☆ 4.7 Article

Norbornene-based acid-base blended polymer membranes with low ion exchange capacity for proton exchange membrane fuel cell

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Chemical

Influence of mass ratio and calcination temperature on physical and photoelectrochemical properties of ZnFe-layered double oxide/cobalt oxide heterojunction semiconductor for dye degradation applications

Yufei Zhang et al.

Summary: ZnFe-layered double oxide (LDO)/cobalt(II,III) oxide (Co3O4) composites were prepared by calcining Co loaded ZnFe-LDO obtained through hydrothermal and microwave hydrothermal methods. The composites exhibited a flower-like structure composed of Co(3)O(4) nanowires and ZnFe-LDO nanosheets. The ZnFe-LDO/Co3O4 composite showed a high degradation efficiency of 93.3% for methylene blue (MB) under visible light and 1.0 V voltage after 3 hours, indicating its potential for organic pollutant removal.

PARTICUOLOGY (2023)

Add to Collection

Article Chemistry, Physical

Proton exchange membranes containing densely alkyl sulfide sulfonated side chains for vanadium redox flow battery

Shiju Cai et al.

Summary: A series of poly(aryl ether sulfone)s containing eight alkyl sulfide sulfonated side chains were designed and synthesized to improve the performance of aromatic sulfonated proton exchange membrane in vanadium redox flow battery. These membranes showed excellent ionic conductivity, moderate water uptake, and good dimensional stability.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Add to Collection

Article Engineering, Chemical

New high-performance bulky N-heterocyclic group functionalized poly (terphenyl piperidinium) membranes for HT-PEMFC applications

Yaping Jin et al.

Summary: A novel high-performance high-temperature proton exchange membrane has been developed with high phosphoric acid doping content and conductivity, achieving good performance in fuel cells.

JOURNAL OF MEMBRANE SCIENCE (2022)

Add to Collection

Article Polymer Science

Recent Advancements in Polysulfone Based Membranes for Fuel Cell (PEMFCs, DMFCs and AMFCs) Applications: A Critical Review

Rajangam Vinodh et al.

Summary: This review presents the recent development of polysulfone-based electrolyte membranes and their composites for fuel cell applications. The influence of fillers on the performance of electrolyte membranes is discussed, along with the key issues of enhancing ionic conductivity and chemical stability. The future research directions for polymer electrolyte membranes are also briefly summarized.

POLYMERS (2022)

Add to Collection

Article Biochemistry & Molecular Biology

A Critical Review on the Use of Ionic Liquids in Proton Exchange Membrane Fuel Cells

Adnan Alashkar et al.

Summary: This paper provides a comprehensive review on the incorporation of ionic liquids (ILs) into polymer blends and their utilization as proton exchange membranes (PEM). It discusses various conventional polymers that incorporate ILs and presents the methods of synthesis of IL/polymer composite membranes. The paper concludes that the presence of certain ILs can increase the conductivity of the PEM and enhance the performance of PEMFCs, but highlights the challenges of leakage and limited long-term thermal and mechanical stability.

MEMBRANES (2022)

Add to Collection

Article Chemistry, Physical

AZ91 alloy nanocomposites reinforced with Mg-coated graphene: Phases distribution, interfacial microstructure, and property analysis

Zhanyong Zhao et al.

Summary: A new organic chemical reduction method was used to synthesize magnesium-coated graphene (GNPs) and fabricate nanocomposites with different contents. The microstructure of the composite was mainly composed of the matrix and the precipitated phase with different morphologies. With the increase of GNPs content, the grain and structure are refined, leading to improved hardness, reduced friction coefficient, and enhanced wear resistance.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis and characterization of 2,5-furandicarboxylic acid poly(butanediol sebacate-butanediol) terephthalate (PBSeT) segment copolyesters with excellent water vapor barrier and good mechanical properties

Yu Feng et al.

Summary: Aliphatic-aromatic copolyesters were synthesized from sebacic acid, terephthalic acid, 1,4-butanediol, and 2,5-furandicarboxylic acid, and the addition of 2,5-furandicarboxylic acid improved the tensile strength, yield strength, and water vapor barrier of the copolyesters. Copolyesters with 6% of 2,5-furandicarboxylic acid showed the best comprehensive performance.

JOURNAL OF MATERIALS SCIENCE (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Vertically Aligned Silicon Carbide Nanowires/ Boron Nitride Cellulose Aerogel Networks Enhanced Thermal Conductivity and Electromagnetic Absorbing of Epoxy Composites

Duo Pan et al.

Summary: A cellulose aerogel with highly enhanced thermal conductivity was successfully obtained by constructing a vertically aligned silicon carbide nanowires/boron nitride network. The composite exhibited significantly increased thermal conductivity compared to pure epoxy, both in vertical and horizontal directions. Additionally, it showed good electrical insulation and excellent electromagnetic wave absorption performance.

NANO-MICRO LETTERS (2022)

Add to Collection

Article Biochemistry & Molecular Biology

SPEEK and SPPO Blended Membranes for Proton Exchange Membrane Fuel Cells

Muhammad Imran Khan et al.

Summary: This study designed a series of blended membranes for fuel cell applications by adjusting the amounts of SPEEK and SPPO. The synthesized membranes showed homogeneous structures and exhibited high ion exchange capacity and proton conductivity. These membranes are suitable for proton exchange membrane fuel cell (PEMFC) applications.

MEMBRANES (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Tunable negative dielectric properties of magnetic CoFe2O4/graphite-polypyrrole metacomposites

Jiang Guo et al.

Summary: In this study, CoFe2O4/graphite-polypyrrole (PPy) metacomposites with negative dielectric constant were successfully prepared using the surface-initiated-polymerization method. The negative dielectric constant was regulated by changing the content of CoFe2O4/graphite. The crystal structure, chemical structure, and microstructure of the samples were characterized, and the magnetic properties were reported. This work provides guidance for the fabrication of polymer-based metacomposites with tunable negative dielectric constant.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Add to Collection

Review Nanoscience & Nanotechnology

Oxidative degradation of phenols and substituted phenols in the water and atmosphere: a review

Jianfei Sun et al.

Summary: Phenols, as a class of toxic compounds, pose potential risks to the environment and human beings due to their difficulty in biodegradation. This paper reviews the environmental degradation of phenols and substituted phenols in water and air, and summarizes the methods and mechanisms for their treatment in wastewater and atmospheric degradation.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Three-dimensional printing of the copper sulfate hybrid composites for supercapacitor electrodes with ultra-high areal and volumetric capacitances

Yanliang Zhao et al.

Summary: The preparation of electrodes with high areal and volumetric capacitance is crucial for the practical use of supercapacitors. In this study, researchers used additive manufacturing technology to prepare electrodes with a special conductive cross-linking structure. These electrodes exhibited excellent capacitance performance and retention.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Add to Collection

Review Nanoscience & Nanotechnology

Waterborne polyurethane and its nanocomposites: a mini-review for anti-corrosion coating, flame retardancy, and biomedical applications

Jianchen Cai et al.

Summary: Waterborne polyurethanes (WPU) are environmentally friendly alternatives to solvent-borne polyurethanes. The properties of WPU can be tailored by choosing different monomers and monomer ratios. This mini-review discusses the synthesis of WPU, the influence of materials on their properties, and strategies to improve their performance. The structure-property relationship for their end-use applications is also emphasized.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Hybrid proton exchange membrane used in fuel cell with amino-functionalized metal-organic framework in sulfonated polyimide to construct efficient ion transport channel

Jie Yang et al.

Summary: This paper focuses on the preparation and fuel cell application of an organic-inorganic composite membrane. By introducing metal-organic framework as filler, the composite membrane shows enhanced peak stress intensity and proton conductivity, which can be attributed to the unique structure of the filler and the synergistic effect of amino modification.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Add to Collection

Article Chemistry, Applied

Waterborne acrylic resin co-modified by itaconic acid and γ-methacryloxypropyl triisopropoxidesilane for improved mechanical properties, thermal stability, and corrosion resistance

Zhuanghua Yu et al.

Summary: Waterborne acrylic resin modified with both IA and KH571 was successfully synthesized by seeded emulsion polymerization. The addition of IA and KH571 greatly improved the water resistance and other properties of the resin coating, making it a potential candidate for waterproof and anticorrosive coatings.

PROGRESS IN ORGANIC COATINGS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Flame-retardant and leakage-proof phase change composites based on MXene/polyimide aerogels toward solar thermal energy harvesting

Yan Cao et al.

Summary: In this study, innovative leakage-proof phase change composites (PCCs) with excellent solar thermal conversion capability and superior flame retardancy were successfully developed. The PCCs showed high PEG loading capacity and enthalpy, and exhibited outstanding flame retardant properties.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

?Several birds with one stone? strategy of pH/thermoresponsive flame-retardant/photothermal bactericidal oil-absorbing material for recovering complex spilled oil

Ya Chen et al.

Summary: This study proposed an ingenious design strategy to prepare pH/thermoresponsive flame-retardant/photothermal bactericidal foams, addressing the challenges of treating oil spills and oily wastewater. The foams were effective in recovering spilled viscous crude oil, separating bacteria-containing oily emulsions, extinguishing fires, and providing fire alarms.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Highly transmitted silver nanowires-SWCNTs conductive flexible film by nested density structure and aluminum-doped zinc oxide capping layer for flexible amorphous silicon solar cells

Shunliang Gao et al.

Summary: This study developed a novel architecture of composite transparent conductive films (TCFs) by fabricating silver nanowires-SWCNTs films using ultrasonic spraying technology and capping it with aluminum-doped zinc oxide (AZO) for enhanced optical properties. The optimized ASA bilayer structure demonstrated superior optoelectronic performance and potential to replace traditional ITO.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Engineering, Chemical

In-situ constructing visible light CdS/Cd-MOF photocatalyst with enhanced photodegradation of methylene blue

Cheng Jing et al.

Summary: The CdS/Cd-MOF nanocomposites show efficient photocatalytic performance due to their larger specific surface area providing more active sites and the broadening of the light response range by CdS loading. The formed type-II heterojunction between Cd-MOF and CdS effectively inhibits the recombination of photogenerated electrons and holes, leading to improved photocatalytic activity.

PARTICUOLOGY (2022)

Add to Collection

Article Electrochemistry

Excellent ion selectivity of Nafion membrane modified by PBI via acid-base pair effect for vanadium flow battery

Yingying Zhao et al.

Summary: By introducing PBI functional groups to reinforce Nafion membrane, Nafion/PBI membrane is prepared to improve ion selectivity and optimize battery performance.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Engineering, Chemical

Chemically stable anion exchange membranes based on C2-Protected imidazolium cations for vanadium flow battery

Yi Xing et al.

Summary: By designing different C2-substituted imidazolium structures, it is possible to improve the electrochemical properties and VFB performance of anion exchange membranes. The introduction of bulky C2-phenyl substituted benzimidazolium led to distinct microphase separation in the membrane, reducing water uptake and enhancing vanadium selectivity and conductivity.

JOURNAL OF MEMBRANE SCIENCE (2021)

Add to Collection

Article Engineering, Chemical

Novel sulfonated polyimide membrane blended with flexible poly[bis(4-methylphenoxy) phosphazene] chains for all vanadium redox flow battery

Miaomiao Zhang et al.

Summary: The introduction of PMPP has significantly improved the stability and performance of the SPI membrane, enhancing anti-hydrolysis and anti-oxidation stability, maintaining high proton conductivity and low vanadium ion permeability, and improving membrane mechanical properties through a rigidity-flexibility network. The SPI/2% PMPP membrane also shows higher CE, VE, and EE than the N212 membrane at a high current density, with reduced battery capacity loss and high temperature resistance, indicating potential applications in fuel cells.

JOURNAL OF MEMBRANE SCIENCE (2021)

Add to Collection

Article Engineering, Environmental

Novel ether-free sulfonated poly(biphenyl) tethered with tertiary amine groups as highly stable amphoteric ionic exchange membranes for vanadium redox flow battery

Jianfeng Xu et al.

Summary: The development of a novel ether-free amphoteric ionic exchange membrane with long alkyl chains and zwitterionic groups shows high stability, low swelling ratio, and excellent proton conductivity. Compared to Nafion212 membrane, the optimized TA15-SPBP membrane exhibits higher ion selectivity and better electrical efficiencies.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Chemical

Hybrid proton exchange membrane of sulfonated poly(ether ether ketone) containing polydopamine-coated carbon nanotubes loaded phosphotungstic acid for vanadium redox flow battery

Yuxia Zhang et al.

Summary: The hybrid membrane of Sulfonated Poly(ether ether ketone)/Polydopamine-coated Carbon Nanotubes loaded Phosphotungstic Acid (S/DCNTs-HPW) shows high ion selectivity and excellent charge capacity retention, making it a potential alternative for Proton Exchange Membranes in Vanadium Redox Flow Battery systems.

JOURNAL OF MEMBRANE SCIENCE (2021)

Add to Collection

Article Engineering, Chemical

Bi-functional side chain architecture tuned amphoteric ion exchange membranes for high-performance vanadium redox flow batteries

Lei Liu et al.

Summary: The novel amphoteric ion exchange membranes prepared through a unique polymerization method exhibit high ion conductivity and chemical stability. The introduction of hydrophobic spacers in the membrane structure enhances proton transport efficiency and mechanical stability. The membranes show high energy efficiency and stability in vanadium redox flow batteries, outperforming Nafion 212.

JOURNAL OF MEMBRANE SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Revisiting Nafion membranes by introducing ammoniated polymer with norbornene to improve fuel cell performance

Lei Liu et al.

Summary: Nafion/APNB membranes were prepared by introducing APNB architecture, increasing hydrophobic domains, and forming ordered water channels to improve ion conductivity; Nafion/APNB-2.5% membrane has the highest swelling ratio, while Nafion/APNB-5% membrane has the highest power density.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Review Electrochemistry

Review-Recent Membranes for Vanadium Redox Flow Batteries

Baye Gueye Thiam et al.

Summary: The vanadium redox flow battery (VRFB) is a promising electrochemical system, with a key component being the membrane that separates the positive and negative half-cells. High-performance, low-cost membranes are crucial for reducing overall system costs, with current research focused on developing membranes with high ionic conductivity, low permeability to vanadium ions, and good chemical and mechanical stability.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Add to Collection

Article Polymer Science

Substituted polynorbornene membranes: a modular template for targeted gas separations

Xinyi Wang et al.

Summary: Polynorbornenes are ideal for systematic structure-property investigations related to gas transport, with recent focus shifting towards the development of highly selective materials for multiple targeted gas separations. Advances have been made in the preparation of stable and highly selective polynorbornenes for membrane-based gas separations since 2017.

POLYMER CHEMISTRY (2021)

Add to Collection

Review Materials Science, Characterization & Testing

Recent developments in sol-gel based polymer electrolyte membranes for vanadium redox flow batteries - A review

Jaganathan Balaji et al.

POLYMER TESTING (2020)

Add to Collection

Review Polymer Science

Recent Progress in the Development of Composite Membranes Based on Polybenzimidazole for High Temperature Proton Exchange Membrane (PEM) Fuel Cell Applications

Jorge Escorihuela et al.

POLYMERS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

A Review on Sulfonated Polymer Composite/Organic-Inorganic Hybrid Membranes to Address Methanol Barrier Issue for Methanol Fuel Cells

Duraibabu Dhanapal et al.

NANOMATERIALS (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Carbon Nanocomposite Membrane Electrolytes for Direct Methanol Fuel Cells-A Concise Review

Gutru Rambabu et al.

NANOMATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Highly Conducting Anion-Exchange Membranes Based on Cross-Linked Poly(norbornene): Ring Opening Metathesis Polymerization

Wanting Chen et al.

ACS APPLIED ENERGY MATERIALS (2019)

Add to Collection

Article Engineering, Chemical

Crosslinked norbornene copolymer anion exchange membrane for fuel cells

Chao Wang et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

Preparation and properties of ion exchange membranes for PEMFC with sulfonic and carboxylic acid groups based on polynorbornenes

Chao Wang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Add to Collection

Review Chemistry, Physical

Sulfonated poly(arylene ether sulfone) nanocomposite electrolyte membrane for fuel cell applications: A review

Harshad Lade et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Add to Collection

Article Chemistry, Physical

Synthesis and properties of reprocessable sulfonated polyimides cross-linked via acid stimulation for use as proton exchange membranes

Boping Zhang et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection

Article Chemistry, Physical

Molecular dynamics simulation study of a polynorbornene-based polymer: A prediction of proton exchange membrane design and performance

Xue Li et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

Add to Collection

Review Chemistry, Multidisciplinary

A review of polymer-nanocomposite electrolyte membranes for fuel cell application

Deuk Ju Kim et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2015)

Add to Collection

Article Engineering, Chemical

Preparation and properties of the cross-linked sulfonated polyimide containing benzimidazole as electrolyte membranes in fuel cells

Haiyan Pan et al.

JOURNAL OF MEMBRANE SCIENCE (2015)

Add to Collection

Review Chemistry, Applied

Functionalization of polymeric materials as a high performance membrane for direct methanol fuel cell: A review

N. Awang et al.

REACTIVE & FUNCTIONAL POLYMERS (2015)

Add to Collection

Article Polymer Science

Novel proton exchange membrane for fuel cell developed from blends of polybenzimidazole with fluorinated polymer

Mousumi Hazarika et al.

EUROPEAN POLYMER JOURNAL (2013)

Add to Collection

Article Polymer Science

The Use of an Emulsion Templated Microcellular Poly(dicyclopentadiene-co-norbornene) Membrane as a Separator in Lithium-Ion Batteries

Sebastijan Kovacic et al.

MACROMOLECULAR RAPID COMMUNICATIONS (2013)

Add to Collection

Article Chemistry, Physical

Review of the proton exchange membranes for fuel cell applications

S. J. Peighambardoust et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)

Add to Collection

Review Polymer Science

Progress in ionic organic-inorganic composite membranes for fuel cell applications

R. K. Nagarale et al.

POLYMER CHEMISTRY (2010)

Add to Collection

Article Chemistry, Inorganic & Nuclear

The effect of fluorine atoms on gas transport properties of new polynorbornene dicarboximides

Joel Vargas et al.

JOURNAL OF FLUORINE CHEMISTRY (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.