(dimethyl siloxane) magnetic actuator based micromixer

Naresh Veldurthi et al.

SENSORS AND ACTUATORS B-CHEMICAL (2015)

Article Chemistry, Analytical

Enhanced blood plasma separation by modulation of inertial lift force

Myung Gwon Lee et al.

SENSORS AND ACTUATORS B-CHEMICAL (2014)

Article Biochemical Research Methods

Tunable, pulsatile chemical gradient generation via acoustically driven oscillating bubbles

Daniel Ahmed et al.

LAB ON A CHIP (2013)

Article Biochemical Research Methods

An acoustofluidic micromixer based on oscillating sidewall sharp-edges

Po-Hsun Huang et al.

LAB ON A CHIP (2013)

Article Engineering, Environmental

Design and evaluation of an easily fabricated micromixer with three-dimensional periodic perturbation

Ying Lin et al.

CHEMICAL ENGINEERING JOURNAL (2011)

Article Biochemical Research Methods

Mixing enhancement for high viscous fluids in a microfluidic chamber

Shasha Wang et al.

LAB ON A CHIP (2011)

Article Biochemical Research Methods

Automated cellular sample preparation using a Centrifuge-on-a-Chip

Albert J. Mach et al.

LAB ON A CHIP (2011)

Article Biochemical Research Methods

Fluid mixing in planar spiral microchannels

AP Sudarsan et al.

LAB ON A CHIP (2006)

Article Multidisciplinary Sciences

Efficient mixing at low Reynolds numbers using polymer additives

A Groisman et al.

NATURE (2001)