☆ 4.8 Article

High Thermoelectric Performance in Earth-Abundant Cu3SbS4 by Promoting Doping Efficiency via Rational Vacancy Design

ADVANCED FUNCTIONAL MATERIALS (2023)

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

A Flash Vacuum-Induced Reaction in Preparing High Performance Thermoelectric Cu2S

Yimeng Yu et al.

Summary: The vacuum-induced method provides a fast, reliable, low-cost, and environmentally friendly approach to synthesize Cu2S-based materials with high thermoelectric performance.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection
Article Chemistry, Multidisciplinary

Unconventional Doping Effect Leads to Ultrahigh Average Thermoelectric Power Factor in Cu3SbSe4-Based Composites

Yuling Huang et al.

Summary: Conventional doping methods for thermoelectric materials are limited and may lead to deteriorated electrical performance. This study proposes an unconventional doping strategy that stabilizes cation vacancies to increase hole concentration, resulting in a significant improvement in the average power factor.

ADVANCED MATERIALS (2022)

Add to Collection
Article Engineering, Chemical

Enhanced thermoelectric performance of CuAlS2 by adding multi-walled carbon nanotubes

Maryam Shojaei et al.

Summary: This study reports the first-ever investigation of the uniform dispersion of multi-walled carbon nanotubes (MWCNTs) in CuAlS2 nanoparticles and the study of their thermoelectric properties. The results show that the addition of carbon nanotubes improves electrical conductivity and Seebeck coefficient, reduces lattice thermal conductivity, and enhances the figure-of-merit of the nanocomposites.

ADVANCED POWDER TECHNOLOGY (2022)

Add to Collection
Article Chemistry, Multidisciplinary

Realizing Enhanced Thermoelectric Performance and Hardness in Icosahedral Cu5FeS4-xSex with High-Density Twin Boundaries

Huan Wang et al.

Summary: In this study, Bornite (Cu5FeS4) was enhanced in thermoelectric performance through twin engineering and Se alloying. Alloying Se increased carrier concentration and reduced lattice thermal conductivity, improving the power factor of the material. Additionally, the retention of twin boundaries in the material led to improved hardness in samples.

SMALL (2022)

Add to Collection
Article Materials Science, Multidisciplinary

Achieving high average power factor in tetrahedrite Cu12Sb4S13 via regulating electron-phonon coupling strength

Yanci Yan et al.

Summary: In this study, the competition mechanism between lattice anharmonicity and carrier mobility is experimentally elucidated by analyzing electrical transport and local chemical bonding environment. It is found that substituting Sb with Sn effectively suppresses the anharmonicity and enhances the power factor of thermoelectric materials.

MATERIALS TODAY PHYSICS (2022)

Add to Collection
Article Chemistry, Physical

Tin-Substituted Chalcopyrite: An n-Type Sulfide with Enhanced Thermoelectric Performance

Sahil Tippireddy et al.

Summary: Substitution was used to enhance the thermoelectric performance of chalcopyrite, leading to an improved power factor and reduced lattice thermal conductivity. The substituted materials showed high Seebeck coefficient, high electrical conductivity, and a 3-fold increase in power factor. This study provides a mechanism for scattering phonons and achieving a higher figure-of-merit.

CHEMISTRY OF MATERIALS (2022)

Add to Collection
Article Chemistry, Multidisciplinary

Realizing high thermoelectric performance in non-nanostructured n-type PbTe

Baohai Jia et al.

Summary: Controlling vacancies in thermoelectric materials improves performance and stability.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Add to Collection
Article Chemistry, Physical

Long-Range Cationic Order Collapse Triggered by S/Cl Mixed-Anion Occupancy Yields Enhanced Thermoelectric Properties in Cu5Sn2S7

Gabin Guelou et al.

Summary: The study found that Cl doping induces changes in the crystal structure of Cu5Sn2S7 compounds, ultimately improving thermoelectric performance by reducing contributions to thermal conductivity from both electrons and lattice, leading to a higher ZT value at high temperatures.

CHEMISTRY OF MATERIALS (2021)

Add to Collection
Article Chemistry, Physical

Thermoelectric cooling materials

Jun Mao et al.

Summary: Solid-state thermoelectric devices can convert electricity into cooling through the Peltier effect. Commercialization of thermoelectric cooling technology has been based on Bi2Te3 alloys, but with the discovery of more promising materials, there is potential for reshaping the field. This review discusses the current status and future outlook of thermoelectric cooling materials.

NATURE MATERIALS (2021)

Add to Collection
Article Chemistry, Inorganic & Nuclear

Local-Disorder-Induced Low Thermal Conductivity in Degenerate Semiconductor Cu22Sn10S32

Ventrapati Pavan Kumar et al.

Summary: The discovery of the semiordered cubic sphalerite derivative Cu22Sn10S32 further enhances the understanding of the structure-property relationships in the Cu-Sn-S system, demonstrating the potential for lowering thermal conductivity and increasing the thermoelectric figure of merit through localized disorder.

INORGANIC CHEMISTRY (2021)

Add to Collection
Article Multidisciplinary Sciences

Enhanced atomic ordering leads to high thermoelectric performance in AgSbTe2

Subhajit Roychowdhury et al.

Summary: By optimizing atomic disorder and cadmium doping in polycrystalline silver antimony telluride, high thermoelectric performance with near room-temperature figure of merit ZT of around 1.5 and maximum ZT of around 2.6 at 573 kelvin is achieved. This strategy of enhancing cationic ordering while reducing lattice thermal conductivity is applicable to most thermoelectric materials with inherent atomic disorder.

SCIENCE (2021)

Add to Collection
Article Chemistry, Physical

Key Role of d0 and d10 Cations for the Design of Semiconducting Colusites: Large Thermoelectric ZT in Cu26Ti2Sb6S32 Compounds

Takashi Hagiwara et al.

Summary: A new member of colusite, Cu26Ti2Sb6S32, was designed in this study by incorporating Ti4+ and Sb5+ cations into the structure, leading to improved thermoelectric performance, providing new possibilities for energy conversion and optoelectronic applications.

CHEMISTRY OF MATERIALS (2021)

Add to Collection
Article Materials Science, Multidisciplinary

Enhanced thermoelectric performance in polymorphic heavily Co-doped Cu2SnS3 through carrier compensation by Sb substitution

Yaqing Zhao et al.

Summary: By doping Sb at the Sn site in Cu2Sn0.8Co0.2S3, the Seebeck coefficient can be effectively enhanced, the electronic thermal conductivity reduced, and a peak ZT of approximately 0.88 at 773 K achieved.

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Contrasting Cu Roles Lead to High Ranged Thermoelectric Performance of PbS

Yongxin Qin et al.

Summary: By introducing Cu with different roles into p-type PbS, this study effectively reduces lattice thermal conductivity and optimizes electrical transport properties. Experimental results show that Cu substitutions and interstitials can improve carrier mobility and shift the peak power factor to lower temperatures, leading to record-high ZT values. The special dynamic-doping behaviors of Cu continuously promote carrier concentration towards a temperature-dependent relationship, resulting in an eminent average power factor among the tested temperature range.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Thermoelectric Cu12Sb4S13-Based Synthetic Minerals with a Sublimation-Derived Porous Network

Haihua Hu et al.

Summary: The introduction of pore networks through BiI3 sublimation technique significantly enhanced the zT value of tetrahedrite-based thermoelectric materials, with a substantial reduction in thermal conductivity and an unexpected improvement in electrical conductivity. This work demonstrates an effective strategy to concurrently modulate both electrical and thermal properties in the synthesis of high-performance porous thermoelectric materials.

ADVANCED MATERIALS (2021)

Add to Collection
Article Chemistry, Inorganic & Nuclear

Remarkable Improvement of Thermoelectric Performance in Ga and Te Cointroduced Cu3SnS4

Song He et al.

Summary: The introduction of Ga and Te into Cu3SnS4 results in a high figure of merit (ZT) of approximately 0.96, which is 3.6 times higher than the pristine CTS. By optimizing the electronic and thermal transport properties, the thermoelectric performance of the material has been greatly improved.

INORGANIC CHEMISTRY (2021)

Add to Collection
Article Chemistry, Physical

Polycrystalline SnSe with a thermoelectric figure of merit greater than the single crystal

Chongjian Zhou et al.

Summary: The research found that by controlling the purity of tin reagents and removing tin oxide impurities, the thermal conductivity of SnSe polycrystalline samples can be reduced, resulting in excellent performance with ZT of 3.1 at 783 K.

NATURE MATERIALS (2021)

Add to Collection
Article Chemistry, Physical

Melt-spun Sn1-x-ySbxMnyTe with unique multiscale microstructures approaching exceptional average thermoelectric zT

Xiangmei Yan et al.

Summary: This study reports significantly improved thermoelectric performance in Sb, Mn-codoped SnTe synthesized by energy-efficient melt spinning, achieving peak zT values that are 110% and 340% higher than those of SnTe. The enhancement in performance is attributed to intensified phonon scattering and valence band convergence, demonstrating the effectiveness of microstructure and band structure engineering in improving thermoelectric properties.

NANO ENERGY (2021)

Add to Collection
Article Chemistry, Physical

Remarkable thermoelectric property enhancement in Cu2SnS3-CuCo2S4 nanocomposites via 3D modulation doping

Yan Gu et al.

Summary: This study reports a remarkable enhancement in thermoelectric properties of a Cu2SnS3-based nanocomposite material by incorporating CuCo2S4, achieving high power factor and suppressed lattice thermal conductivity. The hetero-structure shows significant improvement in carrier concentration and maintenance of high carrier mobility, contributing to an increased ZT value at 773K.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection
Article Nanoscience & Nanotechnology

Bi and Sn Co-doping Enhanced Thermoelectric Properties of Cu3SbS4 Materials with Excellent Thermal Stability

Manjie Shen et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Band Sharpening and Band Alignment Enable High Quality Factor to Enhance Thermoelectric Performance in n-Type PbS

Yu Xiao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Enargite Cu3PS4: A Cu-S-Based Thermoelectric Material with a Wurtzite-Derivative Structure

Takuya Tanimoto et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Weighted Mobility

G. Jeffrey Snyder et al.

ADVANCED MATERIALS (2020)

Add to Collection
Article Nanoscience & Nanotechnology

Synergistic optimization of thermoelectric performance in earth-abundant Cu2ZnSnS4by inclusion of graphene nanosheets

Sarita Devi Sharma et al.

NANOTECHNOLOGY (2020)

Add to Collection
Article Materials Science, Multidisciplinary

Excessive iodine addition leads to room-temperature superionic Cu2S with enhanced thermoelectric properties and improved thermal stability

S. Zhao et al.

MATERIALS TODAY PHYSICS (2020)

Add to Collection
Article Chemistry, Physical

High thermoelectric figure of merit ZT > 1 in SnS polycrystals

Asfandiyar et al.

JOURNAL OF MATERIOMICS (2020)

Add to Collection
Article Multidisciplinary Sciences

Complex electronic structure and compositing effect in high performance thermoelectric BiCuSeO

Guang-Kun Ren et al.

NATURE COMMUNICATIONS (2019)

Add to Collection
Article Multidisciplinary Sciences

Understanding the asymmetrical thermoelectric performance for discovering promising thermoelectric materials

Hangtian Zhu et al.

SCIENCE ADVANCES (2019)

Add to Collection
Article Nanoscience & Nanotechnology

High Thermoelectric Performance of Bi0.46Sb1.54Te3-SnTe: Synergistic Modulation of Electrical and Thermal Transport by the Introduction of Thermoelectric Hetero Nano Region

De Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection
Article Multidisciplinary Sciences

High thermoelectric performance in low-cost SnS0.91Se0.09 crystals

Wenke He et al.

SCIENCE (2019)

Add to Collection
Article Chemistry, Physical

Enhanced thermoelectric performance of BiSbTe alloy: Energy filtering effect of nanoprecipitates and the effect of SiC nanoparticles

De Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection
Article Chemistry, Physical

High Power Factors of Thermoelectric Colusites Cu26T2Ge6S32 (T = Cr, Mo, W): Toward Functionalization of the Conductive Cu-S Network

Ventrapati Pavan Kumar et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Integration of multi-scale defects for optimizing thermoelectric properties of n-type Cu1-xCdxFeS2 (x=0-0.1)

Bangzhi Ge et al.

NANOSCALE (2019)

Add to Collection
Article Materials Science, Multidisciplinary

Crystal structure and improved thermoelectric performance of iron stabilized cubic Cu3SbS3 compound

Baoli Du et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Deep defect level engineering: a strategy of optimizing the carrier concentration for high thermoelectric performance

Qian Zhang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection
Article Chemistry, Physical

Tuning the thermoelectric properties by manipulating copper in Cu2SnSe3 system

Shyam K. Prasad et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection
Article Chemistry, Physical

Enhanced thermoelectric performance of Cu3SbS4 flower-like hierarchical architectures composed of Cl doped nanoflakes via an in situ generated CuS template

Qun Wang et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2018)

Add to Collection
Article Materials Science, Ceramics

Effect of the Cu vacancy on the thermoelectric performance of p-type Cu1-xInTe2 compounds

Zengzilu Xia et al.

CERAMICS INTERNATIONAL (2017)

Add to Collection
Article Chemistry, Physical

Study on the synthesis and formation mechanism of flower-like Cu3SbS4 particles via microwave irradiation

Guilin Chen et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection
Article Chemistry, Physical

Theory-Guided Synthesis of an Eco-Friendly and Low-Cost Copper Based Sulfide Thermoelectric Material

Kan Chen et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2016)

Add to Collection
Article Chemistry, Physical

Theoretical study of defects Cu3SbSe4: Search for optimum dopants for enhancing thermoelectric properties

Dat T. Do et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Add to Collection
Article Engineering, Electrical & Electronic

Power Generation Evaluated on a Bismuth Telluride Unicouple Module

Xiaokai Hu et al.

JOURNAL OF ELECTRONIC MATERIALS (2015)

Add to Collection
Article Chemistry, Multidisciplinary

Phase diagram of In-Co-Sb system and thermoelectric properties of In-containing skutterudites

Yinglu Tang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection
Article Engineering, Electrical & Electronic

Enhanced Thermoelectric Performance of Nonstoichiometric Compounds Cu3-x SbSe4 by Cu Deficiencies

Tian-Ran Wei et al.

JOURNAL OF ELECTRONIC MATERIALS (2014)

Add to Collection
Article Engineering, Electrical & Electronic

Improvement in Thermoelectric Properties of Se-Free Cu3SbS4 Compound

Akitoshi Suzumura et al.

JOURNAL OF ELECTRONIC MATERIALS (2014)

Add to Collection
Article Chemistry, Multidisciplinary

Thermoelectric Transport in Cu7PSe6 with High Copper Ionic Mobility

Kai S. Weldert et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

Add to Collection
Article Chemistry, Multidisciplinary

BiSbTe-Based Nanocomposites with High ZT : The Effect of SiC Nanodispersion on Thermoelectric Properties

Jianhui Li et al.

ADVANCED FUNCTIONAL MATERIALS (2013)

Add to Collection
Article Chemistry, Multidisciplinary

Analytic Projection From Plane-Wave and PAW Wavefunctions and Application to Chemical-Bonding Analysis in Solids

Stefan Maintz et al.

JOURNAL OF COMPUTATIONAL CHEMISTRY (2013)

Add to Collection
Review Chemistry, Physical

The effect of secondary phase on thermoelectric properties of Zn4Sb3 compound

Gaohua Zhu et al.

NANO ENERGY (2013)

Add to Collection
Article Chemistry, Physical

Tellurium-Free Thermoelectric: The Anisotropic n-Type Semiconductor Bi2S3

Kanishka Biswas et al.

ADVANCED ENERGY MATERIALS (2012)

Add to Collection
Article Physics, Applied

Transport and thermoelectric properties in Copper intercalated TiS2 chalcogenide

E. Guilmeau et al.

APPLIED PHYSICS LETTERS (2011)

Add to Collection
Article Chemistry, Multidisciplinary

Multiple-Filled Skutterudites: High Thermoelectric Figure of Merit through Separately Optimizing Electrical and Thermal Transports

Xun Shi et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)

Add to Collection
Webinars Posters Questions Hubs Funding Journals Papers Connect Collections Reviewers About Us FAQs Mobile App Privacy Policy Terms of Use
© Peeref 2019-2024. All rights reserved.