☆ 4.0 Article

Implementation of Antibacterial Nanoparticles in Additive Manufacturing to Increase Part Strength and Stiffness

JOURNAL OF COMPOSITES SCIENCE (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Synthesis, Characterization, and Modeling of Aligned ZnO Nanowire-Enhanced Carbon-Fiber-Reinforced Composites

Jingyu Wang et al.

Summary: This paper presents the synthesis, characterization, and multiscale modeling of hybrid composites with enhanced interfacial properties consisting of aligned zinc oxide (ZnO) nanowires and continuous carbon fibers. Experimental results show that the nanowire-reinforced carbon fiber composites exhibit significant improvements in interfacial properties and mechanical performance.

MATERIALS (2022)

Add to Collection

Article Polymer Science

Funnel-Shaped Floating Vessel Oil Skimmer with Joule Heating Sorption Functionality

Blake Herren et al.

Summary: Floating vessel-type oil collecting devices based on sorbent materials offer potential solutions to oil spill cleanup, allowing efficient and continuous extraction of various oils from the water surface using a novel funnel-shaped sorbent and vessel design.

POLYMERS (2022)

Add to Collection

Article Multidisciplinary Sciences

Functionalization Enhancement on Interfacial Properties Between Graphene and ZnO NW/Epoxy: A Molecular Dynamics Simulation Study

Parisa Marashizadeh et al.

Summary: This study presents atomistic characterization of the interfacial properties of fiber matrix in hybrid functionalized carbon fiber reinforced polymer composites. By employing molecular dynamics simulation technique, the interfacial strength and cohesive energy of functionalized models are found to be significantly enhanced. The impact of carboxyl functional group on traction-separation response is the most significant. Comparing different structures, it is found that adding ZnO nanowire can compensate for the grafting effect. Combining the growth of ZnO nanowire and functionalization can greatly enhance the interfacial strength of carbon fiber composites in both opening and sliding modes.

ADVANCED THEORY AND SIMULATIONS (2022)

Add to Collection

Article Polymer Science

Experimental Characterization Framework for SLA Additive Manufacturing Materials

Jordi Martin-Montal et al.

Summary: Additive manufacturing (AM) has revolutionized the industry by allowing engineers and designers to optimize designs without long manufacturing times, but limitations in materials and mechanical properties of 3D printed parts hinder large-scale production. Experimental methodology framework proposed in this study aims to study materials printed by stereolithography (SLA) to broaden their use, while exploring the influence of different printing parameters on material behavior. Testing specimens were manufactured using Form 2 from Formlabs(R) with resin called Durable, providing insights for future research on other resins.

POLYMERS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Utilizing of (Zinc Oxide Nano-Spray) for Disinfection against SARS-CoV-2 and Testing Its Biological Effectiveness on Some Biochemical Parameters during (COVID-19 Pandemic)-ZnO Nanoparticles Have Antiviral Activity against (SARS-CoV-2)

Samy M. El-Megharbel et al.

Summary: The newly synthesized zinc oxide nanoparticles show high anti-SARS-CoV-2 activity but have some cytotoxic effects on the cell host. Further research is recommended to investigate complexes of other compounds with varying concentrations to reduce cellular toxicity and enhance antiviral activity against SARS-CoV-2.

COATINGS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Interfacial Properties of ZnO Nanowire-Enhanced Carbon Fiber Composites: A Molecular Dynamics Simulation Study

Parisa Marashizadeh et al.

Summary: The study investigated the interfacial properties of ZnO nanowire/carbon fiber-reinforced epoxy composites using MD simulations. Results showed that the addition of ZnO nanowires increased the interfacial strength and adhesion energy of the hybrid system.

LANGMUIR (2021)

Add to Collection

Article Chemistry, Physical

Effect of Post-Process Curing and Washing Time on Mechanical Properties of mSLA Printouts

Bartlomiej Nowacki et al.

Summary: The study explores the impact of post-processing on the mechanical properties of elements produced using mask stereolithography, showing that post-curing time strongly affects tensile and bending strength, and improves surface quality. Washing has an uncertain effect on strength, but extending washing time slightly reduces strength. Additionally, washing significantly impacts printout surface quality.

MATERIALS (2021)

Add to Collection

Article Polymer Science

Utilization of Antibacterial Nanoparticles in Photocurable Additive Manufacturing of Advanced Composites for Improved Public Health

Christopher Billings et al.

Summary: This study focuses on additive manufacturing and characterization of nanoparticle-reinforced photocurable resin-based nanocomposites with potential antimicrobial properties. By using digital light processing, these nanocomposites exhibit outstanding mechanical properties, surface quality, and water resistance capability, showing promise for long-term usage in improving public health.

POLYMERS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Nanoporous TiO2 spheres with tailored textural properties: Controllable synthesis, formation mechanism, and photochemical applications

Yong Ding et al.

PROGRESS IN MATERIALS SCIENCE (2020)

Add to Collection

Article Engineering, Multidisciplinary

Development of ultrastretchable and skin attachable nanocomposites for human motion monitoring via embedded 3D printing

Blake Herren et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Review Materials Science, Composites

The Use of Composite Materials in 3D Printing

Ignazio Blanco

JOURNAL OF COMPOSITES SCIENCE (2020)

Add to Collection

Review Nanoscience & Nanotechnology

A Review on Enhancing the Antibacterial Activity of ZnO: Mechanisms and Microscopic Investigation

Buzuayehu Abebe et al.

NANOSCALE RESEARCH LETTERS (2020)

Add to Collection

Review Engineering, Biomedical

Photo-curing 3D printing technique and its challenges

Haoyuan Quan et al.

BIOACTIVE MATERIALS (2020)

Add to Collection

Article Biophysics

Increased antibacterial activity of ZnO nanoparticles: Influence of size and surface modification

Bruna Lallo da Silva et al.

COLLOIDS AND SURFACES B-BIOINTERFACES (2019)

Add to Collection

Review Materials Science, Multidisciplinary

State-of-the-Art and Future Challenges of UV Curable Polymer-Based Smart Materials for Printing Technologies

Cristian Mendes-Felipe et al.

ADVANCED MATERIALS TECHNOLOGIES (2019)

Add to Collection

Article Chemistry, Physical

Synthesis and characterization of self-assembled ZnO nanoarrays on hybrid structural fibers

Wang Jingyu et al.

SURFACES AND INTERFACES (2019)

Add to Collection

Article Chemistry, Physical

Wear Resistance of 3D Printing Resin Material Opposing Zirconia and Metal Antagonists

Ji-Man Park et al.

MATERIALS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

3D Printing of Highly Stretchable Strain Sensors Based on Carbon Nanotube Nanocomposites

Mohammad Abshirini et al.

ADVANCED ENGINEERING MATERIALS (2018)

Add to Collection

Review Environmental Sciences

Magnetically separable nanocomposites based on ZnO and their applications in photocatalytic processes: A review

Maryam Shekofteh-Gohari et al.

CRITICAL REVIEWS IN ENVIRONMENTAL SCIENCE AND TECHNOLOGY (2018)

Add to Collection

Review Chemistry, Physical

Review on the improvement of the photocatalytic and antibacterial activities of ZnO

Kezhen Qi et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Review Mechanics

A review on additive manufacturing of polymer-fiber composites

Pedram Parandoush et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Review Nanoscience & Nanotechnology

Review on Zinc Oxide Nanoparticles: Antibacterial Activity and Toxicity Mechanism

Amna Sirelkhatim et al.

NANO-MICRO LETTERS (2015)

Add to Collection

Review Nanoscience & Nanotechnology

Review on Zinc Oxide Nanoparticles: Antibacterial Activity and Toxicity Mechanism

Amna Sirelkhatim et al.

NANO-MICRO LETTERS (2015)

Add to Collection

Review Chemistry, Applied

Synthesis, antibacterial activity, antibacterial mechanism and food applications of ZnO nanoparticles: a review

Lu-E Shi et al.

FOOD ADDITIVES AND CONTAMINANTS PART A-CHEMISTRY ANALYSIS CONTROL EXPOSURE & RISK ASSESSMENT (2014)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of particle size on the UV absorbance of zinc oxide nanoparticles

E. G. Goh et al.

SCRIPTA MATERIALIA (2014)

Add to Collection

Article Gastroenterology & Hepatology

Burden of Gastrointestinal Disease in the United States: 2012 Update

Anne F. Peery et al.

GASTROENTEROLOGY (2012)

Add to Collection

Article Nanoscience & Nanotechnology

Wettability Control of ZnO Nanoparticles for Universal Applications

Mikyung Lee et al.

ACS APPLIED MATERIALS & INTERFACES (2011)

Add to Collection

Article Thermodynamics

Effect of ZnO nanoparticles on the thermal and mechanical properties of epoxy-based nanocomposite

B. Ramezanzadeh et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2011)

Add to Collection

Article Chemistry, Multidisciplinary

Size-Dependent Bacterial Growth Inhibition and Mechanism of Antibacterial Activity of Zinc Oxide Nanoparticles

Krishna R. Raghupathi et al.

LANGMUIR (2011)

Add to Collection

Article Chemistry, Multidisciplinary

Increased Interface Strength in Carbon Fiber Composites through a ZnO Nanowire Interphase

Yirong Lin et al.

ADVANCED FUNCTIONAL MATERIALS (2009)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Influence of particle size on the antibacterial activity of zinc oxide

O Yamamoto

INTERNATIONAL JOURNAL OF INORGANIC MATERIALS (2001)

Add to Collection

Article Chemistry, Physical

Photoinduced surface wettability conversion of ZnO and TiO2 thin films

RD Sun et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.