Related references
Note: Only part of the references are listed.Fabrication of Stretchable Superamphiphobic Surfaces with Deformation-Induced Rearrangeable Structures
Xiaoteng Zhou et al.
ADVANCED MATERIALS (2022)
Enhanced Surface Icephobicity on an Elastic Substrate
Zhiwei He et al.
LANGMUIR (2022)
Two-Photon Laser Microprinting of Highly Ordered Nanoporous Materials Based on Hexagonal Columnar Liquid Crystals
Joeel Monti et al.
ACS APPLIED MATERIALS & INTERFACES (2022)
A Breathable Knitted Fabric-Based Smart System with Enhanced Superhydrophobicity for Drowning Alarming
Tianxue Zhu et al.
ACS NANO (2022)
Scalable Robust Superamphiphobic Coatings Enabled by Self-Similar Structure, Protective Micro-Skeleton, and Adhesive for Practical Anti-Icing of High-Voltage Transmission Tower
Jinfei Wei et al.
ADVANCED FUNCTIONAL MATERIALS (2022)
Light-sheet 3D microprinting via two-colour two-step absorption
Vincent Hahn et al.
NATURE PHOTONICS (2022)
Superhydrophobic Materials: Versatility and Translational Applications
Haiyang Yong et al.
ADVANCED MATERIALS INTERFACES (2022)
3D Printing of Superhydrophobic Objects with Bulk Nanostructure
Zheqin Dong et al.
ADVANCED MATERIALS (2021)
3D Printed Flexible Strain Sensors: From Printing to Devices and Signals
Haodong Liu et al.
ADVANCED MATERIALS (2021)
Advances in micro milling: From tool fabrication to process outcomes
Ni Chen et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2021)
Ultra-Short Pulse Lasers for Microfabrication: A Review
Gediminas Raciukaitis
IEEE JOURNAL OF SELECTED TOPICS IN QUANTUM ELECTRONICS (2021)
3D printing of inherently nanoporous polymers via polymerization-induced phase separation
Zheqin Dong et al.
NATURE COMMUNICATIONS (2021)
Two-step absorption instead of two-photon absorption in 3D nanoprinting
Vincent Hahn et al.
NATURE PHOTONICS (2021)
Rapid, continuous projection multi-photon 3D printing enabled by spatiotemporal focusing of femtosecond pulses
Paul Somers et al.
LIGHT-SCIENCE & APPLICATIONS (2021)
Superhydrophobic materials used for anti-icing Theory, application, and development
Hua He et al.
ISCIENCE (2021)
Biotemplated Fabrication of a Multifunctional Superwettable Shape Memory Film for Wearable Sensing Electronics and Smart Liquid Droplet Manipulation
Lili Ma et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
3D Printing of Elastomeric Bioinspired Complex Adhesive Microstructures
Cem Balda Dayan et al.
ADVANCED MATERIALS (2021)
Super liquid repellent surfaces for anti-foaming and froth management
William S. Y. Wong et al.
NATURE COMMUNICATIONS (2021)
Recent Advances in Reactive Ion Etching and Applications of High-Aspect-Ratio Microfabrication
Michael Huff
MICROMACHINES (2021)
Robust liquid repellency by stepwise wetting resistance
Jing Sun et al.
APPLIED PHYSICS REVIEWS (2021)
Durable Super-repellent Surfaces: From Solid-Liquid Interaction to Applications
Fanfei Yu et al.
ACCOUNTS OF MATERIALS RESEARCH (2021)
Review on the recent development of durable superhydrophobic materials for practical applications
Qinghong Zeng et al.
NANOSCALE (2021)
Emerging open microfluidics for cell manipulation
Qiang Zhang et al.
CHEMICAL SOCIETY REVIEWS (2021)
Four-dimensional direct laser writing of reconfigurable compound micromachines
Dongdong Jin et al.
MATERIALS TODAY (2020)
Three-dimensional printing of multicomponent glasses using phase-separating resins
David G. Moore et al.
NATURE MATERIALS (2020)
From Simple to Architecturally Complex Hydrogel Scaffolds for Cell and Tissue Engineering Applications: Opportunities Presented by Two-Photon Polymerization
Jiaxi Song et al.
ADVANCED HEALTHCARE MATERIALS (2020)
Self-Compensating Liquid-Repellent Surfaces with Stratified Morphology
Songtao Hu et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
4D Printing at the Microscale
Christoph A. Spiegel et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Rapid Assembly of Small Materials Building Blocks (Voxels) into Large Functional 3D Metamaterials
Vincent Hahn et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Evidencing the nonlinearity independence of resolution in femtosecond laser ablation
M. Garcia-Lechuga et al.
OPTICS LETTERS (2020)
Liquid-Superrepellent Bioinspired Fibrillar Adhesives
Ville Liimatainen et al.
ADVANCED MATERIALS (2020)
Metal 3D printing as a disruptive technology for superalloys
Chinnapat Panwisawas et al.
NATURE COMMUNICATIONS (2020)
Highly efficient electrosynthesis of hydrogen peroxide on a superhydrophobic three-phase interface by natural air diffusion
Qizhan Zhang et al.
NATURE COMMUNICATIONS (2020)
Biomimetic Coating-free Superomniphobicity
Ratul Das et al.
SCIENTIFIC REPORTS (2020)
3D Printing of Bioinspired Biomaterials for Tissue Regeneration
Tian Li et al.
ADVANCED HEALTHCARE MATERIALS (2020)
Superhydrophobic Coatings from Ecofriendly Materials and Processes: A Review
Ilker S. Bayer
ADVANCED MATERIALS INTERFACES (2020)
Mitigating cavitation erosion using biomimetic gas-entrapping microtextured surfaces (GEMS)
Silvestre Roberto Gonzalez-Avila et al.
SCIENCE ADVANCES (2020)
3D Two-Photon Microprinting of Nanoporous Architectures
Frederik Mayer et al.
ADVANCED MATERIALS (2020)
Liquid repellency enhancement through flexible microstructures
Songtao Hu et al.
SCIENCE ADVANCES (2020)
3D Printing of Ordered Mesoporous Silica Complex Structures
Efrat Shukrun Farrell et al.
NANO LETTERS (2020)
Design of robust superhydrophobic surfaces
Dehui Wang et al.
NATURE (2020)
3D Bioinspired Microstructures for Switchable Repellency in both Air and Liquid
Xiaojiang Liu et al.
ADVANCED SCIENCE (2020)
Projection micro stereolithography based 3D printing and its applications
Qi Ge et al.
INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING (2020)
Superhydrophobic Coatings as Anti-Icing Systems for Small Aircraft
Filomena Piscitelli et al.
AEROSPACE (2020)
Paper Microfluidics for Point-of-Care Blood-Based Analysis and Diagnostics
Hua Li et al.
ANALYTICAL CHEMISTRY (2019)
Nanofabrication of High-Resolution Periodic Structures with a Gap Size Below 100 nm by Two-Photon Polymerization
Lei Zheng et al.
NANOSCALE RESEARCH LETTERS (2019)
Multi-metal electrohydrodynamic redox 3D printing at the submicron scale
Alain Reiser et al.
NATURE COMMUNICATIONS (2019)
Open Microfluidic Capillary Systems
Erwin Berthier et al.
ANALYTICAL CHEMISTRY (2019)
Icephobic materials: Fundamentals, performance evaluation, and applications
Yizhou Shen et al.
PROGRESS IN MATERIALS SCIENCE (2019)
Programmable Liquid Adhesion on Bio-Inspired Re-Entrant Structures
Xiaojiang Liu et al.
SMALL (2019)
Multifunctional Magnetocontrollable Superwettable-Microcilia Surface for Directional Droplet Manipulation
Shuang Ben et al.
ADVANCED SCIENCE (2019)
Multifaceted design optimization for superomniphobic surfaces
J. R. Panter et al.
SCIENCE ADVANCES (2019)
Functional Materials for Two-Photon Polymerization in Microfabrication
Marco Carlotti et al.
SMALL (2019)
Scalable submicrometer additive manufacturing
Sourabh K. Saha et al.
SCIENCE (2019)
How to Coat the Inside of Narrow and Long Tubes with a Super-Liquid-Repellent Layer-A Promising Candidate for Antibacterial Catheters
Florian Geyer et al.
ADVANCED MATERIALS (2019)
Hierarchical Structures for Superhydrophobic and Superoleophobic Surfaces
Hannu Teisala et al.
LANGMUIR (2019)
Controlling the shape of 3D microstructures by temperature and light
Marc Hippler et al.
NATURE COMMUNICATIONS (2019)
Separation Mechanism and Construction of Surfaces with Special Wettability for Oil/Water Separation
Chaolang Chen et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
3D Printing of Bioinspired Liquid Superrepellent Structures
Xiaojiang Liu et al.
ADVANCED MATERIALS (2018)
Superhydrophobic Blood-Repellent Surfaces
Ville Jokinen et al.
ADVANCED MATERIALS (2018)
Characterization of superhydrophobic surfaces for drag reduction in turbulent flow
James W. Gose et al.
JOURNAL OF FLUID MECHANICS (2018)
Polymeric materials with switchable superwettability for controllable oil/water separation: A comprehensive review
Jin-Jin Li et al.
PROGRESS IN POLYMER SCIENCE (2018)
Microstructures Fabricated by Two-Photon Polymerization and Their Remote Manipulation Techniques: Toward 3D Printing of Micromachines
Yang Lin et al.
ADVANCED OPTICAL MATERIALS (2018)
3D printing of soft robotic systems
T. J. Wallin et al.
NATURE REVIEWS MATERIALS (2018)
Superoleophobic Slippery Lubricant-Infused Surfaces: Combining Two Extremes in the Same Surface
Zheqin Dong et al.
ADVANCED MATERIALS (2018)
Biomimetic coating-free surfaces for long-term entrapment of air under wetting liquids
Eddy M. Domingues et al.
NATURE COMMUNICATIONS (2018)
Pattern generation for direct-write three-dimensional nanoscale structures via focused electron beam induced deposition
Lukas Keller et al.
BEILSTEIN JOURNAL OF NANOTECHNOLOGY (2018)
Coatings super-repellent to ultralow surface tension liquids
Shuaijun Pan et al.
NATURE MATERIALS (2018)
High-Fidelity 3D-Nanoprinting via Focused Electron Beams: Computer-Aided Design (3BID)
Jason D. Fowlkes et al.
ACS APPLIED NANO MATERIALS (2018)
Imparting Icephobicity with Substrate Flexibility
Thomas Vasileiou et al.
LANGMUIR (2017)
Oleoplaning droplets on lubricated surfaces
Dan Daniel et al.
NATURE PHYSICS (2017)
Mapping microscale wetting variations on biological and synthetic water-repellent surfaces
Ville Liimatainen et al.
NATURE COMMUNICATIONS (2017)
The use of femtosecond laser ablation as a novel tool for rapid micro-mechanical sample preparation
Manuel J. Pfeifenberger et al.
MATERIALS & DESIGN (2017)
Nature-inspired superwettability systems
Mingjie Liu et al.
NATURE REVIEWS MATERIALS (2017)
Doubly Reentrant Cavities Prevent Catastrophic Wetting Transitions on Intrinsically Wetting Surfaces
Eddy M. Domingues et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Electrohydrodynamic NanoDrip Printing of High Aspect Ratio Metal Grid Transparent Electrodes
Julian Schneider et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
Degradable Magnetic Composites for Minimally Invasive Interventions: Device Fabrication, Targeted Drug Delivery, and Cytotoxicity Tests
Christian Peters et al.
ADVANCED MATERIALS (2016)
Superhydrophobic materials for biomedical applications
Eric J. Falde et al.
BIOMATERIALS (2016)
The springtail cuticle as a blueprint for omniphobic surfaces
Rene Hensel et al.
CHEMICAL SOCIETY REVIEWS (2016)
Superhydrophobicity enhancement through substrate flexibility
Thomas Vasileiou et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)
Moving superhydrophobic surfaces toward real-world applications
Xuelin Tian et al.
SCIENCE (2016)
Water droplet impact on elastic superhydrophobic surfaces
Patricia B. Weisensee et al.
SCIENTIFIC REPORTS (2016)
Light-Fueled Microscopic Walkers
Hao Zeng et al.
ADVANCED MATERIALS (2015)
Super liquid-repellent layers: The smaller the better
Hans-Juergen Butt et al.
ADVANCES IN COLLOID AND INTERFACE SCIENCE (2015)
Bioinspired Surfaces with Superwettability: New Insight on Theory, Design, and Applications
Shutao Wang et al.
CHEMICAL REVIEWS (2015)
Two-photon polymerization microfabrication of hydrogels: an advanced 3D printing technology for tissue engineering and drug delivery
Jin-Feng Xing et al.
CHEMICAL SOCIETY REVIEWS (2015)
Micromilling: a method for ultra-rapid prototyping of plastic microfluidic devices
David J. Guckenberger et al.
LAB ON A CHIP (2015)
Programmable self-assembly
Ludovico Cademartiri et al.
NATURE MATERIALS (2015)
Robust self-cleaning surfaces that function when exposed to either air or oil
Yao Lu et al.
SCIENCE (2015)
Biologically Inspired Mushroom-Shaped Adhesive Microstructures
Lars Heepe et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 44 (2014)
Turning a surface superrepellent even to completely wetting liquids
Tingyi Leo Liu et al.
SCIENCE (2014)
Wetting Resistance at Its Topographical Limit: The Benefit of Mushroom and Serif T Structures
Rene Hensel et al.
LANGMUIR (2013)
Bio-inspired superoleophobic and smart materials: Design, fabrication, and application
Kesong Liu et al.
PROGRESS IN MATERIALS SCIENCE (2013)
Three-dimensional deep sub-diffraction optical beam lithography with 9 nm feature size
Zongsong Gan et al.
NATURE COMMUNICATIONS (2013)
Superoleophobic surfaces: design criteria and recent studies
Arun K. Kota et al.
SURFACE INNOVATIONS (2013)
State of the Art on Micromilling of Materials, a Review
M.A. Câmara et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2012)
Candle Soot as a Template for a Transparent Robust Superamphiphobic Coating
Xu Deng et al.
SCIENCE (2012)
Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity
Tak-Sing Wong et al.
NATURE (2011)
Contact angle hysteresis origins: Investigation on super-omniphobic surfaces
Renaud Dufour et al.
SOFT MATTER (2011)
Wetting Invasion and Retreat across a Corner Boundary
Feng-Ming Chang et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2010)
Extremely high aspect ratio GaAs and GaAs/AlGaAs nanowaveguides fabricated using chlorine ICP etching with N2-promoted passivation
Maite Volatier et al.
NANOTECHNOLOGY (2010)
Conformal switchable superhydrophobic/hydrophilic surfaces for microscale flow control
Anindarupa Chunder et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2009)
A modified Cassie-Baxter relationship to explain contact angle hysteresis and anisotropy on non-wetting textured surfaces
Wonjae Choi et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2009)
Fabrication of artificial Lotus leaves and significance of hierarchical structure for superhydrophobicity and low adhesion
Kerstin Koch et al.
SOFT MATTER (2009)
Wetting of silicon nanograss:: From superhydrophilic to superhydrophobic surfaces
Christian Dorrer et al.
ADVANCED MATERIALS (2008)
Hierarchical structures for natural superhydrophobic surfaces
W. Li et al.
SOFT MATTER (2008)
Designing superoleophobic surfaces
Anish Tuteja et al.
SCIENCE (2007)
What do we need for a superhydrophobic surface? A review on the recent progress in the preparation of superhydrophobic surfaces
Xue-Mei Li et al.
CHEMICAL SOCIETY REVIEWS (2007)
What do we need for a superhydrophobic surface? A review on the recent progress in the preparation of superhydrophobic surfaces
Xue-Mei Li et al.
CHEMICAL SOCIETY REVIEWS (2007)
Projection micro-stereolithography using digital micro-mirror dynamic mask
C Sun et al.
SENSORS AND ACTUATORS A-PHYSICAL (2005)
Femtosecond laser microfabrication of periodic structures using a microlens array
S Matsuo et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2005)
Applications of LIGA technology to precision manufacturing of high-aspect-ratio micro-components and -systems: a review
CK Malek et al.
MICROELECTRONICS JOURNAL (2004)
Microfabrication: LIGA-X and applications
RK Kupka et al.
APPLIED SURFACE SCIENCE (2000)