4.1 Article

Fe-based amorphous coating for high-temperature wear, marine and low pH environments

Related references

Note: Only part of the references are listed.
Article Materials Science, Multidisciplinary

Fe-based metallic glass composite coatings by HVOF spraying: Influence of Mo on phase evolution, wear and corrosion resistance

Sapan K. Nayak et al.

Summary: Fe-based metallic glass composite coatings with added minor amount of Mo exhibited improved wear and corrosion resistance due to the increase in amorphous content and incorporation of Mo, which resulted in higher hardness and enhanced passivation ability of the coatings.

MATERIALS CHARACTERIZATION (2022)

Article Materials Science, Coatings & Films

Corrosion of high-velocity-oxygen-fuel (HVOF) sprayed non-crystalline alloy coating in marine environment

Hung-Bin Lee et al.

Summary: Amorphous Fe alloy coating was prepared on SUS316 substrate using HVOF spraying process, showing high hardness but micro-voids and micro-cracks. XRD and TEM confirmed the presence of amorphous and nano-crystalline phases in the coating. Corrosion tests revealed better resistance in neutral solutions and significant increase in corrosion current in seawater with higher over-potentials, attributed to oxidation of Mo and Cr elements in the Fe alloy.

SURFACE & COATINGS TECHNOLOGY (2021)

Article Materials Science, Multidisciplinary

A non-equiatomic FeNiCoCr high-entropy alloy with excellent anti-corrosion performance and strength-ductility synergy

Pengfei Wu et al.

Summary: The newly developed non-equiatomic Fe40Ni20Co20Cr20 (at.%) high-entropy alloy (HEA) shows excellent strength-ductility synergy, improved corrosion resistance, and higher electrochemical corrosion resistance compared to other alloys. The stability of the passive film in the alloy is attributed to the interaction between Co and other elements, leading to the formation of Co(Fe,Cr)2O4.

CORROSION SCIENCE (2021)

Article Chemistry, Physical

The study of mechanical properties and corrosion behavior of the Fe-based amorphous alloy coatings using high velocity oxygen fuel spraying

Tzu-Jing Lin et al.

Summary: The Fe-based amorphous alloy powders were sprayed on stainless steel substrates, and the microstructure, hardness, corrosion behavior, and stability of the coatings were analyzed through various tests. The coatings showed a transition behavior of activation, passivation, and over passivation under sea water and NaCl solution, with good corrosion resistance and stability observed over time.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Materials Science, Ceramics

Corrosion behaviour of plasma sprayed Fe based metallic glass (Fe73Cr2Si11B11C3 (at%) coatings in 3.5% NaCl solution

Pavan Bijalwan et al.

Summary: The Fe-based composite coatings deposited by atmospheric plasma spraying showed better corrosion resistance compared to the steel substrate, regardless of the coating thickness. The coating with a thickness of 110 +/- 12 μm exhibited the best corrosion resistance, attributed to optimal content of amorphous, porosity, and surface roughness.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2021)

Article Engineering, Mechanical

Performance of wear resistant MCrAlY coatings with oxide dispersion strengthening

Giovanni Bolelli et al.

Article Materials Science, Coatings & Films

Microstructure and wear behavior of FeCoNiCrMn high entropy alloy coating deposited by plasma spraying

Jin-Kun Xiao et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Article Materials Science, Multidisciplinary

Microstructure, corrosion-resistance, and wear-resistance properties of subsonic flame sprayed amorphous Fe-Mo-Cr-Co coating with extremely high amorphous rate

Chaorun Si et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Article Materials Science, Multidisciplinary

Corrosion and Wear Resistance of Fe-Based Amorphous Coatings

Guang Li et al.

COATINGS (2020)

Article Materials Science, Coatings & Films

Characterization and elevated-temperature tribological performance of AC-HVAF-sprayed Fe-based amorphous coating

Dandan Liang et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Article Materials Science, Multidisciplinary

The Corrosion Resistance Mechanism of Fe-Based Amorphous Coatings Synthesised by Detonation Gun Spraying

Weichao Ning et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)

Article Engineering, Mechanical

TiC-NiCr thermal spray coatings as an alternative to WC-CoCr and Cr3C2-NiCr

Giovanni Bolelli et al.

Article Materials Science, Ceramics

Effects of structural relaxation and crystallization on the corrosion resistance of an Fe-based amorphous coating

Yonghai Kang et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2020)

Article Materials Science, Coatings & Films

Corrosion Behavior of FeCrMoCBY Amorphous Coating Fabricated by High-Velocity Air Fuel Spraying

Fei Huang et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2019)

Article Electrochemistry

Localized corrosion behavior of a single-phase non-equimolar high entropy alloy

Tianshu Li et al.

ELECTROCHIMICA ACTA (2019)

Article Materials Science, Coatings & Films

Wear and corrosion resistant performance of thermal-sprayed Fe-based amorphous coatings: A review

Bo Huang et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Article Materials Science, Multidisciplinary

Effects of temperature on the tribological behavior of Al0.25CoCrFeNi high-entropy alloy

L. M. Du et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

Article Metallurgy & Metallurgical Engineering

Synergistic Effect of Mo, W, Mn and Cr on the Passivation Behavior of a Fe-Based Amorphous Alloy Coating

Wan-Ping Tian et al.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2018)

Article Materials Science, Multidisciplinary

Sliding Wear Behavior of Spark-Plasma-Sintered Fe-Based Amorphous Alloy Coatings on Cu-Ni Alloy

Himabindu Kasturi et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)

Article Chemistry, Physical

Microstructure and corrosion behavior of Fe-based amorphous coating prepared by HVOF

Jifu Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Article Materials Science, Coatings & Films

Passivation Behavior of Fe-Based Amorphous Coatings Prepared by High-Velocity Air/Oxygen Fuel Processes

H. R. Ma et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2017)

Article Nanoscience & Nanotechnology

Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting

H. Attar et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Article Materials Science, Multidisciplinary

Thermal Conductivity and Wear Behavior of HVOF-Sprayed Fe-Based Amorphous Coatings

Haihua Yao et al.

COATINGS (2017)

Review Materials Science, Ceramics

Corrosion resistance of Fe-Cr-based amorphous alloys: An overview

C. A. C. Souza et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2016)

Article Materials Science, Multidisciplinary

Fe-based amorphous coating for corrosion protection of magnesium alloy

S. F. Guo et al.

MATERIALS & DESIGN (2016)

Article Materials Science, Multidisciplinary

Selective laser melting of Zr-based bulk metallic glasses: Processing, microstructure and mechanical properties

X. P. Li et al.

MATERIALS & DESIGN (2016)

Article Materials Science, Multidisciplinary

Micro and nano indentation studies on Zr60Cu10Al15Ni15 bulk metallic glass

S. Vincent et al.

MATERIALS & DESIGN (2015)

Article Materials Science, Multidisciplinary

Fe-based amorphous coatings: Structures and properties

Lin Liu et al.

THIN SOLID FILMS (2014)

Article Materials Science, Multidisciplinary

Effects of crystallization on the corrosion resistance of Fe-based amorphous coatings

Y. Yang et al.

CORROSION SCIENCE (2012)

Article Materials Science, Multidisciplinary

Electrochemical behaviour of Fe-based metallic glasses in acidic and neutral solutions

Y. Wang et al.

CORROSION SCIENCE (2012)

Article Chemistry, Physical

Corrosion behaviour of crystalline and amorphous forms of the glass forming alloy Fe43Cr16Mo16C15B10

M. S. Bakare et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2012)

Article Materials Science, Multidisciplinary

Corrosion behaviors of coatings fabricated using bulk metallic glass powders with the composition of Fe68.5C7.1Si3.3B5.5P8.7Cr2.3Mo2.5Al2.0

S. L. Wang et al.

METALS AND MATERIALS INTERNATIONAL (2012)

Article Materials Science, Multidisciplinary

Indentation size effect in nanohardness

Yu. V. Milman et al.

ACTA MATERIALIA (2011)

Article Chemistry, Physical

What we have learned from studies on chemical properties of amorphous alloys?

Koji Hashimoto

APPLIED SURFACE SCIENCE (2011)

Article Materials Science, Multidisciplinary

Study of structure and corrosion resistance of Fe-based amorphous coatings prepared by HVAF and HVOF

R. Q. Guo et al.

CORROSION SCIENCE (2011)

Article Nanoscience & Nanotechnology

Indentation size effect in bulk metallic glass

Jae-il Jang et al.

SCRIPTA MATERIALIA (2011)

Article Materials Science, Coatings & Films

Structural and Thermal Behavior of Fe-Cr-Mo-P-B-C-Si Amorphous and Nanocrystalline HVOF Coatings

B. Movahedi et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2010)

Article Materials Science, Coatings & Films

Microstructure and Wear Resistance of Fe-Based Amorphous Metallic Coatings Prepared by HVOF Thermal Spraying

Z. Zhou et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2010)

Article Materials Science, Coatings & Films

Influence of hardness and roughness on the tribological performance of TiC/a-C nanocomposite coatings

K. P. Shaha et al.

SURFACE & COATINGS TECHNOLOGY (2010)

Article Materials Science, Multidisciplinary

Iron-Based Amorphous Metals: High-Performance Corrosion-Resistant Material Development

Joseph Farmer et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)

Article Materials Science, Coatings & Films

Formation and corrosion behavior of Fe-based amorphous metallic coatings by HVOF thermal spraying

Z. Zhou et al.

SURFACE & COATINGS TECHNOLOGY (2009)

Article Nanoscience & Nanotechnology

Recent progress in bulk glassy, nanoquasicrystalline and nanocrystalline alloys

A Inoue et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

Review Materials Science, Multidisciplinary

Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology

WC Oliver et al.

JOURNAL OF MATERIALS RESEARCH (2004)

Article Materials Science, Ceramics

Microhardness and abrasive wear resistance of metallic glasses and nanostructured composite materials

T Gloriant

JOURNAL OF NON-CRYSTALLINE SOLIDS (2003)

Article Materials Science, Multidisciplinary

A nanoindentation study of serrated flow in bulk metallic glasses

CA Schuh et al.

ACTA MATERIALIA (2003)