Related references
Note: Only part of the references are listed.Effect of V Content on Phase Formation and Mechanical Properties of the CoFeNiMnVx High-Entropy Alloys
Man Zhu et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2022)
Investigation of the Effect of the Thermo-Mechanical Processing of Additively Manufactured CoCrFeNiAl0.4 High-Entropy Alloy
Qiang Li et al.
ADVANCED ENGINEERING MATERIALS (2022)
Phase equilibria of VCrMnFeCo high entropy alloys
Gustavo Bertoli et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2022)
Effects of annealing process parameters on microstructural evolution and strength-ductility combination of CoCrFeMnNi high-entropy alloy
Pengfei Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Factors determining solid solution phase formation and stability in CoCrFeNiX0.4 (X=Al, Nb, Ta) high entropy alloys fabricated by powder plasma arc additive manufacturing
Yupeng Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Fine tuning in-sync the mechanical and magnetic properties of FeCoNiAl0.25Mn0.25 high-entropy alloy through cold rolling and annealing treatment
Tiwen Lu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
Superplasticity of high-entropy alloys: a review
Reza Motallebi et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2021)
Joint effect of micro-sized Si particles and nano-sized dispersoids on the flow behavior and dynamic recrystallization of near-eutectic Al-Si based alloys during hot compression
Yuna Wu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Revealing the relationship between microstructures, textures, and mechanical behaviors of cold-rolled Al0.1CoCrFeNi high-entropy alloys
Jinxiong Hou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Dislocation-induced breakthrough of strength and ductility trade-off in a non-equiatomic high-entropy alloy
Wenqi Guo et al.
ACTA MATERIALIA (2020)
Microstructural Characterization of Mechanically Alloyed FeCoNiMnV High Entropy Alloy Consolidated by Spark Plasma Sintering
Fatemeh Alijani et al.
ADVANCED ENGINEERING MATERIALS (2020)
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
E. P. George et al.
ACTA MATERIALIA (2020)
On the phase constituents of three CoCrFeNiX (X = V, Nb, Ta) high-entropy alloys after prolonged annealing
An-Chen Fan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
CoCrFeNiMn high entropy alloy microstructure and mechanical properties after severe cold shape rolling and annealing
Mohammad Sajad Mehranpour et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Effect of Annealing Temperature on Microstructure and Mechanical Properties of a Severe Cold-Rolled FeCoCrNiMn High-Entropy Alloy
Ziyong Li et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)
Carbide precipitation strengthening in fine-grained carbon-doped FeCoCrNiMn high entropy alloy
Jian Peng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Improvement of Microstructure and Mechanical Properties of CoCrCuFeNi High-Entropy Alloys By V Addition
Gang Qin et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
High temperature oxidation study of direct laser deposited Alx CoCrFeNi (X=0.3,0.7) high entropy alloys
A. Mohanty et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Microstructure and properties of bulk Al0.5CoCrFeNi high-entropy alloy by cold rolling and subsequent annealing
Tong Guo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Strong grain-size effect on deformation twinning of an Al0.1CoCrFeNi high-entropy alloy
S. W. Wu et al.
MATERIALS RESEARCH LETTERS (2017)
Deformation stimulated precipitation of a single-phase CoCrFeMnNi high entropy alloy
W. Zhou et al.
INTERMETALLICS (2017)
Microstructure and properties of a CoCrFeNiMn high-entropy alloy processed by equal-channel angular pressing
Hamed Shahmir et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Trade-off between tensile property and formability by partial recrystallization of CrMnFeCoNi high-entropy alloy
Jae Wung Bae et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Formation of a hexagonal closed-packed phase in Al0.5CoCrFeNi high entropy alloy
J. Wang et al.
MRS COMMUNICATIONS (2017)
Mapping the world of complex concentrated alloys
Stephane Gorsse et al.
ACTA MATERIALIA (2017)
A TRIP-assisted dual-phase high-entropy alloy: Grain size and phase fraction effects on deformation behavior
Zhiming Li et al.
ACTA MATERIALIA (2017)
Effect of heavy cryo-rolling on the evolution of microstructure and texture during annealing of equiatomic CoCrFeMnNi high entropy alloy
G. Dan Sathiaraj et al.
INTERMETALLICS (2016)
Atomic-scale homogenization in an fcc-based high-entropy alloy via severe plastic deformation
Hao Yuan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Microstructure and texture of heavily cold-rolled and annealed fcc equiatomic medium to high entropy alloys
G. D. Sathiaraj et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Experimental investigation on recrystallization mechanism of a Ni-base single crystal superalloy
Zhonglin Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Effect of Al content on structure and mechanical properties of the AlxCrNbTiVZr (x=0; 0.25; 0.5; 1) high-entropy alloys
N. Yu. Yurchenko et al.
MATERIALS CHARACTERIZATION (2016)
Second phase formation in the CoCrFeNiMn high entropy alloy after recrystallization annealing
N. D. Stepanov et al.
MATERIALS LETTERS (2016)
Effect of annealing on mechanical properties of a nanocrystalline CoCrFeNiMn high-entropy alloy processed by high-pressure torsion
Hamed Shahmir et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
High-entropy alloy: challenges and prospects
Y. F. Ye et al.
MATERIALS TODAY (2016)
The Strength-Grain Size Relationship in Ultrafine-Grained Metals
N. Balasubramanian et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Hot Deformation Behavior of As-Cast and Homogenized Al0.5CoCrFeNi High Entropy Alloys
Yu Zhang et al.
METALS (2016)
Stress strain behavior of ferrite and bainite with nano-precipitation in low carbon steels
Naoya Kamikawa et al.
ACTA MATERIALIA (2015)
Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation
B. Schuh et al.
ACTA MATERIALIA (2015)
Temperature dependencies of the elastic moduli and thermal expansion coefficient of an equiatomic, single-phase CoCrFeMnNi high-entropy alloy
G. Laplanche et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Nitriding of a high entropy FeNiMnAlCr alloy
Fanling Meng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Effect of starting grain size on the evolution of microstructure and texture during thermo-mechanical processing of CoCrFeMnNi high entropy alloy
G. D. Sathiaraj et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Effect of V content on microstructure and mechanical properties of the CoCrFeMnNiVx high entropy alloys
N. D. Stepanov et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
The optimal number of heifer calves to be reared as dairy replacements
N. Mohd Nor et al.
JOURNAL OF DAIRY SCIENCE (2015)
Steady state flow of the FeCoNiCrMn high entropy alloy at elevated temperatures
J. Y. He et al.
INTERMETALLICS (2014)
Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy
P. P. Bhattacharjee et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Effect of Mn and V on structure and mechanical properties of high-entropy alloys based on CoCrFeNi system
G. A. Salishchev et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Microstructures and properties of high-entropy alloys
Yong Zhang et al.
PROGRESS IN MATERIALS SCIENCE (2014)
A fracture-resistant high-entropy alloy for cryogenic applications
Bernd Gludovatz et al.
SCIENCE (2014)
High-Entropy Alloys: A Critical Review
Ming-Hung Tsai et al.
MATERIALS RESEARCH LETTERS (2014)
The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy
F. Otto et al.
ACTA MATERIALIA (2013)
Criterion for Sigma Phase Formation in Cr- and V-Containing High-Entropy Alloys
Ming-Hung Tsai et al.
MATERIALS RESEARCH LETTERS (2013)
Effects of annealing on microstructure and mechanical properties of nano-grained titanium produced by combination of asymmetric and symmetric rolling
Zhiming Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys
Sheng Guo et al.
JOURNAL OF APPLIED PHYSICS (2011)
Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase
Sheng Guo et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2011)
Atomistic origin of microstrain broadening in diffraction data of nanocrystalline solids
A. Stukowski et al.
ACTA MATERIALIA (2009)
Solid-solution phase formation rules for multi-component alloys
Yong Zhang et al.
ADVANCED ENGINEERING MATERIALS (2008)
Severe plastic deformation (SPD) processes for metals
A. Azushima et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2008)
Producing bulk ultrafine-grained materials by severe plastic deformation
RZ Valiev et al.
JOM (2006)
Nanostructuring of metals by severe plastic deformation for advanced properties
R Valiev
NATURE MATERIALS (2004)
Microstructural development in equiatomic multicomponent alloys
B Cantor et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes
JW Yeh et al.
ADVANCED ENGINEERING MATERIALS (2004)
Severe plastic deformation: simple shear versus pure shear
VM Segal
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Microstructure and strength of nickel at large strains
DA Hughes et al.
ACTA MATERIALIA (2000)
Share Paper
