4.8 Article

Composite Braided Fabric Coupled with Photothermal and Electrothermal Processes for Stable and Continuous All-Day Desalination

Related references

Note: Only part of the references are listed.
Article Engineering, Chemical

A high-efficient and ultra-strong interfacial solar evaporator based on carbon-fiber fabric for seawater and wastewater purification

Dongdong Tong et al.

Summary: Developed a multilayer carbon-fiber fabric evaporator with efficient solar-driven water purification capacity, which can effectively purify seawater and organic wastewater, and inhibit the volatilization of low-boiling-point organic components.

DESALINATION (2022)

Article Chemistry, Physical

All-in-one polymer sponge composite 3D evaporators for simultaneous high-flux solar-thermal desalination and electricity generation

Yangzhe Xu et al.

Summary: This study presents a 3D dual-functional solar-thermal evaporator that can simultaneously produce high-flux desalinated water and generate electricity. The sponge composites used in the evaporator exhibit superior solar absorption and anti-salt fouling capabilities, allowing for stable production of clean water and electricity under solar irradiation.

NANO ENERGY (2022)

Article Energy & Fuels

Solar steam generation by porous conducting polymer hydrogel

Can Ge et al.

Summary: A hydrogel made from conductive polymer PEDOT:PSS is used as a photothermal material, which reduces energy consumption during water molecule evaporation. The hydrogel achieves high evaporation rate and efficiency, and maintains good performance after long-term desalination.

SOLAR ENERGY (2022)

Review Materials Science, Multidisciplinary

Recent Progress in Electrospun Nanofibers for the Membrane Distillation of Hypersaline Wastewaters

Di Xu et al.

Summary: This review discusses the recent progress in using electrospun nanofibers for membrane distillation of hypersaline wastewaters. Specially designed wettable membrane interfaces and welding-pore structured membranes are proposed to enhance distillation efficiency and durability.

ADVANCED FIBER MATERIALS (2022)

Article Chemistry, Physical

Interfacial solar evaporator synergistic phase change energy storage for all-day steam generation

Le Geng et al.

Summary: This study reports a solar-driven interfacial evaporator composed of polypyrrole and nanotube aerogel composite materials, which achieves highly efficient all-day solar steam generation through the combination of photothermal conversion and photothermal energy storage.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Materials Science, Multidisciplinary

Stretchable and Superhydrophilic Polyaniline/Halloysite Decorated Nanofiber Composite Evaporator for High Efficiency Seawater Desalination

Jiang Han et al.

Summary: This study presents a polyaniline/halloysite nanotubes-decorated PU nanofiber with outstanding light absorption and photothermal conversion performance for high performance solar desalination. The nanofiber composite exhibits superior surface stability and durability during stretching, abrasion, and ultrasonic washing tests.

ADVANCED FIBER MATERIALS (2022)

Review Materials Science, Multidisciplinary

Emerging Two-dimensional Materials Constructed Nanofluidic Fiber: Properties, Preparation and Applications

Shuo Li et al.

Summary: 2D nanofluidic fiber electrodes, combining efficient ion transport and biofriendliness, are an ideal platform for wearable electronics and medical implant electrodes. The tailored ion transport dynamics in nanofluidic channels enable minimized charge transfer resistance. Challenges and potential applications in fibrous 2D nanofluidic construction and ion transport mechanism study are also discussed.

ADVANCED FIBER MATERIALS (2022)

Article Green & Sustainable Science & Technology

Solar-Driven All-in-One Interfacial Water Evaporator Based on Electrostatic Flocking

Yang Guo et al.

Summary: The study introduces an all-in-one interfacial water evaporator based on electrostatic flocking technology, featuring flexibility, low cost, and large-scale production. By using hydrophilic microfibers on one side to enhance light trapping and hydrophobic microfibers on the other side to reduce heat conduction, the evaporator achieves high evaporation rates of 1.32 kg m(-2)h(-1)for pure water and 1.10 kg m(-2)h(-1)for seawater. Additionally, the evaporator shows resistance to salt accumulation, ensuring stability in brine and offering a convenient solution to global freshwater scarcity.

ADVANCED SUSTAINABLE SYSTEMS (2021)

Article Nanoscience & Nanotechnology

Versatile Janus Composite Nonwoven Solar Absorbers with Salt Resistance for Efficient Wastewater Purification and Desalination

Shuangjie Sun et al.

Summary: The study presents a solar absorber with high evaporation rate and energy efficiency for treating saline water, wastewater, and oil-containing water. The specially designed structure and Janus wetting properties enable the absorber to efficiently purify water and separate oil from water.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Optics

Construction of an integrated multi-layer textile for solar-driven steam generation

Mengyu Xie et al.

Summary: A novel integrated multi-layer textile composed of reduced graphene oxide/cotton fabric, cotton yarn, and polypropylene fabric has been proposed for solar-driven steam generation, achieving a remarkable evaporation rate. The multi-layer structure plays a key role in enhancing the evaporation performance, providing potential opportunities for the development of solar-driven steam generation technology.

APPLIED OPTICS (2021)

Article Chemistry, Multidisciplinary

Hierarchical Photothermal Fabrics with Low Evaporation Enthalpy as Heliotropic Evaporators for Efficient, Continuous, Salt-Free Desalination

Zixiao Liu et al.

Summary: Hierarchical PAN@CuS fabrics were developed to reduce water-evaporation enthalpy and prevent solid salt crystallization, leading to a heliotropic evaporator prototype. This model showed high-rate evaporation and saturated brine production under solar irradiation, with minimal reduction in evaporation rate under inclined sunlight compared to traditional floating evaporators.

ACS NANO (2021)

Article Chemistry, Physical

Templating synthesis of natural cotton-based hierarchically structured carbon hollow microfibers for high-performance solar vapor generation

Shijun Lei et al.

Summary: This study presents a hierarchical carbon nanostructure based on artificial hollow frameworks on natural cotton to achieve favorable evaporation properties. The hollow carbonized cotton microfibers demonstrated an extremely high water evaporation rate under 1 sun illumination, showing outstanding solar desalination performance with excellent stability. This new material design offers a novel approach to solar vapor generation for various practical applications.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Chemistry, Multidisciplinary

Engineering Hydrogels for Efficient Solar Desalination and Water Purification

Youhong Guo et al.

Summary: This article highlights the recent progress of hydrogels as a highly tunable material platform for solar-powered desalination and water purification. Strategies to promote efficient solar-to-vapor conversion are discussed, with emphasis on reducing water evaporation enthalpy, optimizing heat distribution, and tailoring the evaporation surface.

ACCOUNTS OF MATERIALS RESEARCH (2021)

Article Nanoscience & Nanotechnology

Doping AIE Photothermal Molecule into All-Fiber Aerogel with Self-Pumping Water Function for Efficiency Solar Steam Generation

Haoxuan Li et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Review Chemistry, Physical

Emerging Materials and Strategies for Personal Thermal Management

Run Hu et al.

ADVANCED ENERGY MATERIALS (2020)

Article Nanoscience & Nanotechnology

All-Day Freshwater Harvesting through Combined Solar-Driven Interfacial Desalination and Passive Radiative Cooling

Jiale Xu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Nanoscience & Nanotechnology

Multifunctional nanocoated membranes for high-rate electrothermal desalination of hypersaline waters

Kuichang Zuo et al.

NATURE NANOTECHNOLOGY (2020)

Article Green & Sustainable Science & Technology

Biomass derived Janus solar evaporator for synergic water evaporation and purification

Yi Lu et al.

SUSTAINABLE MATERIALS AND TECHNOLOGIES (2020)

Article Polymer Science

Efficient method of recycling carbon fiber from the waste of carbon fiber reinforced polymer composites

Jianying Deng et al.

POLYMER DEGRADATION AND STABILITY (2020)

Article Chemistry, Physical

An all-day solar-driven vapor generator via photothermal and Joule-heating effects

Yang Guo et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Article Chemistry, Multidisciplinary

Topology-Controlled Hydration of Polymer Network in Hydrogels for Solar-Driven Wastewater Treatment

Xingyi Zhou et al.

ADVANCED MATERIALS (2020)

Article Chemistry, Physical

Bio-derived ultrathin membrane for solar driven water purification

Xiao Han et al.

NANO ENERGY (2019)

Article Multidisciplinary Sciences

A photothermal reservoir for highly efficient solar steam generation without bulk water

Xuan Wu et al.

SCIENCE BULLETIN (2019)

Article Energy & Fuels

Coupled photothermal and joule-heating process for stable and efficient interfacial evaporation

Jian Huang et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)

Review Chemistry, Physical

Challenges and Opportunities for Solar Evaporation

Chaoji Chen et al.

JOULE (2019)

Article Chemistry, Multidisciplinary

A hydrogel-based antifouling solar evaporator for highly efficient water desalination

Xingyi Zhou et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Article Nanoscience & Nanotechnology

Fiber-Based, Double-Sided, Reduced Graphene Oxide Films for Efficient Solar Vapor Generation

Ankang Guo et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Chemistry, Physical

Functionalization of cotton fabrics through thermal reduction of graphene oxide

Guangming Cai et al.

APPLIED SURFACE SCIENCE (2017)

Article Materials Science, Composites

Improved mechanical properties of carbon fiber/graphene oxide-epoxy hybrid composites

Abhishek K. Pathak et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2016)