Related references
Note: Only part of the references are listed.
Article
Chemistry, Multidisciplinary
Xinliang Li et al.
Summary: Using MXene materials as an artificial layer can induce uniform zinc deposition, leading to an extended lifespan of the zinc anode. Among different terminations, Cl termination is found to be more effective in regulating zinc ion diffusion.
Article
Chemistry, Multidisciplinary
Hongyu Lu et al.
Summary: A new strategy of using multi-component crosslinked hydrogel electrolyte is proposed to inhibit dendrite growth and enhance low temperature adaptability in rechargeable aqueous Zn-ion batteries (ZIBs).
ADVANCED FUNCTIONAL MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Halil Tetik et al.
Summary: Combining unidirectional freeze casting with inkjet-based 3D printing, macroscopic porous aerogels with vertically aligned Ti3C2Tx sheets were fabricated, demonstrating excellent electromechanical performance and electrical conductivity. By adding an inkjet-printed MXene current collector layer with horizontally aligned MXene sheets and vertical MXene sheets as electrodes, the electrochemical performance of the cells showed thickness-independent capacitive behavior.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Peng Xiao Sun et al.
Summary: In this study, a TiOx/Zn/N-doped carbon inverse opal (TZNC IO) host is developed to regulate Zn deposition and prevent side reactions. The highly ordered IO host and three-dimensional open networks enable stable Zn deposition and cycling performance at large current densities.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2022)
Article
Chemistry, Physical
Li Zeng et al.
Summary: This study presents the design of a functional 3D printed N-doped carbon host, which effectively addresses the issues in Zn-ion batteries and enables dendrite-free and reversible Zn plating/stripping.
ADVANCED ENERGY MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Dan Xie et al.
Summary: This research proposes a design strategy to electrodeposit a thin polyanthraquinone layer on the surface of zinc to achieve dendrite-free zinc metal anodes. The results show that the polyanthraquinone layer can effectively suppress dendrite growth, hydrogen evolution reaction, and zinc corrosion, improving the cycling lifespan and rate capability of zinc metal batteries.
ADVANCED FUNCTIONAL MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Min Zhang et al.
Summary: In this study, a mixed ionic-electronic conducting scaffold is introduced into Zn-P to fabricate anti-corrosive, flexible, and dendrite-free Zn anodes. The as-prepared Zn-P-based anode exhibits superior electrochemical performance, including long-life cycling stability and high rate capability in practical coin and flexible pouch cells.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Jiahui Zhou et al.
Summary: Metallic zinc is considered an attractive anode material for aqueous energy storage devices due to its low cost, high capacity, and environmentally friendly features. However, dendritic growth and severe side reactions have restricted the development of zinc-metal anodes. In this study, a thermal infusion strategy was used to create a stable composite zinc-based anode. The results showed that this new structure effectively inhibits dendritic growth and passivation, enabling long-cycling life and high capacity retention.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Physical
Jianan Gu et al.
Summary: A special liquid metal electrode was designed and fabricated to solve the uncontrollable dendrite issue in zinc anodes, and a flexible zinc-based anode was successfully prepared with high performance and long lifespan, which is of great significance for the development of next-generation zinc-based batteries.
ADVANCED ENERGY MATERIALS
(2022)
Article
Chemistry, Physical
Xiaolong Li et al.
Summary: In this study, a directional freezing assisted 3D printing strategy is proposed to construct flexible, compressible, and ultrahigh energy/power density LIBs. The use of cellulose nanofibers and carbon nanotubes in the printed electrode ensures fast electron transfer and stress release, while the vertical channels induced by directional freezing solve the ion transport limitation of flexible 3D printed electrodes. The printed LIB demonstrates record-high energy and power density, and favorable electrochemical stability in bending and compression states.
ADVANCED ENERGY MATERIALS
(2022)
Article
Chemistry, Physical
Jingxin Zhao et al.
Summary: Coaxial fiber-shaped Zn-ion hybrid supercapacitors (CFZHSCs) are promising electrochemical energy storage devices for flexible and wearable electronics with high power/energy density, long cycle life, splendid mechanical stability, and high safety. The development of a highly reversible fiber-shaped Zn anode with controlled deposition morphology significantly improves the electrochemical performance of the devices. The CFZHSCs device exhibits a larger volumetric specific capacitance and a higher volumetric energy density compared to other devices, along with excellent capacitance retention and mechanical flexibility. In addition, the integration of the CFZHSCs device with a triboelectric nanogenerator enables a self-powered textile-based monitoring system for stable temperature detection.
Article
Chemistry, Multidisciplinary
Tian Wang et al.
Summary: A rational architecture design of an artificial protective layer combined with a conductive carbon framework was used for achieving dendrite-free zinc deposition. The artificial protective layer formed a solid solution alloy with zinc-phosphorus, which successfully redistributed the concentration gradient of the electrolyte on the electrode surface. The fabricated zinc symmetrical battery exhibited dendrite-free plating/stripping for a long period of time, and the aqueous zinc//MnO2 full cell showed a reversible capacity.
Article
Chemistry, Physical
Wencheng Du et al.
Summary: Uncontrollable dendrite growth and side reactions hinder the commercial applications of Zinc ion batteries. A practical non-dendrite zinc anode was designed by combining commercial zinc powders and pristine graphene. The anode exhibited low voltage hysteresis, long cycle life, and improved rate performance and energy density.
ENERGY STORAGE MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Wei Li et al.
Summary: This study reports the use of Cu7Te4 as a low-intercalation-potential material for aqueous Zn batteries. Cu7Te4 anode shows a low plateau voltage, high capacity, and superior cyclability. By modifying Zn with a Cu7Te4 layer, a hybrid anode based on intercalation-deposition mechanism is developed to inhibit Zn dendrite. Furthermore, a rocking-chair Cu7Te4//ZnI2 Zn-ion full battery with high energy density and capacity retention is demonstrated.
ADVANCED FUNCTIONAL MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Pinji Wang et al.
Summary: Multifunctional interfacial engineering on the Zn anode, through the spontaneous construction of a carbonyl-containing layer (Zn@ZCO), effectively suppresses dendrite growth, hydrogen evolution, and sluggish kinetics associated with Zn deposition. The Zn@ZCO anode exhibits a long cycling lifespan, dendrite-free surface, and excellent rate performance in aqueous zinc-ion batteries.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Yajun Zhao et al.
Summary: This study reported a trinary layered double hydroxide with hydrogen vacancies as a new cathode material for aqueous zinc-ion batteries, showing high capacity and stable cycling performance. Experimental and theoretical studies revealed that the exposed lattice oxygen atoms due to hydrogen vacancies serve as active sites for zinc-ion storage, while the synergy of trinary transitional metal cations can suppress octahedral distortion.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Zhou Xia et al.
Summary: Wet-spinning is a promising strategy for fabricating fiber electrodes for commercial fiber batteries due to its compatibility with large-scale production. However, regulating the rheological properties of electrochemical materials for wet-spinning remains a challenge. In this study, the rheological behavior of V2O5 nanowire dispersions was controlled by introducing graphene oxide (GO) flakes, leading to the successful fabrication of wet-spun V2O5/rGO hybrid fibers with excellent performance for zinc-ion storage. These fibers were integrated into a wearable self-powered system with high overall efficiency.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Lijun Zhou et al.
Summary: This study proposes the use of zincophilic Lewis bases as electrolyte additives to stabilize Zn anodes under harsh test conditions by removing H2O from the solvated Zn2+ sheaths and limiting its activity. The combination of these factors effectively restrains water-involved side reactions and enables dendrite-free Zn deposition, even at high demand conditions.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2022)
Article
Chemistry, Physical
Muhammad Idrees et al.
Summary: This study presents a novel 3D printed electrode based on a hybrid polymer/carbon composite material to develop dendrite-free zinc-ion batteries. By controlling the surface properties and electronic features of the material, high capacity, low voltage polarization, and long lifespan of the zinc-ion batteries are achieved.
Article
Chemistry, Physical
Seongjoon So et al.
Summary: The research proposed the use of Nb2O5 film as a coating layer in aqueous rechargeable batteries, showing good performance in ensuring uniform ion flux and rapid transportation of zinc ions. The symmetric Nb2O5@Zn anode system demonstrated good stability and electrochemical performance under harsh cycling conditions.
ENERGY STORAGE MATERIALS
(2022)
Article
Chemistry, Physical
Xiaodong Zhu et al.
Summary: In this study, a tetramethylammonium-intercalated Ti3C2Tx MXene (MX-TMA) coating was constructed on the surface of zinc foil, improving the stability of zinc anodes. The experiment showed that MX-TMA can prolong the lifespan of zinc electrodes and achieve stable cycles even under deep discharge.
ENERGY STORAGE MATERIALS
(2022)
Article
Chemistry, Physical
Yujin Ren et al.
Summary: Flexible zinc-ion batteries have rapidly developed in recent years as an essential branch of flexible energy storage devices. This study successfully utilized 3D printing technology to create flexible aqueous micro-ZIBs, demonstrating their stability and potential.
Article
Chemistry, Multidisciplinary
Nannan Zhang et al.
Summary: In this study, an ultrathin and uniform MXene layer was assembled on the surface of zinc anodes using an in situ spontaneously reducing/assembling strategy. The integrated MXene layer reduced the zinc nucleation energy barrier and provided a more uniformly distributed electric field, resulting in low voltage hysteresis and excellent cycling stability with dendrite-free behaviors in zinc-ion batteries.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2021)
Article
Chemistry, Multidisciplinary
Xianzhong Yang et al.
Summary: The study successfully inhibited Zn dendrite formation and side reactions by depositing a ZnSe film on commercial Zn foil, leading to improved cyclic stability of the battery and providing feasibility for commercial applications.
ADVANCED MATERIALS
(2021)
Article
Engineering, Environmental
Penggao Liu et al.
Summary: The research successfully established a zincophile interphase based on 3D-printed g-C3N4 modulating interface, facilitating homogeneous zinc nucleation and dendrite-free growth for highly reversible Zn plating/stripping. The novel strategy showed lower energy barrier and more homogeneously charge distribution, leading to superior cycling stability in Zn metal batteries.
CHEMICAL ENGINEERING JOURNAL
(2021)
Article
Chemistry, Multidisciplinary
Minfeng Chen et al.
Summary: A all-round hydrogel electrolyte was developed using cotton, tetraethyl orthosilicate, and glycerol, exhibiting high ionic conductivity and excellent mechanical properties.
ADVANCED MATERIALS
(2021)
Article
Chemistry, Physical
Yanjun Zhang et al.
Summary: Vanadium hexacyanoferrate (VHCF) shows promising performance as a cathode material for aqueous rechargeable Zn-ion batteries, with high capacity, long cycle life, and excellent Coulombic efficiency.
JOURNAL OF POWER SOURCES
(2021)
Article
Chemistry, Physical
Qing Li et al.
Summary: The study highlights the practical issues that may arise when using Zn foil for studying the stability and dendrite formation behavior of Zn anodes, suggesting that a Zn powder/current collector configuration is more practical. The research also reveals that during the aging process of the Zn-P@Cu electrode, hydrogen forms on the surface of Cu and the Zn-P dissolves, leading to morphological changes, which are attributed to galvanic corrosion between Cu and Zn.
ADVANCED ENERGY MATERIALS
(2021)
Article
Chemistry, Physical
Zhaoxi Shen et al.
Summary: In this study, the stability of aqueous fibrous zinc metal batteries (AFZMB) was enhanced by fabricating an innovative stratified deposition framework (SDF) anode, which improved cycling life and greatly reduced dendrite puncture. The SDF/AFZMB showed a long cycling life of 2000 cycles with 89.0% capacity retention at 5C, demonstrating potential for future wearable electronics applications.
ADVANCED ENERGY MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Miao Zhou et al.
Summary: This study investigates a novel zinc anode with a surface-preferred (002) crystal plane, revealing its characteristics of fewer dendrites, no by-products, and weak hydrogen evolution. This leads to improved stability and reversibility of the battery system.
ADVANCED MATERIALS
(2021)
Article
Chemistry, Physical
Jian Wu et al.
Summary: This study introduces spinel Zn3V3O8 as a high-capacity zinc supplied cathode in vanadium family for AZIBs, achieving a discharge capacity of 285 mA.h g(-1) and excellent capacity retention. Additionally, a novel Zn-metal free AZIBs using Zn3V3O8 parallel to carbon paper battery has been designed, aiming to promote the practical application of rechargeable AZIBs.
ENERGY STORAGE MATERIALS
(2021)
Article
Chemistry, Physical
Chaozheng Liu et al.
Summary: The study introduces a chemically self-charging flexible solid-state zinc ion battery with high power density and energy density. Utilizing a VO2 cathode and PAM-ChNF electrolyte, the battery achieves self-charging through a redox reaction at ambient conditions. It offers superior electrochemical performance and self-rechargeability.
ADVANCED ENERGY MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Xinliang Li et al.
Summary: The study focuses on utilizing Ti(3)C(2)Tx MXene as a redistributor for zinc powder anodes, constructing a stable and highly reversible zinc powder anode to address dendrite growth and polarization issues, improving the cycle life and rate capability of zinc-based full batteries.
Article
Chemistry, Multidisciplinary
Qinghe Cao et al.
Summary: The proposed 3D nitrogen-doped vertical graphene nanosheets grown on carbon cloth improve the performance of zinc-ion batteries by achieving uniform zinc nucleation, optimizing electric distribution, and enhancing the zinc deposition/stripping process, leading to higher electrochemical performance. This technology not only achieves high cycling stability of the battery, but also exhibits outstanding mechanical flexibility, showing great potential for portable and wearable electronics.
ADVANCED FUNCTIONAL MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Hui Ma et al.
Summary: Developing high-loading cathodes with superior electrochemical performance in aqueous zinc-ion batteries is desirable but challenging. Advanced 3D printing of composite cathodes with unique structures enables high specific capacity and outstanding cycling stability, paving the way for designing state-of-the-art cathodes for ZIBs.
Article
Chemistry, Physical
Wenjun Deng et al.
Summary: This study reports a K2MnFe(CN)6 cathode achieving a very stable capacity in a ZIB, attributed to its gradual transformation to a more stable K2Zn3[Fe(CN)6](2) phase induced by Zn2+ insertion. The mechanism involves lattice distortion and formation of wider channels for highly stable storage and release of zinc ions, providing new insights into the evolution of PBAs in ZIBs.
ADVANCED ENERGY MATERIALS
(2021)
Article
Chemistry, Physical
Zhaoxi Shen et al.
Summary: The study proposes a new idea for achieving preferred two-electron redox reactions through the precise proton redistribution in the hydrogel electrolyte, demonstrating key roles of MnO2/Mn2+ two-electron redox and anode protection in battery performance. Such batteries show specific capacities and high retention rates without additional Mn2+ in the electrolyte, as well as potential for wearable electronics.
ADVANCED ENERGY MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Yunzhao Wu et al.
ADVANCED FUNCTIONAL MATERIALS
(2020)
Article
Chemistry, Multidisciplinary
Yun Tang et al.
ADVANCED FUNCTIONAL MATERIALS
(2020)
Article
Chemistry, Multidisciplinary
Chao Li et al.
ADVANCED MATERIALS
(2020)
Article
Chemistry, Physical
Yang Dong et al.
JOURNAL OF MATERIALS CHEMISTRY A
(2020)
Article
Chemistry, Physical
Ping Hu et al.
Article
Chemistry, Multidisciplinary
Qi Yang et al.
ADVANCED MATERIALS
(2019)
Article
Chemistry, Multidisciplinary
Yinxiang Zeng et al.
ADVANCED MATERIALS
(2019)
Article
Chemistry, Multidisciplinary
Yuan Tian et al.
Article
Multidisciplinary Sciences
Kwan Woo Nam et al.
NATURE COMMUNICATIONS
(2019)
Article
Chemistry, Physical
Longtao Ma et al.
ADVANCED ENERGY MATERIALS
(2019)
Article
Materials Science, Multidisciplinary
Hagen Soengen et al.
Article
Chemistry, Physical
Tianpeng Jiao et al.
JOURNAL OF MATERIALS CHEMISTRY A
(2019)
Article
Chemistry, Physical
Yangsheng Cai et al.
ENERGY STORAGE MATERIALS
(2018)
Article
Chemistry, Physical
Munseok S. Chae et al.
JOURNAL OF POWER SOURCES
(2017)
Article
Chemistry, Physical
Viktor Renman et al.
JOURNAL OF POWER SOURCES
(2017)
Article
Chemistry, Physical
Ke Lu et al.
JOURNAL OF MATERIALS CHEMISTRY A
(2017)
Article
Chemistry, Multidisciplinary
James O. Hardin et al.
ADVANCED MATERIALS
(2015)
Article
Physics, Multidisciplinary
T. Bjorkman et al.
PHYSICAL REVIEW LETTERS
(2012)
