4.8 Article

Synergistic Effects of Interfacial Energy Level Regulation and Stress Relaxation via a Buried Interface for Highly Efficient Perovskite Solar Cells

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

Diammonium Molecular Configuration-Induced Regulation of Crystal Orientation and Carrier Dynamics for Highly Efficient and Stable 2D/3D Perovskite Solar Cells

Yang Zhong et al.

Summary: The molecular configuration of diammonium spacer cations plays a crucial role in regulating the crystallization kinetic and carrier dynamics of 2D/3D perovskites. By optimizing the Pb-I-Pb angle and facilitating suitable binding energy and hydrogen-bonding, high-quality perovskite films with vertical crystal orientation, mitigatory lattice distortion, and efficient carrier transportation can be achieved, resulting in significantly improved device efficiency and excellent moisture stability.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Article Chemistry, Physical

Molecularly Tailored SnO2/Perovskite Interface Enabling Efficient and Stable FAPbI3 Solar Cells

Yang Zhang et al.

Summary: This study demonstrates a strategy of molecularly tailoring the FAPbI(3)/SnO2 interface to enhance the stability of perovskite solar cells. By optimizing the configuration of C-O and C=O groups, the device achieved a champion power conversion efficiency of 23.5% and maintained good stability under continuous light illumination.

ACS ENERGY LETTERS (2022)

Article Engineering, Environmental

3,5-Difluorophenylboronic acid-modified SnO2 as ETLs for perovskite solar cells: PCE > 22.3%, T82 > 3000 h

Jiajia Zhang et al.

Summary: By modifying SnO2 with FPBA, the trap state density of SnO2 was significantly reduced and better energy-level alignment was achieved, leading to an increased power conversion efficiency of perovskite solar cells. Additionally, the FPBA-modified SnO2-based unencapsulated device showed good stability with over 82% of initial PCE retained after long-term storage.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Physical

Multiple bonding effects of 1-methanesulfonyl-piperazine on the two-step processed perovskite towards efficient and stable solar cells

Xin Yu et al.

Summary: In this study, interfacial engineering was used to improve the device performance of perovskite solar cells (PSCs). A new multifunctional molecule, 1-methanesulfonyl-piperazine (MP), was introduced to modify the perovskite film fabricated through a two-step process. The MP passivation resulted in reduced trap density and suppressed non-radiative recombination, as well as improved crystallinity and decreased residuals. The MP-modified devices exhibited impressive power conversion efficiency (PCE) and enhanced stability.

NANO ENERGY (2022)

Article Chemistry, Multidisciplinary

Buried Interfaces in Halide Perovskite Photovoltaics

Xiaoyu Yang et al.

Summary: Research has shown that losses at buried interfaces in perovskite photovoltaics are mainly caused by sub-microscale extended imperfections and lead-halide inhomogeneities, which are major obstacles to improving device performance. By utilizing passivation molecules for microstructural reconstruction, these losses can be significantly reduced, unlocking the full potential for enhancing device performance.

ADVANCED MATERIALS (2021)

Article Engineering, Environmental

Highly stable inverted non-fullerene OSCs by surface modification of SnO2 with an easy-accessible material

Jianfei Fu et al.

Summary: By modifying SnO2 films with DMAEMA, the energy level regulation and stability of OSCs based on PM6:Y6 were improved, resulting in an increase in power conversion efficiency and maintaining a high level of performance even after long-term storage.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Article Multidisciplinary Sciences

Efficient perovskite solar cells via improved carrier management

Jason J. Yoo et al.

Summary: Metal halide perovskite solar cells have shown great potential to disrupt the silicon solar cell market with their improved performance, yet still face limitations in light-harvesting due to charge carrier recombination. Efforts to enhance charge carrier management offer a path to increase device performance and approach the theoretical efficiency limit of PSCs.

NATURE (2021)

Article Chemistry, Multidisciplinary

One-Source Strategy Boosting Dopant-Free Hole Transporting Layers for Highly Efficient and Stable CsPbI2Br Perovskite Solar Cells

Xinqi Li et al.

Summary: A one-source strategy using the same polymer donor material is proposed to simultaneously dope CsPbI2Br perovskite films and fabricate the hole transport layer, leading to improved film quality and enhanced device performance.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Physical

Interfacial engineering of a thiophene-based 2D/3D perovskite heterojunction for efficient and stable inverted wide-bandgap perovskite solar cells

Cong Chen et al.

Summary: The device treated with TEACl achieves the highest power conversion efficiency and better stability, forming a thiophene-based 2D/3D perovskite heterojunction. This strategy improves the activation energy of ion movement and reduces the dark saturation current density of the device.

NANO ENERGY (2021)

Article Chemistry, Physical

Organic nanocrystals induced surface passivation towards high-efficiency and stable perovskite solar cells

Xin Wang et al.

Summary: A novel nanocrystal-pinning passivation method using BETAB colloidal solution was demonstrated to effectively reduce the defect density of perovskite films, resulting in high efficiency and stability of perovskite solar cells. The resulting planar devices exhibited a champion power conversion efficiency (PCE) of 23.04%, with excellent stability under various conditions.

NANO ENERGY (2021)

Article Chemistry, Physical

Trap State Passivation by Rational Ligand Molecule Engineering toward Efficient and Stable Perovskite Solar Cells Exceeding 23% Efficiency

Lihua Zhu et al.

Summary: Nonradiative recombination losses caused by trap states at the surface and grain boundaries hinder the enhancement of power conversion efficiency and stability in perovskite solar cells. The introduction of 11MA additive successfully improves crystallinity, reduces trap state density, and inhibits ion migration, leading to simultaneous improvement in efficiency and stability. The device with 11MA additive achieves significantly higher PCE and maintains a high level of efficiency after aging for 3000 hours under ambient conditions.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Multidisciplinary

Manipulating SnO2 Growth for Efficient Electron Transport in Perovskite Solar Cells

Zongyao Qian et al.

Summary: The addition of TiAcAc molecule to the SnO2 nanoparticle solution improves the electronic transport properties of SnO2 and enhances the efficiency of perovskite solar cells, while also increasing film uniformity and conductivity. Furthermore, the long alkene groups in TiAcAc act as stabilizers to prevent nanoparticle aggregation, demonstrating great potential for boosting the efficiency of perovskite solar cells.

ADVANCED MATERIALS INTERFACES (2021)

Article Chemistry, Physical

Enhanced electrical properties of Li-salts doped mesoporous TiO2 in perovskite solar cells

Minjin Kim et al.

Summary: The study found that the anions of Li-salt dopants affect the electrical properties of ETLs, with Li2CO3 doping leading to deeper conduction bands and higher efficiency in PSCs.

JOULE (2021)

Article Nanoscience & Nanotechnology

Simultaneous Enhanced Efficiency and Stability of Perovskite Solar Cells Using Adhesive Fluorinated Polymer Interfacial Material

Mei Lyu et al.

Summary: A fluorinated conjugated polymer PFPT3 was developed and used as an interfacial layer in perovskite solar cells, improving both the efficiency and stability of the devices.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Multidisciplinary Sciences

Liquid medium annealing for fabricating durable perovskite solar cells with improved reproducibility

Nengxu Li et al.

Summary: The liquid medium annealing (LMA) technology shows promise in producing high-quality perovskite films and photovoltaic devices with improved crystal growth modulation and film uniformity. This method opens up an effective avenue for scalable and reproducible quality improvement in perovskite films and devices.

SCIENCE (2021)

Article Chemistry, Physical

π-Conjugated Small Molecules Modified SnO2 Layer for Perovskite Solar Cells with over 23% Efficiency

Qiang Lou et al.

Summary: This work presents a new type of SnO2 passivator, which improves the efficiency of perovskite solar cells by optimizing molecular stacking to enhance interfacial characteristics. The impressive power conversion efficiency over 23% achieved with this new passivator is among the highest reported values for triple-cation perovskite systems to date.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Efficient and Stable 2D@3D/2D Perovskite Solar Cells Based on Dual Optimization of Grain Boundary and Interface

Guodong Li et al.

Summary: The development of perovskite solar cells has been faster than other photovoltaic cells, but their practical application is limited by performance and stability issues. A strategy involving 2-PyEA molecules has been designed to enhance the efficiency and stability of perovskite cells, achieving a maximum power conversion efficiency of 23.2% in experiments.

ACS ENERGY LETTERS (2021)

Article Chemistry, Multidisciplinary

Nanoscale interfacial engineering enables highly stable and efficient perovskite photovoltaics

Anurag Krishna et al.

Summary: A molecular-level interface engineering strategy using a multifunctional ligand 2,5-thiophenedicarboxylic acid is presented to enhance the long-term operational and thermal stability of perovskite solar cells (PSCs). The solar cells achieved high operational stability and stabilized power conversion efficiency over 23% after prolonged testing, with insights into the modulation of grain boundaries, local density of states, surface bandgap, and interfacial recombination. Chemical analysis revealed that molecular passivation suppresses interfacial ion diffusion and inhibits irreversible degradation of perovskite, suggesting potential for expedited development of stable PSCs.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Physical

Quantifying the energy loss for a perovskite solar cell passivated with acetamidine halide

Ligang Yuan et al.

Summary: This study investigates the passivation of defects in polycrystalline perovskite films using acetamidine halide, leading to reduced trap state densities and improved efficiencies in perovskite solar cells and LED devices. Passivation with acetamidine halide significantly decreases energy loss and enhances stability of the devices.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Review Nanoscience & Nanotechnology

Minimizing non-radiative recombination losses in perovskite solar cells

Deying Luo et al.

NATURE REVIEWS MATERIALS (2020)

Article Chemistry, Physical

Efficient Perovskite Solar Cells by Reducing Interface-Mediated Recombination: a Bulky Amine Approach

Lusheng Liang et al.

ADVANCED ENERGY MATERIALS (2020)

Article Chemistry, Physical

Permanent Lattice Compression of Lead-Halide Perovskite for Persistently Enhanced Optoelectronic Properties

Karunakara Moorthy Boopathi et al.

ACS ENERGY LETTERS (2020)

Article Multidisciplinary Sciences

Regulating strain in perovskite thin films through charge-transport layers

Ding-Jiang Xue et al.

NATURE COMMUNICATIONS (2020)

Article Multidisciplinary Sciences

A piperidinium salt stabilizes efficient metal-halide perovskite solar cells

Yen-Hung Lin et al.

SCIENCE (2020)

Article Chemistry, Multidisciplinary

Regulating Surface Termination for Efficient Inverted Perovskite Solar Cells with Greater Than 23% Efficiency

Fengzhu Li et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Article Multidisciplinary Sciences

Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)

Eui Hyuk Jung et al.

NATURE (2019)

Article Chemistry, Physical

Probing Strain-Induced Band Gap Modulation in 2D Hybrid Organic-Inorganic Perovskites

Qing Tu et al.

ACS ENERGY LETTERS (2019)

Article Multidisciplinary Sciences

Lattice anchoring stabilizes solution-processed semiconductors

Mengxia Liu et al.

NATURE (2019)

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

Article Chemistry, Physical

Pb-Reduced CsPb0.9Zn0.1I2Br Thin Films for Efficient Perovskite Solar Cells

Hongrui Sun et al.

ADVANCED ENERGY MATERIALS (2019)

Article Chemistry, Multidisciplinary

Interfacial Residual Stress Relaxation in Perovskite Solar Cells with Improved Stability

Hao Wang et al.

ADVANCED MATERIALS (2019)

Article Chemistry, Multidisciplinary

Lattice strain causes non-radiative losses in halide perovskites

Timothy W. Jones et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Article Multidisciplinary Sciences

Maximizing and stabilizing luminescence from halide perovskites with potassium passivation

Mojtaba Abdi-Jalebi et al.

NATURE (2018)

Article Multidisciplinary Sciences

High efficiency planar-type perovskite solar cells with negligible hysteresis using EDTA-complexed SnO2

Dong Yang et al.

NATURE COMMUNICATIONS (2018)

Article Chemistry, Physical

Engineering Stress in Perovskite Solar Cells to Improve Stability

Nicholas Rolston et al.

ADVANCED ENERGY MATERIALS (2018)

Review Chemistry, Multidisciplinary

Energy Level Alignment at Interfaces in Metal Halide Perovskite Solar Cells

Shenghao Wang et al.

ADVANCED MATERIALS INTERFACES (2018)

Article Multidisciplinary Sciences

Excess charge-carrier induced instability of hybrid perovskites

Yuze Lin et al.

NATURE COMMUNICATIONS (2018)

Article Chemistry, Multidisciplinary

Peroptronic devices: perovskite-based light-emitting solar cells

Hak-Beom Kim et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Article Chemistry, Physical

Synergic Interface Optimization with Green Solvent Engineering in Mixed Perovskite Solar Cells

Tongle Bu et al.

ADVANCED ENERGY MATERIALS (2017)

Article Multidisciplinary Sciences

Optical determination of Shockley-Read-Hall and interface recombination currents in hybrid perovskites

Valerio Sarritzu et al.

SCIENTIFIC REPORTS (2017)

Article Multidisciplinary Sciences

Simultaneous band-gap narrowing and carrier-lifetime prolongation of organic-inorganic trihalide perovskites

Lingping Kong et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)

Article Multidisciplinary Sciences

High-efficiency robust perovskite solar cells on ultrathin flexible substrates

Yaowen Li et al.

NATURE COMMUNICATIONS (2016)

Article Chemistry, Multidisciplinary

Solvent Annealing of Perovskite-Induced Crystal Growth for Photovoltaic-Device Efficiency Enhancement

Zhengguo Xiao et al.

ADVANCED MATERIALS (2014)

Article Multidisciplinary Sciences

Radiative efficiency of lead iodide based perovskite solar cells

Kristofer Tvingstedt et al.

SCIENTIFIC REPORTS (2014)

Article Physics, Applied

Bimolecular recombination in polymer/fullerene bulk heterojunction solar cells

LJA Koster et al.

APPLIED PHYSICS LETTERS (2006)