☆ 3.9 Article

Features of the exponential form of internal heat generation, Cattaneo-Christov heat theory on water-based graphene-CNT-titanium ternary hybrid nanofluid flow

HEAT TRANSFER (2023)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

Hydromagnetic flow and thermal interpretations of Cross hybrid nanofluid influenced by linear, nonlinear and quadratic thermal radiations for any Prandtl number

S. Shaw et al.

Summary: The steady hydromagnetic flow and heat transfer behavior of non-Newtonian (Cross) hybrid nanofluid with water as base fluid and SWCNT, and MWCNT as nanoparticles past a stretched cylinder has been analyzed. The contributory outcomes of the present investigation include upgraded Weissenberg and curvature parameters intensify the fluid motion and rate of heat transportation while that of magnetic field strength controls the motion.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2022)

Add to Collection

Article Engineering, Mechanical

Aspects of magnetic dipole and heat source/sink on the Maxwell hybrid nanofluid flow over a stretching sheet

B. Saleh et al.

Summary: The influence of magnetic dipole on the flow of a Maxwell hybrid nanoliquid over a stretching sheet with a non-uniform heat source/sink is examined in this study. The effects of non-dimensional parameters on the fluid profiles are explained graphically, showing that the radial velocity increases with higher Maxwell parameter values and decreases with higher ferromagnetic interaction parameter values. The rising values of space and temperature dependent heat source/sink parameters improve the heat transfer.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2022)

Add to Collection

Article Chemistry, Physical

Dynamics of ternary-hybrid nanofluid subject to magnetic flux density and heat source or sink on a convectively heated surface

I. L. Animasaun et al.

Summary: The size and intensity of the system of delocalized electrons are reflected in the form of the induced magnetic field. However, the significance of different-shaped metal nanoparticles in stagnant water undergoing convective heating is still unclear. Numerical calculations and analysis reveal that an increase in convective heating of the wall can enhance temperature distribution, regardless of whether it is a heat source or heat sink.

SURFACES AND INTERFACES (2022)

Add to Collection

Article Mechanics

MHD Darcy-Forchheimer Cu-Ag/H2O-C2H6O2 hybrid nanofluid flow via a porous stretching sheet with suction/blowing and viscous dissipation

Navneet Joshi et al.

Summary: This article explores the combined impact of thermal radiation and suction/blowing on the MHD flow of Cu-Ag/H2O-C2H6O2 hybrid nanofluid through a stretchable surface in Darcy-Forchheimer porous medium. The study finds that velocity decreases with suction, while the absence of suction/injection region is observed. Moreover, in the blowing region, a dual behavior in velocity profiles is noticed with an increase in Forchhiemer and porosity parameters.

INTERNATIONAL JOURNAL FOR COMPUTATIONAL METHODS IN ENGINEERING SCIENCE & MECHANICS (2022)

Add to Collection

Article Thermodynamics

Thermophoretic particle deposition and heat generation analysis of Newtonian nanofluid flow through magnetized Riga plate

Javali K. Madhukesh et al.

Summary: The Riga surface consists of an electromagnetic actuator with a discontinuous electrode array and a permanent magnet mounted on a planar surface. The study investigates a two-dimensional nanofluid flow with heat sink-source, thermophoretic depositions, and Newtonian heating. The effects of different nondimensional factors on various physical quantities are discussed graphically.

HEAT TRANSFER (2022)

Add to Collection

Article Physics, Multidisciplinary

Bio-convection effects on Williamson nanofluid flow with exponential heat source and motile microorganism over a stretching sheet

Aziz Ullah Awan et al.

Summary: This article examines the impact of bio-convection on Williamson nanofluid flow, including nonlinear thermal radiation and chemical reaction effects. The study finds that nanofluids have significant potential for enhancing heat transfer.

CHINESE JOURNAL OF PHYSICS (2022)

Add to Collection

Article Chemistry, Physical

Insight into the motion of water conveying three kinds of nanoparticles shapes on a horizontal surface: Significance of thermo-migration and Brownian motion

S. Saleem et al.

Summary: This study analyzes the dynamics of water colloidal mixtures with three different types of nanoparticles. The results show that increasing the density of spherical nanoparticles decreases friction and accumulation of species, but increases the mass transfer rate near the wall. Additionally, increased thermo-migration of nanoparticles decreases the Nusselt number, while increased Brownian motion decreases heat transfer and temperature distribution but increases mass transfer.

SURFACES AND INTERFACES (2022)

Add to Collection

Article Thermodynamics

Cattaneo-Christov heat flux model for nanofluid flow over a curved stretching sheet: An application of Stefan blowing

Rangaswamy Naveen Kumar et al.

Summary: This study investigates the thermophoresis and Brownian motion effects in nanofluid flow over a curved stretching sheet (CSS), and considers the Cattaneo-Christov heat flux and Stefan blowing (SB) conditions for studying heat and mass transport characteristics. The coupled partial differential equations are transformed into ordinary differential equations using suitable similarity variables and numerically solved using the Runge-Kutta-Fehlberg method. The effects of the involved parameters on the flow, mass, and heat fields are discussed using suitable graphs.

HEAT TRANSFER (2022)

Add to Collection

Article Physics, Multidisciplinary

Thermophoresis and Brownian motion effects on 3D flow of Casson nanofluid consisting microorganisms over a Riga plate using PSO: A numerical study

Himanshu Upreti et al.

Summary: This research work analyzes the heat and mass transfer nature of 3D flow of Casson nanofluid with gyrotactic microorganisms over a Riga plate, considering modified magnetic field, thermophoresis, and Brownian motion. The study solves the equations for flow, energy, diffusion, and microorganisms using a numerical integration scheme and PSO Particle Swarm Optimization. The results show how the temperature, velocities, concentration, and gyrotactic microorganisms of Casson nanofluid vary with different parameters.

CHINESE JOURNAL OF PHYSICS (2022)

Add to Collection

Article Physics, Multidisciplinary

Heat and mass transfer analysis of radiative fluid flow under the influence of uniform horizontal magnetic field and thermophoretic particle deposition

B. C. Prasannakumara et al.

Summary: This study examines the effect of thermophoretic particle deposition on liquid flow across a rotating disk using a horizontal magnetic field to regularize the flow field. The energy equation when exposed to thermal radiation is also investigated. Numerical solutions show that an increase in magnetic parameter decreases both axial and radial velocity profiles, while an increase in thermophoretic parameters and coefficient reduces mass transport.

WAVES IN RANDOM AND COMPLEX MEDIA (2022)

Add to Collection

Article Physics, Multidisciplinary

Assessment of the local thermal non-equilibrium condition for nanofluid flow through porous media: a comparative analysis

B. C. Prasannakumara

Summary: The study investigates the impact of nanoparticles in base fluids using the Tiwari-Das model. Numerical simulations of nanoliquid flow over a stretching sheet in a porous medium reveal significant variations in thermal transfer between fluid and solid phases under different parameter conditions. The porosity parameter strongly influences the velocity of NaAlg-Cu nanoliquid.

INDIAN JOURNAL OF PHYSICS (2022)

Add to Collection

Article Physics, Multidisciplinary

Cattaneo-Christov double diffusion on micropolar magneto cross nanofluids with entropy generation

M. K. Nayak et al.

Summary: This study focuses on the two-dimensional unsteady incompressible flow of a micropolar cross nanofluid past a linear stretching/shrinking sheet with a magnetic field. By employing the shooting method, numerical solutions are obtained to analyze the influence of governing parameters on various fluid characteristics. It is found that an increase in micropolar parameter enhances flow velocity and micro-rotation, while decreasing fluid temperature, and irreversibility ratio increases with the stretching/shrinking strength parameter.

INDIAN JOURNAL OF PHYSICS (2022)

Add to Collection

Article Thermodynamics

On the hydrothermal features of radiative Fe3O4-graphene hybrid nanofluid flow over a slippery bended surface with heat source/sink

Nilankush Acharya et al.

Summary: The study compared the hydrothermal features of hybrid nanofluid and usual nanofluid on a bent structure, finding that the curvature factor reduces temperature while increasing velocity, and heat transfer is intensified for higher thermal Biot numbers.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Significance of Stefan Blowing and Convective Heat Transfer in Nanofluid Flow Over a Curved Stretching Sheet with Chemical Reaction

P. T. Manjunatha et al.

Summary: This study investigates fluid flow with Newtonian heating effect, discussing flow equations under Newtonian heating and Stefan blowing conditions. Results show that an increase in the Stefan blowing parameter leads to higher liquid velocity, while an increase in the chemical reaction rate parameter exacerbates concentration gradients.

JOURNAL OF NANOFLUIDS (2021)

Add to Collection

Article Thermodynamics

Mixed convective flow of Ag-H2O magnetic nanofluid over a curved surface with volumetric heat generation and temperature-dependent viscosity

Alok K. Pandey et al.

Summary: This study investigates the impact of magnetic nanofluid flow over a curved surface in the presence of heat and mass mixed convection, considering various parameters and analyzing the effects of heat and mass transfer.

HEAT TRANSFER (2021)

Add to Collection

Article

Computational Investigation of Stefan Blowing Effect on Flow of Second-Grade Fluid Over a Curved Stretching Sheet

R. J. Punith Gowda et al.

International Journal of Applied and Computational Mathematics (2021)

Add to Collection

Article Thermodynamics

Bioconvection of a Radiating Hybrid Nanofluid Past a Thin Needle in the Presence of Heterogeneous-Homogeneous Chemical Reaction

V Puneeth et al.

Summary: The photocatalytic nature of TiO2 and antibacterial characteristic of Ag make Ag - TiO2 widely applicable in medicinal field, engineering appliances, and industries. The study analyzes the effects of magnetic field, thermal radiation, and quartic autocatalysis in an electrically conducting Ag - TiO2 - H2O hybrid nanofluid, as well as the role of gyrotactic microorganisms in preventing aggregation and sedimentation of TiO2.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2021)

Add to Collection

Article Thermodynamics

Ohmic heating effects and entropy generation for nanofluidic system of Ree-Eyring fluid: Intelligent computing paradigm

Muhammad Shoaib et al.

Summary: In this study, the nano-material flow of Ree-Eyring fluid model (NF-REFM) was analyzed using TLM-BNNs, showing the effectiveness of this method in computing and validating flow performance. The effects of flow on velocity, temperature, and concentration under different parameters were investigated, and results regarding entropy generation, Bejan number, Nusselt number, Sherwood number, and skin friction coefficient were also discussed.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Heat Transfer and Second Law Analysis of Ethylene Glycol-Based Ternary Hybrid Nanofluid Under Laminar Flow

L. Syam Sundar et al.

Summary: The experimental results show that in reduced graphene oxide (rGO)-Fe3O4-TiO2 hybrid nanofluid, as the particle loading and Reynolds number increase, the heat transfer performance and exergy efficiency are enhanced, while the thermal conductivity and viscosity also increase.

JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS (2021)

Add to Collection

Article Mathematics, Interdisciplinary Applications

Computational modelling of nanofluid flow over a curved stretching sheet using Koo?Kleinstreuer and Li (KKL) correlation and modified Fourier heat flux model

R. J. Punith Gowda et al.

Summary: This paper investigates the two-dimensional incompressible nanofluid flow over a curved stretching sheet coiled in a circle, taking into account the dispersion of nanoparticles in water and their impact on flow performance. Mathematical models and numerical computations are used to analyze the effects of various parameters on the flow performance.

CHAOS SOLITONS & FRACTALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Modified Arrhenius and Thermal Radiation Effects on Three-Dimensional Magnetohydrodynamic Flow of Carbon Nanotubes Nanofluids Over Bi-Directional Stretchable Surface

Himanshu Upreti et al.

Summary: In this study, 3D hydro-magnetic flow of CNTs-EG/EO/H2O nanofluids over bi-directional stretchable surface was analyzed along with various factors. The study found that MWCNTs based nanofluids have a higher temperature gradient compared to SWCNTs based nanofluids, and engine oil-based nanofluids show the fastest rate of temperature distribution decline.

JOURNAL OF NANOFLUIDS (2021)

Add to Collection

Article

Convective Flow of Second Grade Fluid Over a Curved Stretching Sheet with Dufour and Soret Effects

R. J. Punith Gowda et al.

International Journal of Applied and Computational Mathematics (2021)

Add to Collection

Article Thermodynamics

Inspection of convective heat transfer and KKL correlation for simulation of nanofluid flow over a curved stretching sheet

R. Naveen Kumar et al.

Summary: The study focuses on the flow of nanofluid over a curved stretching sheet, discussing heat and mass transfer, activation energy, and the use of CuO with waterbased nanofluid in the model. By utilizing the Koo-Kleinstreuer-Li (KKL) model, the viscosity and effective thermal conductivity of the fluid suspended by nanoparticles are examined. The results reveal the impact of non-dimensional parameters on thermal gradient and mass transfer in the nanofluid flow.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Engineering, Mechanical

Physical insights into the heat and mass transfer in Casson hybrid nanofluid flow induced by a Riga plate with thermophoretic particle deposition

J. K. Madhukesh et al.

Summary: The study focuses on the laminar, steady flow of a Casson hybrid nanoliquid induced by a Riga plate in the presence of a porous medium. Numerical solutions are obtained using a fourth fifth-order Runge-Kutta-Fehlberg process, showing the influences of parameters on flow fields.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2021)

Add to Collection

Article Mathematics, Applied

Exploration of Arrhenius activation energy on hybrid nanofluid flow over a curved stretchable surface

R. S. Varun Kumar et al.

Summary: Heat transfer is crucial for the success of multi-scale production, with thermal properties achieved through continuous phase liquids. Increasing the values of Biot number and heat source/sink parameter can improve thermal gradient. Hybrid nanofluid demonstrates higher heat transfer rate compared to nanoliquid for improved values of heat source/sink parameter.

ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Magnetized flow of sutterby nanofluid through cattaneo-christov theory of heat diffusion and stefan blowing condition

R. J. Punith Gowda et al.

Summary: In this research, the Stefan blowing phenomenon in electrically conducting Sutterby material flow over a stretchable rotating disk is demonstrated. The CC model and Buongiorno model are adopted to analyze energy diffusion and evaluate the involvement of nanoparticles. The re-structured system of partial differential expressions is solved using RKF process to communicate the solution of velocity, thermal and solutal fields, with results showing the influence of Stefan blowing factor on velocity gradients and nanomaterial speed, as well as the impact of magnetic parameter values on liquid velocity and temperature.

APPLIED NANOSCIENCE (2021)

Add to Collection

Article Engineering, Multidisciplinary

The Impact of Cattaneo-Christov Double Diffusion on Oldroyd-B Fluid Flow over a Stretching Sheet with Thermophoretic Particle Deposition and Relaxation Chemical Reaction

Bheemasandra M. Shankaralingappa et al.

Summary: The study focuses on the characteristics of flow, heat, and mass transfer in non-Newtonian fluids. By considering various parameters, the research explores the impact on fluid velocity, concentration, and temperature profiles. The results show that changes in parameters have different effects on fluid properties.

INVENTIONS (2021)

Add to Collection

Article Multidisciplinary Sciences

Two-phase flow of dusty fluid with suspended hybrid nanoparticles over a stretching cylinder with modified Fourier heat flux

R. S. Varun Kumar et al.

Summary: This study examines the influence of hybrid nanoparticles on dusty liquid flow through a stretching cylinder using the modified Fourier heat flux law and a two-phase model. The results indicate that an increase in particle mass concentration leads to a decrease in velocity and thermal gradient, while an increase in the curvature parameter enhances velocity and thermal gradient within the boundary. The use of appropriate similarity variables allows for the numerical solution of the nonlinear ODEs through the Runge-Kutta-Fehlberg method.

SN APPLIED SCIENCES (2021)

Add to Collection

Article Thermodynamics

ASSESSMENT OF ENTROPY GENERATION AND HEAT TRANSFER IN THREE-DIMENSIONAL HYBRID NANOFLUIDS FLOW DUE TO CONVECTIVE SURFACE AND BASE FLUIDS

Himanshu Upreti et al.

Summary: This study investigates the entropy generation of hybrid nanofluids flow on a porous stretching surface under the influence of thermal radiation, viscous dissipation, and convective boundary conditions. The investigation reveals the patterns of velocities/temperature, Nusselt and Bejan numbers, and entropy generation in relation to various parameters, using the Xue model of thermal conductivity for nanofluids. The comparison of different hybrid nanofluids with thermal profiles shows that the CNT-engine oil hybrid nanofluid exhibits more significant behavior near the surface compared to other hybrid nanofluids.

JOURNAL OF POROUS MEDIA (2021)

Add to Collection

Article Thermodynamics

Thermal performance of Ag-water nanofluid flow over a curved surface due to chemical reaction using Buongiorno's model

Ashish Mishra et al.

Summary: This study conducts an analysis of heat and mass transfer over a curved surface under the influence of chemical reaction, friction heating, and heat generation/absorption, with the random motion attributes of nanoparticles and thermophoresis applied in the expressions of energy and concentration. Nonlinear partial differential equations are transformed to dimensionless ordinary differential equations, with numerical solutions obtained using a fourth-fifth order Runge-Kutta-Fehlberg method. The impacts of relevant parameters on velocity, temperature, and concentration are depicted, revealing relationships between concentration distribution of nanofluid and chemical reaction parameter, as well as the effects of thermophoresis, Brownian motion, and curvature parameters on temperature and velocity profiles.

HEAT TRANSFER (2021)

Add to Collection

Article Thermodynamics

Mixed convection flow of magnetic hybrid nanofluid over a bidirectional porous surface with internal heat generation and a higher-order chemical reaction

Navneet Joshi et al.

Summary: A numerical study was conducted on the flow of three-dimensional magnetic hybrid nanofluid (SWCNT + Ag-H2O) over a porous bidirectional stretchable surface, taking into account the physical effects of higher-order chemical reactions, internal heat generation, and mixed convection. The results showed that an increase in magnetic field and chemical reaction leads to an increase in mass transfer rate, while Nusselt number profiles decrease with an increase in the coefficient of volumetric heat generation values for both power index numbers n = 1 and 2.

HEAT TRANSFER (2021)

Add to Collection

Article Thermodynamics

Unsteady squeezing flow of magnetic hybrid nanofluids within parallel plates and entropy generation

Himanshu Upreti et al.

Summary: The study focuses on the significance of hybrid nanofluids in thermal applications, as well as the relationship between entropy generation and heat transfer. The volume fraction of carbon nanotubes and water-ethylene glycol mixtures affects the thermal conductivity of the fluid.

HEAT TRANSFER (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Thermophoresis and suction/injection roles on free convective MHD flow of Ag-kerosene oil nanofluid

Himanshu Upreti et al.

JOURNAL OF COMPUTATIONAL DESIGN AND ENGINEERING (2020)

Add to Collection

Article Thermodynamics

THERMODYNAMIC ANALYSIS OF HALL CURRENT AND SORET NUMBER EFFECT ON HYDROMAGNETIC COUETTE FLOW IN A ROTATING SYSTEM WITH A CONVECTIVE BOUNDARY CONDITION

M. Venkateswarlu et al.

HEAT TRANSFER RESEARCH (2020)

Add to Collection

Article Multidisciplinary Sciences

Ohmic Heating and Non-uniform Heat Source/Sink Roles on 3D Darcy-Forchheimer Flow of CNTs Nanofluids Over a Stretching Surface

Himanshu Upreti et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2020)

Add to Collection

Article Engineering, Mechanical

Mixed convection flow of Newtonian fluids over an upper horizontal thermally stratified melting surface of a paraboloid of revolution

I. L. Animasaun et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2019)

Add to Collection

Article Thermodynamics

Effects of temperature and particles volume concentration on the thermophysical properties and the rheological behavior of CuO/MgO/TiO2 aqueous ternary hybrid nanofluid: Experimental investigation

S. M. Mousavi et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Cross diffusion and exponential space dependent heat source impacts in radiated three-dimensional (3D) flow of Casson fluid by heated surface

Q. M. Zaigham Zia et al.

RESULTS IN PHYSICS (2018)

Add to Collection

Article Engineering, Multidisciplinary

MHD flow of Ag-water nanofluid over a flat porous plate with viscous-Ohmic dissipation, suction/injection and heat generation/absorption

Himanshu Upreti et al.

ALEXANDRIA ENGINEERING JOURNAL (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Numerical study for Darcy-Forchheimer flow due to a curved stretching surface with Cattaneo-Christov heat flux and homogeneous-heterogeneous reactions

Tasawar Hayat et al.

RESULTS IN PHYSICS (2017)

Add to Collection

Article Thermodynamics

MHD SLIP FLOW AND HEAT TRANSFER OVER AN EXPONENTIALLY STRETCHING PERMEABLE SHEET EMBEDDED IN A POROUS MEDIUM WITH HEAT SOURCE

P. R. Sharma et al.

FRONTIERS IN HEAT AND MASS TRANSFER (2017)

Add to Collection

Article Engineering, Aerospace

Magnetohydrodynamic Stagnation Point Flow and Heat Transfer of Casson Nanofluid Past a Stretching Sheet with Slip and Convective Boundary Condition

Wubshet Ibrahim et al.

JOURNAL OF AEROSPACE ENGINEERING (2016)

Add to Collection

Article Engineering, Multidisciplinary

Effect of viscous dissipation and suction/injection on MHD nanofluid flow over a wedge with porous medium and slip

Alok Kumar Pandey et al.

ALEXANDRIA ENGINEERING JOURNAL (2016)

Add to Collection

Article Thermodynamics

Heat transfer analysis for stretching flow over a curved surface with magnetic field

Z. Abbas et al.

JOURNAL OF ENGINEERING THERMOPHYSICS (2013)

Add to Collection

Article Physics, Multidisciplinary

Stretching a Curved Surface in a Viscous Fluid

M. Sajid et al.

CHINESE PHYSICS LETTERS (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.