☆ 4.8 Article

Spontaneous Formation of a Ligand-Based 2D Capping Layer on the Surface of Quasi-2D Perovskite Films

ACS APPLIED MATERIALS & INTERFACES (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Millimeter-Sized Clusters of Triple Cation Perovskite Enables Highly Efficient and Reproducible Roll-to-Roll Fabricated Inverted Perovskite Solar Cells

Mostafa Othman et al.

Summary: A new method utilizing hot deposition technique to fabricate perovskite films has been reported, achieving high efficiency in roll-to-roll coated flexible solar cells. By improving the perovskite crystallinity and charge-transfer efficiency, a maximum efficiency of 12% was achieved.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Surface Passivation Using 2D Perovskites toward Efficient and Stable Perovskite Solar Cells

Guangbao Wu et al.

Summary: 3D perovskite solar cells face challenges in surface defects and material interplay. 2D perovskites provide better stability as a protective barrier. Surface passivation using 2D perovskites enables higher efficiency and stability.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Brownian Tree-Shaped Dendrites in Quasi-2D Perovskite Films and Their Impact on Photovoltaic Performance

Fei Zheng et al.

Summary: This study reports the formation mechanism and structure characteristics of tree-shaped dendrites in quasi-2D perovskite films doped with MACl. The dendrites are assembled from large-n RPPs-dominated grains, while the nondendritic area is composed of small-n RPPs grains and associated with film surface pits caused by the evaporation of MACl.

ADVANCED MATERIALS INTERFACES (2022)

Add to Collection

Article Engineering, Environmental

High-performance quasi-2D perovskite solar cells with power conversion efficiency over 20% fabricated in humidity-controlled ambient air

Xue Lai et al.

Summary: The study demonstrates that using fluorinated benzylammonium iodide as a bulky cation to fabricate quasi-2D perovskite solar cells can result in vertically oriented films with fewer grain boundaries and pinholes, ultimately leading to improved charge collection efficiency and higher power conversion efficiency.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Quasi-2D Bilayer Surface Passivation for High Efficiency Narrow Bandgap Perovskite Solar Cells

Danni Yu et al.

Summary: The combination of comprehensive surface passivation and effective interface carrier transfer plays a critical role in high-performance perovskite solar cells. A new molecule, 2-thiopheneethylamine thiocyanate (TEASCN), is synthesized to construct a bilayer quasi-2D structure on a tin-lead mixed perovskite surface. This bilayer structure passivates the perovskite surface and ensures effective carrier transfer, resulting in improved open-circuit voltage and certified efficiency.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Add to Collection

Review Physics, Applied

X-ray diffraction of photovoltaic perovskites: Principles and applications

Wen Liang Tan et al.

Summary: This article introduces the principles and applications of X-ray diffraction (XRD) techniques for characterizing the microstructure of perovskite thin films. It focuses on best practices in data collection and analysis, discusses methods for extracting microstructural information from diffraction data, and demonstrates the applications of XRD techniques in characterizing perovskite thin films.

APPLIED PHYSICS REVIEWS (2022)

Add to Collection

Article Energy & Fuels

Intact 2D/3D halide junction perovskite solar cells via solid-phase in-plane growth

Yeoun-Woo Jang et al.

Summary: Researchers have developed a solid-phase method to grow phase-pure two-dimensional perovskites in perovskite solar cells, enhancing device efficiency and stability. By growing a stable two-dimensional film on top of a three-dimensional film using a solvent-free method, an intact 2D/3D heterojunction is formed, resulting in high photovoltage in the device.

NATURE ENERGY (2021)

Add to Collection

Article Multidisciplinary Sciences

Crystallization in one-step solution deposition of perovskite films: Upward or downward?

Shangshang Chen et al.

Summary: Research has shown that perovskite films prepared by one-step solution processes grow downward during thermal annealing, starting from an intermediate phase rather than from bottom to top. Understanding this vertical heterogeneity of perovskite films is crucial as it significantly impacts the efficiency and stability of perovskite solar cells.

SCIENCE ADVANCES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Layer-by-layer anionic diffusion in two-dimensional halide perovskite vertical heterostructures

Akriti et al.

Summary: The use of two-dimensional halide perovskites improves chemical stability and suppresses anionic diffusion in solid-state devices, leading to enhanced device performance. However, the role of organic cations in inhibiting anionic diffusion is not yet fully understood. Our quantitative investigation of anionic interdiffusion in atomically flat 2D vertical heterojunctions reveals a 'quantized' layer-by-layer diffusion model that provides important insights into the mechanism of anionic diffusion in 2D perovskites.

NATURE NANOTECHNOLOGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Mobile Media Promotes Orientation of 2D/3D Hybrid Lead Halide Perovskite for Efficient Solar Cells

Ning Zhou et al.

Summary: Researchers have successfully fabricated highly oriented 2D/3D hybrid perovskite films and achieved efficient solar cells by using bulky organic cations. These findings provide new insights for the selection of bulky cations and further exploration of more functional organic cations.

ACS NANO (2021)

Add to Collection

Article Energy & Fuels

Solar cell efficiency tables (Version 58)

Martin A. Green et al.

Summary: This article presents consolidated tables showing the highest confirmed efficiencies for solar cells and modules, along with guidelines for inclusion of results and a review of new entries since January 2021.

PROGRESS IN PHOTOVOLTAICS (2021)

Add to Collection

Article Multidisciplinary Sciences

Stabilizing perovskite-substrate interfaces for high-performance perovskite modules

Shangshang Chen et al.

Summary: The study found that DMSO liquid additive trapped in perovskite-substrate interfaces during film formation led to voids, accelerating film degradation. Partial replacement of DMSO with solid-state carbohydrazide reduced interfacial voids and increased stability. Blade-coated p-i-n structure PSCs achieved a maximum PCE of 23.6% without efficiency loss after stability tests, demonstrating improved efficiency and stability with the new approach.

SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

A sandwich-like structural model revealed for quasi-2D perovskite films†

Fei Zheng et al.

Summary: A new sandwich-like structural model is proposed to describe the phase distribution of RPPs, offering valuable insights for improving the performance of 2D PSCs.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Add to Collection

Article Energy & Fuels

Two-dimensional Ruddlesden-Popper layered perovskite solar cells based on phase-pure thin films

Chao Liang et al.

Summary: Introducing molten salt spacers can produce phase-pure quantum wells and enhance the performance of solar cells. Two-dimensional Ruddlesden-Popper layered metal-halide perovskites have better stability and optoelectronic properties compared to their three-dimensional counterparts.

NATURE ENERGY (2021)

Add to Collection

Article Optics

Efficient and stable Ruddlesden-Popper perovskite solar cell with tailored interlayer molecular interaction

Hui Ren et al.

NATURE PHOTONICS (2020)

Add to Collection

Review Energy & Fuels

A review on perovskite solar cells: Evolution of architecture, fabrication techniques, commercialization issues and status

Priyanka Roy et al.

SOLAR ENERGY (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Revealing the Role of Methylammonium Chloride for Improving the Performance of 2D Perovskite Solar Cells

Fei Zheng et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Multidisciplinary Sciences

Two-dimensional halide perovskite lateral epitaxial heterostructures

Enzheng Shi et al.

NATURE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Organic-Salt-Assisted Crystal Growth and Orientation of Quasi-2D Ruddlesden-Popper Perovskites for Solar Cells with Efficiency over 19%

Hongtao Lai et al.

ADVANCED MATERIALS (2020)

Add to Collection

Editorial Material Chemistry, Physical

Stabilizing High Efficiency Perovskite Solar Cells with 3D-2D Heterostructures

Wenchao Huang et al.

JOULE (2020)

Add to Collection

Review Chemistry, Physical

Crystallization Kinetics in 2D Perovskite Solar Cells

Youkui Xu et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Crystallisation control of drop-cast quasi-2D/3D perovskite layers for efficient solar cells

Chuantian Zuo et al.

COMMUNICATIONS MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Direct assessment of structural order and evidence for stacking faults in layered hybrid perovskite films from X-ray scattering measurements

Wen Liang Tan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Advances in two-dimensional organic-inorganic hybrid perovskites

Fei Zhang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Universal approach toward high-efficiency two-dimensional perovskite solar cells via a vertical-rotation process

Yi Yang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced Charge Transport in 2D Perovskites via Fluorination of Organic Cation

Fei Zhang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Article Multidisciplinary Sciences

Unveiling the operation mechanism of layered perovskite solar cells

Yun Lin et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Physical

Triggering the Passivation Effect of Potassium Doping in Mixed-Cation Mixed-Halide Perovskite by Light Illumination

Fei Zheng et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Ligand-Size Related Dimensionality Control in Metal Halide Perovskites

Peirui Cheng et al.

ACS ENERGY LETTERS (2019)

Add to Collection

Article Chemistry, Physical

Self-Assembled 2D Perovskite Layers for Efficient Printable Solar Cells

Chuantian Zuo et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Excitons in 2D Organic-Inorganic Halide Perovskites

Catherine M. Mauck et al.

TRENDS IN CHEMISTRY (2019)

Add to Collection

Article Chemistry, Physical

Understanding Film Formation Morphology and Orientation in High Member 2D Ruddlesden-Popper Perovskites for High-Efficiency Solar Cells

Chan Myae Myae Soe et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

In Situ Growth of 2D Perovskite Capping Layer for Stable and Efficient Perovskite Solar Cells

Peng Chen et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Charge-Carrier Dynamics and Crystalline Texture of Layered Ruddlesden-Popper Hybrid Lead Iodide Perovskite Thin Films

Naveen R. Venkatesan et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Article Chemistry, Physical

Suppressed Ion Migration along the In-Plane Direction in Layered Perovskites

Xun Xiao et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Article Chemistry, Physical

Compositional and orientational control in metal halide perovskites of reduced dimensionality

Rafael Quintero-Bermudez et al.

NATURE MATERIALS (2018)

Add to Collection

Review Chemistry, Multidisciplinary

2D Ruddlesden-Popper Perovskites for Optoelectronics

Yani Chen et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Observation of Internal Photoinduced Electron and Hole Separation in Hybrid Two-Dimentional Perovskite Films

Junxue Liu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Add to Collection

Article Energy & Fuels

Efficient ambient-air-stable solar cells with 2D-3D heterostructured butylammonium-caesium-formamidinium lead halide perovskites

Zhiping Wang et al.

NATURE ENERGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

High Members of the 2D Ruddlesden-Popper Halide Perovskites: Synthesis, Optical Properties, andSolar Cellsof ( CH3( CH2)3NH3)2( CH3NH3)4Pb5I16

Constantinos C. Stoumpos et al.

CHEM (2017)

Add to Collection

Article Chemistry, Physical

Ruddlesden-Popper Hybrid Lead Iodide Perovskite 2D Homologous Semiconductors

Constantinos C. Stoumpos et al.

CHEMISTRY OF MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Ligand-Stabilized Reduced-Dimensionality Perovskites

Li Na Quan et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Add to Collection

Article Multidisciplinary Sciences

High-efficiency two-dimensional Ruddlesden-Popper perovskite solar cells

Hsinhan Tsai et al.

NATURE (2016)

Add to Collection

Article Chemistry, Multidisciplinary

2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications

Duyen H. Cao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Add to Collection

Article Chemistry, Physical

Intrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite

Bert Conings et al.

ADVANCED ENERGY MATERIALS (2015)

Add to Collection

Review Chemistry, Multidisciplinary

25th Anniversary Article: What Can Be Done with the Langmuir-Blodgett Method? Recent Developments and its Critical Role in Materials Science

Katsuhiko Ariga et al.

ADVANCED MATERIALS (2013)

Add to Collection

Article Chemistry, Physical

Molecular structure of surface-active salt solutions: Photoelectron spectroscopy and molecular dynamics simulations of aqueous tetrabutylammonium iodide

B Winter et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.