☆ 4.8 Article

Dual Molecular Oxygen Activation Sites on Conjugated Microporous Polymers for Enhanced Photocatalytic Formation of Benzothiazoles

ACS APPLIED MATERIALS & INTERFACES (2023)

Related references

Note: Only part of the references are listed.

Editorial Material Polymer Science

Where porous polymers can make a difference

Robert T. Woodward et al.

EXPRESS POLYMER LETTERS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

A Universal Strategy for Boosting Hydrogen Evolution Activity of Polymer Photocatalysts under Visible Light by Inserting a Narrow-Band-Gap Spacer between Donor and Acceptor

Changzhi Han et al.

Summary: A universal strategy for enhancing the photocatalytic activity of polymer photocatalysts under visible light is reported. By introducing a thiophene unit as a pi-spacer between the electron donors and acceptors to form a D-pi-A molecular structure, the conjugation degree and light absorption range of the polymer can be enhanced. The chemical structure of the resulting polymers can also be controlled by adjusting the feed ratio between the electron donors and acceptors. The optimized D-pi-A copolymer photocatalyst shows impressive hydrogen evolution rate under visible light irradiation and can be further improved with the addition of Pt co-catalyst. This strategy can also be applied to other polymeric photocatalysts, demonstrating its universality in enhancing the photocatalytic activity.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Semiconducting Polymers for Oxygen Evolution Reaction under Light Illumination

Yuanxing Fang et al.

Summary: This review focuses on the photocatalytic technologies and materials of polymeric photocatalysts for the oxygen evolution reaction (OER). Two practical systems, namely particle suspension and film-based photoelectrochemical systems, are discussed. The concept is reviewed in terms of thermodynamics and kinetics, and the key characteristics of polymeric photocatalysts, such as light absorption, charge separation and transfer, and surface oxidation reactions, are examined. Satisfactory OER performance by polymeric photocatalysts could lead to cost-effective, sustainable, and renewable water splitting and other advanced applications using solar energy.

CHEMICAL REVIEWS (2022)

Add to Collection

Article Chemistry, Physical

Polymerization-Enhanced Photocatalysis for the Functionalization of C(sp3)-H Bonds

Shan-Shan Zhu et al.

Summary: A series of conjugated polymeric photocatalysts based on 4CzIPN were synthesized and optimized photocatalyst CPP3 showed superior visible-light-driven functionalization of C(sp(3))-H bonds with high yields; the enhanced intersystem crossing in CPP3 led to its better photocatalytic performance compared to the monomer 4CzIPN, allowing for easy recovery and reuse.

ACS CATALYSIS (2022)

Add to Collection

Article Multidisciplinary Sciences

Designed polymeric conjugation motivates tunable activation of molecular oxygen in heterogeneous organic photosynthesis

Wenhao Sun et al.

Summary: Research on directed generation of ROSs induced by polymeric conjugation in nonmetallic conjugated microporous polymers (CMP) has been reported. The introduction of alkynyl groups allows for tunable molecular oxygen activation, affecting the directed generation of ROSs. The presence or absence of alkynyl bridges influences the mechanism of ROS generation in these CMPs.

SCIENCE BULLETIN (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Combined Skeleton and Spatial Rigidification of AIEgens in 2D Covalent Organic Frameworks for Boosted Fluorescence Emission and Sensing of Antibiotics

Yuanzhe Tang et al.

Summary: This paper proposes a combined skeleton and spatial rigidification method to boost the fluorescence emission efficiency of aggregation-induced emission (AIE) molecules. The experimental results show that the method is effective in enhancing the fluorescence emission of the designed covalent organic frameworks (COFs). The resulting F-COF-2 demonstrates highly sensitive and selective detection of NFT and NZF, surpassing other reported crystalline porous fluorescent materials.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Engineering, Environmental

Phenothiazine-based conjugated microporous polymers: Pore surface and bandgap engineering for visible light-driven aerobic oxidative cyanation

Sizhe Li et al.

Summary: The photocatalytic aerobic oxidative cyanation of tertiary amines using phenothiazine-containing conjugated microporous polymers (CMPs) as heterogeneous visible light-active photocatalysts showed superior catalytic activity, extensive substrate adaptability, and outstanding recyclability. Fine molecular engineering with electron-donating and -withdrawing groups on the comonomer compositions allowed for tuning of the pore surface and band gap of CMPs, leading to enhanced photo-induced charge separation and interaction with substrates. The fluorine-substituted CMP-PTZ-3 demonstrated high efficiency, good stability, and regenerability as a pure organic photocatalyst, providing new insights in designing high-performance photocatalysts through molecular engineering strategy.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Modulating Carrier Transfer over Carbazolic Conjugated Microporous Polymers via Donor Structural Design for Functionalization of Thiophenols

Weijie Zhang et al.

Summary: The study presents a simple structural expansion strategy to facilitate charge transfer in conjugated microporous polymers, enhancing the efficiency of photogenerated carrier transfer and enabling high photocatalytic efficiency. This approach opens up new prospects for further optimization and rational design of photoactive polymers for efficient charge-transfer-mediated reactions.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Review Energy & Fuels

Recent Advances of Conjugated Microporous Polymers in Visible Light-Promoted Chemical Transformations

Zhuangfei Qian et al.

Summary: Conjugated microporous polymers (CMPs), as metal-free, pure organic and heterogeneous photocatalysts, have attracted attention due to their organic nature, ease of synthesis, structural diversity, and low costs. Researchers focus on crucial factors affecting the catalytic performance of CMPs, such as band structure, charge transfer, morphology, as well as specific applications like water splitting, CO2 reduction, and organic photoredox reactions.

SOLAR RRL (2021)

Add to Collection

Review Engineering, Environmental

Recent advances in molecular oxygen activation via photocatalysis and its application in oxidation reactions

Qi Li et al.

Summary: This study discusses the feasibility of using photocatalysis technology to activate molecular oxygen and explores potential applications and activation mechanisms. It summarizes the methods of analyzing ROS, the application of activated molecular oxygen in oxidative reactions, and presents future research challenges and directions.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Review Chemistry, Physical

Strategies and Challenges on Selectivity of Photocatalytic Oxidation of Organic Substances

Lunqiao Xiong et al.

Summary: This review provides an overview of the fundamentals of reactive oxygen species in photocatalytic organic oxidations and discusses strategies to improve the selectivity of high value chemicals. Difficulties and challenges in developing highly selective oxidation photocatalysts are comprehensively discussed to guide future research focus.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Formaldehyde Selectivity in Methanol Partial Oxidation on Silver: Effect of Reactive Oxygen Species, Surface Reconstruction, and Stability of Intermediates

Mustafa Karatok et al.

Summary: The presence of different oxygen species on the Ag(111) catalyst surface has different effects on the methanol oxidation reaction, with low O-e coverage efficiently producing formaldehyde and high oxygen coverage triggering surface reconstruction leading to decreased formaldehyde selectivity and increased CO2 production.

ACS CATALYSIS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Boosting the Photocatalytic Hydrogen Evolution Activity for D-π-A Conjugated Microporous Polymers by Statistical Copolymerization

Chang Shu et al.

Summary: This study developed a series of donor-pi-acceptor (D-pi-A) conjugated organic copolymer photocatalysts by tuning the feed molar ratio of pyrene to dibenzothiophene-S,S-dioxide units, demonstrating high efficiency in hydrogen generation. The photocatalytic activity of the copolymers significantly depends on the molar ratio of donor to acceptor, showing potential for optimizing polymer structure and enhancing photocatalytic performance. The research highlights the efficiency of statistical copolymerization as a strategy to improve the activity of conjugated organic polymer catalysts.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Charge Transfer from Donor to Acceptor in Conjugated Microporous Polymer for Enhanced Photosensitization

Yuan-Zhao Peng et al.

Summary: Decorating conjugated microporous polymers with polycyclic aromatic hydrocarbons has improved photosensitization and facilitated efficient photosynthesis by promoting intersystem crossing and electron-hole separation. The structure-property-activity relationship of these polymers demonstrates a new approach for developing heavy-atom-free heterogeneous photosensitizers with highly efficient sensitizing activity at a molecular level.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Metal-Free Catalysis: A Redox-Active Donor-Acceptor Conjugated Microporous Polymer for Selective Visible-Light-Driven CO2 Reduction to CH4

Soumitra Barman et al.

Summary: This study achieved a two-electron photochemical CO2 reduction process using a metal-free system with the redox-active conjugated microporous polymer TPA-PQ, showing impressive efficiency and selectivity. Mechanistic analysis demonstrated the role of photoactivated ICT in driving the photoreduction of CO2 to CH4 by TPA-PQ. Compared to other similar redox-active CMPs, TPA-PQ exhibited higher catalytic activity towards CO2 photoreduction.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Add to Collection

Article Multidisciplinary Sciences

Adjacent single-atom irons boosting molecular oxygen activation on MnO2

Huayu Gu et al.

Summary: Efficient molecular oxygen activation is crucial for catalytic oxidation reaction, and depends on the construction of active sites. Dual adjacent Fe atoms anchored on MnO2 can assemble into a diatomic site, forming Fe(O = O)Fe for highly efficient CO oxidation. This study demonstrates a new efficient pathway to activate molecular oxygen through single atom technology.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Turn-On Photocatalysis: Creating Lone-Pair Donor-Acceptor Bonds in Organic Photosensitizer to Enhance Intersystem Crossing

Mingjie Liu et al.

Summary: The study demonstrates an alternative strategy of implanting lone-pair donor-acceptor bonds in conjugated covalent organic frameworks (COFs) to enhance triplet generation efficiency. This method shows potential applications in the field of photosensitizer design.

ADVANCED SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Synthesis of benzothiazoles using fluorescein as an efficient photocatalyst under visible light

Wuji Sun et al.

Summary: This work presents a novel and efficient method for synthesizing benzothiazoles using 2-aminothiophenol derivatives and aromatic aldehyde via visible-light-induced condensation cyclization, without the need for metal catalyst or additional oxidant. The method shows good substrate tolerance and can produce a variety of benzothiazoles in high to excellent yields.

MOLECULAR CATALYSIS (2021)

Add to Collection

Article Chemistry, Physical

Bandgap engineering in benzotrithiophene-based conjugated microporous polymers: a strategy for screening metal-free heterogeneous photocatalysts

Songjie Han et al.

Summary: Metal-free conjugated microporous polymers (CMPs) serve as green and sustainable alternatives to classical metal-based photosensitizers. A general strategy of bandgap engineering in the same series of materials was proposed to obtain excellent solid photocatalysts. By modulating the bandgaps, energy levels, and photoelectric performances of CMPs with benzo[1,2-b:3,4-b0:5,6-b00]trithiophene building blocks, the visible-light catalytic activity of BTT-CMP2 was found to be superior and showed extensive substrate applicability and outstanding recyclability.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Multidisciplinary Sciences

Intermolecular cascaded π-conjugation channels for electron delivery powering CO2 photoreduction

Shengyao Wang et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Multidisciplinary Sciences

Metal-free activation of molecular oxygen by covalent triazine frameworks for selective aerobic oxidation

Sara Abednatanzi et al.

SCIENCE ADVANCES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Covalent Triazine Framework Nanoparticles via Size-Controllable Confinement Synthesis for Enhanced Visible-Light Photoredox Catalysis

Wei Huang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Metal-Free Photocatalytic Hydrogenation Using Covalent Triazine Polymers

Yongpan Hu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Review Chemistry, Physical

Heterogeneous Photocatalytic Organic Transformation Reactions Using Conjugated Polymers-Based Materials

Jie Xiao et al.

ACS CATALYSIS (2020)

Add to Collection

Article Chemistry, Physical

Preparation of Hydrophilic Conjugated Microporous Polymers for Efficient Visible Light-Driven Nicotinamide Adenine Dinucleotide Regeneration and Photobiocatalytic Formaldehyde Reduction

Fang Lan et al.

ACS CATALYSIS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Photocatalytic Molecular Oxygen Activation by Regulating Excitonic Effects in Covalent Organic Frameworks

Yunyang Qan et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Fe1/TiO2 Hollow Microspheres: Fe and Ti Dual Active Sites Boosting the Photocatalytic Oxidation of NO

Zhao Hu et al.

SMALL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Forster Resonance Energy Transfer: An Efficient WaytoDevelop Stimulus-Responsive Room-Temperature Phosphorescence Materials and Their Applications

Yunsheng Wang et al.

MATTER (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Advances in Conjugated Microporous Polymers

Jet-Sing M. Lee et al.

CHEMICAL REVIEWS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced Superoxide Generation on Defective Surfaces for Selective Photooxidation

Xianshun Sun et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Review Chemistry, Physical

Poly(benzothiadiazoles) and Their Derivatives as Heterogeneous Photocatalysts for Visible-Light-Driven Chemical Transformations

Run Li et al.

ACS CATALYSIS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Radical-Enhanced Intersystem Crossing in New Bodipy Derivatives and Application for Efficient Triplet-Triplet Annihilation Upconversion

Zhijia Wang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Singlet Oxygen-Engaged Selective Photo-Oxidation over Pt Nanocrystals/Porphyrinic MOF: The Roles of Photothermal Effect and Pt Electronic State

Yu-Zhen Chen et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Design and synthesis of conjugated polymers of tunable pore size distribution

Qingquan Liu et al.

MATERIALS CHEMISTRY AND PHYSICS (2017)

Add to Collection

Article Chemistry, Physical

Photocatalytic Regioselective and Stereoselective [2+2] Cycloaddition of Styrene Derivatives Using a Heterogeneous Organic Photocatalyst

Run Li et al.

ACS CATALYSIS (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Generation and Detection of Reactive Oxygen Species in Photocatalysis

Yoshio Nosaka et al.

CHEMICAL REVIEWS (2017)

Add to Collection

Article Chemistry, Organic

Facile Synthesis of 2,5-Disubstituted Thiazoles from Terminal Alkynes, Sulfonyl Azides, and Thionoesters

Tomoya Miura et al.

ORGANIC LETTERS (2015)

Add to Collection

Review Chemistry, Multidisciplinary

The benzazole scaffold: a SWAT to combat Alzheimer's disease

Sabrina Noel et al.

CHEMICAL SOCIETY REVIEWS (2013)

Add to Collection

Article Multidisciplinary Sciences

Probing the catalytic activity of porous graphene oxide and the origin of this behaviour

Chenliang Su et al.

NATURE COMMUNICATIONS (2012)

Add to Collection

© Peeref 2019-2024. All rights reserved.