Related references
Note: Only part of the references are listed.Microstructural evolution and mechanical properties of h-BN composite ceramics with Y2O3-AlN addition by liquid-phase sintering
Bao-Fu Qiu et al.
RARE METALS (2020)
Effects of nano ZrO2 content on the comprehensive properties of BN-SiC composites
Ning Liao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Role of h-BN content on microstructure and mechanical properties of hot-pressed ZrB2-SiC composites
Nasser Pourmohammadie Vafa et al.
CERAMICS INTERNATIONAL (2020)
Tuning the electrical, thermal, and mechanical properties of SiC-BN composites using sintering additives
Rohit Malik et al.
JOURNAL OF ASIAN CERAMIC SOCIETIES (2020)
Microstructure and room/elevated-temperature mechanical properties of hot-pressed h-BN composite ceramics with La2O3-Al2O3-SiO2 addition
Baofu Qiu et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
The effects of adding CNTs and GNPs on the microstructure and mechanical properties of hexagonal-boron nitride
Hossein Eslami-shahed et al.
CERAMICS INTERNATIONAL (2020)
The effect of temperature on the physical and mechanical properties of nanostructured boron nitride by spark plasma sintering
Marzieh Ehsani et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Anisotropies in structure and properties of hot-press sintered h-BN-MAS composite ceramics: Effects of raw h-BN particle size
Bo Niu et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Fabrication and properties of a high porosity h-BN-SiO2 ceramics fabricated by stereolithography-based 3D printing
Zhuo Tian et al.
MATERIALS LETTERS (2019)
The effect of boron oxide on the physical and mechanical properties of nanostructured boron nitride by spark plasma sintering
Marzieh Ehsani et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Enhanced mechanical properties, thermal shock resistance and ablation resistance of Si2BC3N ceramics with nano ZrB2 addition
Ning Liao et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Mechanical Properties of Al/BN Nanocomposites Fabricated by Planetary Ball Milling and Conventional Hot Extrusion
Reza Gostariani et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2018)
Effect of AlN and ZrO2 on the microstructure and property of the 2Si-B-3C-N ceramic
Pengfei Zhang et al.
CERAMICS INTERNATIONAL (2018)
Mechanical and thermal properties of h-BN based composite containing dual glass phases at elevated temperatures
Juanjuan Chen et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)
Effect of magnesium aluminum silicate glass on the thermal shock resistance of BN matrix composite ceramics
Delong Cai et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)
Low-temperature sintering behavior and mechanical properties of BN-ZrO2-SiC composites
Lei Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Mechanical, dielectric and thermal properties of porous boron nitride/silicon oxynitride ceramic composites prepared by pressureless sintering
Yangshan Sun et al.
CERAMICS INTERNATIONAL (2017)
Microstructure, mechanical properties and thermal shock behavior of h-BN-SiC ceramic composites prepared by spark plasma sintering
Fengrui Zhai et al.
CERAMICS INTERNATIONAL (2017)
Influence of sintering pressure on the crystallization and mechanical properties of BN-MAS composite ceramics
Delong Cai et al.
JOURNAL OF MATERIALS SCIENCE (2016)
Influence of hot-press sintering parameters on microstructures and mechanical properties of h-BN ceramics
Xiaoming Duan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Review on the properties of hexagonal boron nitride matrix composite ceramics
Xiaoming Duan et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)
Microstructure and Erosion Resistance of in-situ SiAlON Reinforced BN-SiO2 Composite Ceramics
Tian Zhuo et al.
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION (2016)
Effects of AlN on the densification and mechanical properties of pressureless-sintered SiC ceramics
Qisong Li et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2016)
Synthesis and porous h-BN 3D architectures for effective humidity and gas sensors
Chandkiram Gautam et al.
RSC ADVANCES (2016)
Effects of AlN on the densification and mechanical properties of pressureless-sintered SiC ceramics
Qisong Li et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2016)
High-temperature mechanical and thermal properties of h-BN/30 vol% Y2SiO5 composite
Xi Zhang et al.
CERAMICS INTERNATIONAL (2015)
Microstructure and mechanical properties of h-BN/Y2SiO5 composites
Xi Zhang et al.
CERAMICS INTERNATIONAL (2015)
Microstructure and mechanical properties of ZTA/BN machinable ceramics fabricated by reactive hot pressing
B. Zhong et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)
Enhanced electrical resistivity in SiC-BN composites with highly-active BN nanoparticles synthesized via chemical route
Yinsheng Li et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)
A novel BN-MAS system composite ceramics with greatly improved mechanical properties prepared by low temperature hot-pressing
Delong Cai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Physical and mechanical properties of hexagonal boron nitride ceramic fabricated by pressureless sintering without additive
T. B. Wang et al.
ADVANCES IN APPLIED CERAMICS (2015)
Effect of SiC content on mechanical properties and thermal shock resistance of BN-ZrO2-SiC composites
Lei Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Anisotropic mechanical properties and fracture mechanisms of textured h-BN composite ceramics
Xiaoming Duan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Flexural Strength and Dielectric Properties of in-situ Si3N4-SiO2-BN Composite Ceramics
Hyun Min Lee et al.
JOURNAL OF THE KOREAN CERAMIC SOCIETY (2014)
Effects of hexagonal boron nitride and sintering temperature on mechanical and tribological properties of SS316L/h-BN composites
S. Mahathanabodee et al.
MATERIALS & DESIGN (2013)
Machinable ZrB2-SiC-BN composites fabricated by reactive spark plasma sintering
Wen-Wen Wu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Effect of ZrO2 content on microstructure, mechanical properties and thermal shock resistance of (ZrB2+3Y-ZrO2)/BN composites
Lei Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Effect of sintering pressure on the texture of hot-press sintered hexagonal boron nitride composite ceramics
Xiaoming Duan et al.
SCRIPTA MATERIALIA (2013)
Mechanical properties and microstructure of porous BN-SiO2-Si3N4 composite ceramics
Na-Na Long et al.
CERAMICS INTERNATIONAL (2012)
Influence of β-Si3N4 particle size and heat treatment on microstructural evolution of α:β-SiAlON ceramics
N. Calis Acikbas et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2011)
Pressure-induced preferential grain growth, texture development and anisotropic properties of hot pressed hexagonal boron nitride ceramics
Jia-Xiang Xue et al.
SCRIPTA MATERIALIA (2011)
Mechanical Properties and Plasma Erosion Resistance of ZrO2p(3Y)/BN-SiO2 Ceramic Composites under Different Sintering Temperature
Yu Zhou et al.
3RD INTERNATIONAL CONGRESS ON CERAMICS (ICC3): ADVANCED ENGINEERING CERAMICS AND COMPOSITES (2011)
Effect of surface oxidation on thermal shock resistance of ZrB2-SiC-G composite
Ping Hu et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2010)
Atomic layers of hybridized boron nitride and graphene domains
Lijie Ci et al.
NATURE MATERIALS (2010)
Preparation and properties of machinable Si2N2O/BN composites
Qingfeng Tong et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2008)
Mechanical Properties and End-milling Characteristic of AIN-hBN Based Machinable Ceramics
Si-Young Beck et al.
JOURNAL OF THE KOREAN CERAMIC SOCIETY (2008)
Properties of hot-pressed of SiC/Si3N4 nanocomposites
Luo fa et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Pressureless sintering of hexagonal boron nitride powders
N. Ay et al.
NITRIDES AND OXYNITRIDES III (2007)
Thermodynamic assessment of the systems La2O3-Al2O3 and La2O3-Y2O3
O. Fabrichnaya et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2006)
Structure and high-temperature strength of composite materials based on boron nitride
L. R. Vishnyakov et al.
POWDER METALLURGY AND METAL CERAMICS (2006)
High-temperature properties of a silicon nitride/boron nitride nanocomposite
T Kusunose et al.
JOURNAL OF MATERIALS RESEARCH (2004)
The formation of sp3 bonding in compressed BN
Y Meng et al.
NATURE MATERIALS (2004)
Densification of plasma sprayed YSZ electrolytes by spark plasma sintering (SPS)
KA Khor et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2003)
Machinable Al2O3/BN composite ceramics with strong mechanical properties
YL Li et al.
MATERIALS RESEARCH BULLETIN (2002)
Development of ZrO2-ZrB2 composites
B Basu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2002)
Co-enhanced SiO2-BN ceramics for high-temperature dielectric applications
G Wen et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2000)
Sintering, consolidation, reaction and crystal growth by the spark plasma system (SPS)
M Omori
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)