4.8 Article

Room-Temperature Pseudo-Solid-State Iron Fluoride Conversion Battery with High Ionic Conductivity

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

The Role of Electrolyte Composition in Enabling Li Metal-Iron Fluoride Full-Cell Batteries

Bryan R. Wygant et al.

Summary: FeF3 conversion cathodes show high theoretical energy density and potential for application, but previous studies were conducted with excess lithium, which did not accurately reflect the cathode's influence on battery performance. This study demonstrates the importance of considering the electrolyte's impact on full-cell performance and achieves the first full-cell demonstration of a Li/FeF3 battery.

ADVANCED SCIENCE (2022)

Article Chemistry, Physical

Modifying Ionogel Solid-Electrolytes for Complex Electrochemical Systems

David S. Ashby et al.

Summary: The solution processability of ionogel solid electrolytes has gained attention as a means to address interface and fabrication issues in solid electrolytes. By replacing the trapped ionic liquid component, the properties of the ionogel can be tuned. Experimental results show that gels with different liquid components exhibit good electrochemical performance under various conditions.

ACS APPLIED ENERGY MATERIALS (2022)

Article Multidisciplinary Sciences

Unlocking solid-state conversion batteries reinforced by hierarchical microsphere stacked polymer electrolyte

Jiulin Hu et al.

Summary: The study introduces an all-solid-state Li-FeF3 conversion battery reinforced by hierarchical microsphere stacked polymer electrolyte for the first time. The utilization of a lightweight gC3N4 stuffed polyethylene oxide-based electrolyte enables improved conductivity and Li+ transference number, as well as enhanced stability and cycling performance of the battery. The results provide a promising solution for high energy and safe conversion-type Li metal batteries.

SCIENCE BULLETIN (2021)

Article Materials Science, Characterization & Testing

PVDF-HFP/NKBT composite dielectrics: Perovskite particles induce the appearance of an additional dielectric relaxation process in ferroelectric polymer matrix

Vera P. Pavlovic et al.

Summary: NKBT perovskite particles were synthesized and used as fillers in PVDF-HFP copolymer, resulting in enhanced dielectric properties in the composite. Introduction of NKBT particles also induced the appearance of an additional transition peak in the dielectric spectra of the copolymer matrix.

POLYMER TESTING (2021)

Review Chemistry, Multidisciplinary

State-Of-The-Art Quantification of Polymer Solution Viscosity for Plastic Waste Recycling

Rita Kol et al.

Summary: This review explores solvent-based recycling for plastic-containing waste, focusing on the viscosity behavior of polymer solutions and its impacts on filtration and centrifugation processes. Various non-Newtonian viscosity models are discussed, providing insights for handling polymer solutions at different concentrations and shear rates.

CHEMSUSCHEM (2021)

Article Energy & Fuels

Polar β-Phase PVdF-HFP-Based Freestanding and Flexible Gel Polymer Electrolyte for Better Cycling Stability in a Na Battery

Raghvendra Mishra et al.

Summary: A stable polar gel polymer electrolyte (GPE) with high thermal stability and high ionic conductivity has been synthesized for improved performance of sodium battery. The incorporation of PVdF-HFP resulted in a polar beta-phase structure in the electrolyte, leading to high capacity and good stability in sodium battery.

ENERGY & FUELS (2021)

Article Chemistry, Physical

Metal organic framework reinforced polymer electrolyte with high cation transference number to enable dendrite-free solid state Li metal conversion batteries

Xiaoxue Wu et al.

Summary: The introduction of Ce-based metal organic framework nano-filler significantly enhances the performance of solid polymer electrolytes, including ion conductivity, Li+ transference number, and stability, while effectively suppressing Li dendrites.

JOURNAL OF POWER SOURCES (2021)

Article Electrochemistry

Fast Charging of Energy-Dense Lithium Metal Batteries in Localized Ether-Based Highly Concentrated Electrolytes

Yongjun Leng et al.

Summary: The study found that Li metal anodes can achieve high Coulombic efficiency in highly concentrated electrolytes at elevated temperatures, while LMBs with NMC811 cathodes can achieve stable charge and discharge cycles at 60 degrees Celsius.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Article Chemistry, Physical

Influence of Different Solvents and High-Electric-Field Cycling on Morphology and Ferroelectric Behavior of Poly(Vinylidene Fluoride-Hexafluoropropylene) Films

Till Maelzer et al.

Summary: P(VdF-HFP) films were prepared using high and low volatile solvents, resulting in different surface structures and crystal phase compositions, influencing their ferroelectric behavior. Films prepared with LVS solvent exhibited stronger ferroelectric behavior under high electric fields, while those from HVS solvent tended to have alpha-phase domains.

MATERIALS (2021)

Article Chemistry, Physical

Enhanced Li+ Transport in Ionic Liquid-Based Electrolytes Aided by Fluorinated Ethers for Highly Efficient Lithium Metal Batteries with Improved Rate Capability

Xu Liu et al.

Summary: FSI-based ionic liquids show promise as electrolytes for longlife and safe lithium metal batteries, and the addition of BTFE can effectively enhance Li+ transport while maintaining compatibility with lithium metal. Raman spectroscopy and small-angle X-ray scattering demonstrate improved Li+ transport in the optimized electrolyte, [LiFSI]3[Pyr(14)FSI]4[BTFE]4 (Li3Py4BT4), leading to better performance in Li/LiFePO4 cells.

SMALL METHODS (2021)

Article Nanoscience & Nanotechnology

A Three-Dimensional Nano-web Scaffold of Ferroelectric Beta-PVDF Fibers for Lithium Metal Plating and Stripping

Chihyun Hwang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Multidisciplinary Sciences

Role of inner solvation sheath within salt-solvent complexes in tailoring electrode/electrolyte interphases for lithium metal batteries

Xiaodi Ren et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2020)

Review Chemistry, Multidisciplinary

Polymer Electrolytes for Lithium-Based Batteries: Advances and Prospects

Dong Zhou et al.

Article Chemistry, Multidisciplinary

3D Honeycomb Architecture Enables a High-Rate and Long-Life Iron (III) Fluoride-Lithium Battery

Feixiang Wu et al.

ADVANCED MATERIALS (2019)

Article Nanoscience & Nanotechnology

Electrochemical and Spectroscopic Analysis of the lonogel-Electrode Interface

David S. Ashby et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Physical

Accurate Determination of Coulombic Efficiency for Lithium Metal Anodes and Lithium Metal Batteries

Brian D. Adams et al.

ADVANCED ENERGY MATERIALS (2018)

Article Chemistry, Multidisciplinary

Iron Fluoride-Carbon Nanocomposite Nanofibers as Free-Standing Cathodes for High-Energy Lithium Batteries

Wenbin Fu et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Article Chemistry, Multidisciplinary

High-Voltage Lithium-Metal Batteries Enabled by Localized High-Concentration Electrolytes

Shuru Chen et al.

ADVANCED MATERIALS (2018)

Article Electrochemistry

A lithium iron phosphate reference electrode for ionic liquid electrolytes

Johannes Wandt et al.

ELECTROCHEMISTRY COMMUNICATIONS (2018)

Review Chemistry, Multidisciplinary

Conversion cathodes for rechargeable lithium and lithium-ion batteries

Feixiang Wu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Article Electrochemistry

Predictive Design of Shear-Thickening Electrolytes for Safety Considerations

Brian H. Shen et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Review Chemistry, Multidisciplinary

Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review

Xin-Bing Cheng et al.

CHEMICAL REVIEWS (2017)

Article Chemistry, Multidisciplinary

Lithium-Iron Fluoride Battery with In Situ Surface Protection

Wentian Gu et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Article Chemistry, Multidisciplinary

Intercalation Compounds as Inner Reference Electrodes for Reproducible and Robust Solid-Contact Ion-Selective Electrodes

Yu Ishige et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Article Materials Science, Multidisciplinary

Rhombohedral iron trifluoride with a hierarchized macroporous/mesoporous texture from gaseous fluorination of iron disilicide

Katia Guerin et al.

MATERIALS CHEMISTRY AND PHYSICS (2016)

Review Chemistry, Physical

Poly(ethylene oxide)-based electrolytes for lithium-ion batteries

Zhigang Xue et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Article Electrochemistry

Reliable reference electrodes for lithium-ion batteries

F. La Mantia et al.

ELECTROCHEMISTRY COMMUNICATIONS (2013)

Article Materials Science, Multidisciplinary

Determination of crystallite size in polished graphitized carbon by Raman spectroscopy

O. A. Maslova et al.

PHYSICAL REVIEW B (2012)

Review Chemistry, Multidisciplinary

Ionogels, ionic liquid based hybrid materials

Jean Le Bideau et al.

CHEMICAL SOCIETY REVIEWS (2011)

Article Thermodynamics

Static Relative Dielectric Permittivities of Ionic Liquids at 25 °C

Mian-Mian Huang et al.

JOURNAL OF CHEMICAL AND ENGINEERING DATA (2011)

Article Chemistry, Physical

Lithium bis(fluorosulfonyl)imide-PYR14TFSI ionic liquid electrolyte compatible with graphite

Martina Nadherna et al.

JOURNAL OF POWER SOURCES (2011)

Article Chemistry, Physical

New Insights to Self-Aggregation in Ionic Liquid Electrolytes for High-Energy Electrochemical Devices

Miriam Kunze et al.

ADVANCED ENERGY MATERIALS (2011)

Article Instruments & Instrumentation

Phase transition in poly(vinylidene fluoride) investigated with micro-Raman spectroscopy

CJL Constantino et al.

APPLIED SPECTROSCOPY (2005)