☆ 4.8 Article

Incorporating Binary Metal Oxides in Poly(ethylene oxide)-Based Solid Electrolytes by Vapor Phase Infiltration

ACS APPLIED MATERIALS & INTERFACES (2023)

Related references

Note: Only part of the references are listed.

Article Electrochemistry

Highly conductive gel polymer electrolytes for sodium-ion batteries with hard carbon anodes

Agnieszka Gabryelczyk et al.

Summary: This study aims to introduce new sodium conductive gel polymer electrolytes with binary polymer matrix and binary plasticizer to overcome the safety issues, incompatibility of sodium with many electrode materials, and limited specific energy in sodium-ion batteries.

ELECTROCHIMICA ACTA (2023)

Add to Collection

Article Thermodynamics

Electrospun derived polymer-garnet composite quasi solid state electrolyte with low interface resistance for lithium metal batteries

Arunkumar Rajamani et al.

Summary: Polymer garnet composite electrolyte is a stable electrolyte that has the potential to replace hazardous and unstable liquid electrolytes in lithium-ion batteries. In this study, a polymer blend-based garnet composite quasi solid state electrospun electrolyte was developed for lithium metal batteries. The inclusion of LLZTO into the polymer matrix enhanced the ionic conductivity and suppressed the growth of lithium dendrites.

ENERGY (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Lignin as Polymer Electrolyte Precursor for Stable and Sustainable Potassium Batteries

Sabrina Trano et al.

Summary: In this study, a lignin-based electrolyte was successfully designed, which exhibited a wide stability window and high ionic conductivity, leading to significant electrochemical performance improvement in potassium batteries. This represents a milestone in utilizing renewable resources for potassium battery research.

CHEMSUSCHEM (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Cardanol-Derived Epoxy Resins as Biobased Gel Polymer Electrolytes for Potassium-Ion Conduction

Eleonora Manarin et al.

Summary: This study developed biobased gel polymer electrolyte (GPE) membranes through esterification reaction, showing excellent electrochemical stability and suitable ionic conductivity for potassium-ion battery fabrication.

ACS APPLIED POLYMER MATERIALS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Designing photocured macromolecular matrices for stable potassium batteries

Matteo Gandolfo et al.

Summary: The preparation and characterization of the first photocured gel polymer electrolyte for potassium batteries is reported. The gel polymer electrolyte exhibits high ionic conductivity, excellent electrochemical stability, thermal resistance, and mechanical robustness, making it a promising candidate for potassium battery applications.

SUSTAINABLE MATERIALS AND TECHNOLOGIES (2022)

Add to Collection

Article Chemistry, Physical

Incorporating highly dispersed alumina in PEO-based solid electrolytes by vapor phase infiltration for all-solid-state lithium metal batteries

Yue Zhang et al.

Summary: Solid-state lithium-metal batteries with composite polymer electrolytes have great potential. By using a vapor phase infiltration (VPI) approach, the volume and interface properties of powdery poly(ethylene oxide) can be modified simultaneously with highly dispersed alumina. This method is beneficial for improving the performance of the battery in both the lithium metal anode and cathode.

MATERIALS TODAY ENERGY (2022)

Add to Collection

Article Electrochemistry

UV-cured self-healing gel polymer electrolyte toward safer room temperature lithium metal batteries

Simone Siccardi et al.

Summary: This work proposes a UV-induced, solvent-free radical copolymerization method for improving the performance of solid polymer electrolytes. The resulting polymers demonstrate high thermal stability, good lithium-ion conductivity, wide electrochemical window, and self-healing properties. Additionally, the polymers exhibit excellent stability for lithium plating and stripping.

ELECTROCHIMICA ACTA (2022)

Add to Collection

Article Chemistry, Multidisciplinary

All-Solid-State Lithium Metal Batteries with Sulfide Electrolytes: Understanding Interfacial Ion and Electron Transport

Changhong Wang et al.

Summary: All-solid-state lithium metal batteries have gained attention for high energy density and safety. Sulfide electrolytes show high ionic conductivity but face challenges in commercialization. Strategies to improve interfacial charge transfer kinetics at cathode and anode interfaces are being explored to overcome these challenges.

ACCOUNTS OF MATERIALS RESEARCH (2022)

Add to Collection

Article Chemistry, Physical

PEO based polymer in plastic crystal electrolytes for room temperature high-voltage lithium metal batteries

Yulong Liu et al.

Summary: A novel type of poly(ethylene oxide) based polymer in plastic crystal electrolyte was designed to achieve stable cathode/electrolyte and anode/electrolyte interfaces simultaneously through strong intermolecular interactions. The Li-Li symmetric cells with the polymer in plastic crystal electrolyte exhibited stable operation for 700 hours at 1 mA cm(-2) and delivered a high discharge capacity of 169 mA h g(-1) with a capacity retention of 80% after 120 cycles, even at a high cut-off voltage of 4.4 V. This work highlights the development of PEO-based electrolytes with higher energy density through intermolecular design.

NANO ENERGY (2021)

Add to Collection

Article Engineering, Environmental

Composite polymer electrolytes with uniform distribution of ionic liquid-grafted ZIF-90 nanofillers for high-performance solid-state Li batteries

Zhiwen Lei et al.

Summary: A novel nanofiller ZIF90-g-IL was reported in this study, achieving uniform distribution of fillers in high-performance solid polymer electrolytes through strong interaction with PEO. The composite SPE exhibited higher ionic conductivity, wider electrochemical stability window, and stronger ability to inhibit lithium dendrite growth.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

Vapor phase infiltration of ZnO quantum dots for all-solid-state PEO-based lithium batteries

Wenda Bao et al.

Summary: CSPEs have long been considered promising for all-solid-state lithium batteries due to easy fabrication and low cost, but weak polymer-filler interactions and filler agglomeration limit their performance. ZnO quantum dots chemically incorporated into the PEO matrix have shown to enhance Li+ conduction and decrease interfacial resistance with Li metal, potentially serving as a model for high-performance lithium batteries with strong polymer-filler interactions introduced by VPI.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Low-Cost Gel Polymer Electrolyte for High-Performance Aluminum-Ion Batteries

Zhidong Liu et al.

Summary: A gel polymer electrolyte was prepared using a low-cost AlCl3/Et3NHCl ionic liquid and polyamide through a simple process, achieving decent performance for aluminum-ion battery applications.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Review Chemistry, Physical

The critical role of inorganic nanofillers in solid polymer composite electrolyte for Li+ transportation

Zhichuan Shen et al.

Summary: Compared to commercial lithium batteries with liquid electrolytes, all-solid-state lithium batteries (ASSLBs) offer higher safety, better electrochemical stability, higher energy density, and longer cycle life. The design and fabrication of solid-state electrolytes (SSEs) are crucial for the future commercialization of ASSLBs. Solid polymer composite electrolytes (SPCEs) consisting of inorganic nanofillers and polymer matrix show great application prospects in ASSLBs.

CARBON ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Stable Seamless Interfaces and Rapid Ionic Conductivity of Ca-CeO2/LiTFSI/PEO Composite Electrolyte for High-Rate and High-Voltage All-Solid-State Battery

Hao Chen et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Exploring porous (zeolitic imidazolate frame work-8) ZIF-8 as an efficient filler for high-performance poly(ethyleneoxide)-based solid polymer electrolytes

Zhiwen Lei et al.

NANO RESEARCH (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Polymer Electrolytes for Lithium-Based Batteries: Advances and Prospects

Dong Zhou et al.

CHEM (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Poly(ethylene oxide)-Li10SnP2S12 Composite Polymer Electrolyte Enables High-Performance All-Solid-State Lithium Sulfur Battery

Xue Li et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Practical Challenges and Future Perspectives of All-Solid-State Lithium-Metal Batteries

Shuixin Xia et al.

CHEM (2019)

Add to Collection

Article Chemistry, Physical

A dopamine modified Li6.4La3Zr1.4Ta0.6O12/PEO solid-state electrolyte: enhanced thermal and electrochemical properties

Zeya Huang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Physical

Parameters optimization for synthesis of Al-doped ZnO nanoparticles by laser ablation in water

Niksa Krstulovic et al.

APPLIED SURFACE SCIENCE (2018)

Add to Collection

Review Polymer Science

Beyond PEO-Alternative host materials for Li+-conducting solid polymer electrolytes

Jonas Mindemark et al.

PROGRESS IN POLYMER SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

Crosslinked Poly(tetrahydrofuran) as a Loosely Coordinating Polymer Electrolyte

David G. Mackanic et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

A durable and safe solid-state lithium battery with a hybrid electrolyte membrane

Wenqiang Zhang et al.

NANO ENERGY (2018)

Add to Collection

Article Chemistry, Physical

Engineering the surface of LiCoO2 electrodes using atomic layer deposition for stable high-voltage lithium ion batteries

Jin Xie et al.

NANO RESEARCH (2017)

Add to Collection

Review Chemistry, Physical

Recent advances in all-solid-state rechargeable lithium batteries

Chunwen Sun et al.

NANO ENERGY (2017)

Add to Collection

Review Nanoscience & Nanotechnology

Lithium battery chemistries enabled by solid-state electrolytes

Arumugam Manthiram et al.

NATURE REVIEWS MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Atomic Layer Deposition of Stable LiAlF4 Lithium Ion Conductive Interfacial Layer for Stable Cathode Cycling

Jin Xie et al.

ACS NANO (2017)

Add to Collection

Article Nanoscience & Nanotechnology

A Superior Polymer Electrolyte with Rigid Cyclic Carbonate Backbone for Rechargeable Lithium Ion Batteries

Jingchao Chai et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

High Ionic Conductivity of Composite Solid Polymer Electrolyte via In Situ Synthesis of Monodispersed SiO2 Nanospheres in Poly(ethylene oxide)

Dingchang Lin et al.

NANO LETTERS (2016)

Add to Collection

Article Chemistry, Physical

A new solid polymer electrolyte incorporating Li10GeP2S12 into a polyethylene oxide matrix for all-solid-state lithium batteries

Yanran Zhao et al.

JOURNAL OF POWER SOURCES (2016)

Add to Collection

Editorial Material Energy & Fuels

A solid future for battery development

Juergen Janek et al.

NATURE ENERGY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Morphology controlled synthesis of Al doped ZnO nanosheets on Al alloy substrate by low-temperature solution growth method

Venkateswarlu Gaddam et al.

RSC ADVANCES (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Atomic layer deposition of solid-state electrolyte coated cathode materials with superior high-voltage cycling behavior for lithium ion battery application

Xifei Li et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection

Article Electrochemistry

Nanocomposites of Titanium Dioxide and Polystyrene-Poly(ethylene oxide) Block Copolymer as Solid-State Electrolytes for Lithium Metal Batteries

Inna Gurevitch et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Add to Collection

Article Chemistry, Physical

Quantitative in situ infrared analysis of reactions between trimethylaluminum and polymers during Al2O3 atomic layer deposition

Bo Gong et al.

JOURNAL OF MATERIALS CHEMISTRY (2012)

Add to Collection

Article Chemistry, Physical

Effect of nano-silica filler in polymer electrolyte on Li dendrite formation in Li/poly(ethylene oxide)-Li(CF3SO2)2N/Li

S. Liu et al.

JOURNAL OF POWER SOURCES (2010)

Add to Collection

Article Chemistry, Physical

Conductivity studies on ceramic Li1.3Al0.3Ti1.7(PO4)3-filled PEO-based solid composite polymer electrolytes

Yan-Jie Wang et al.

JOURNAL OF POWER SOURCES (2006)

Add to Collection

Article Electrochemistry

Superacid ZrO2-added, composite polymer electrolytes with improved transport properties

F Croce et al.

ELECTROCHEMISTRY COMMUNICATIONS (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.