4.7 Article

Janus Nanofiber Antibacterial Membrane for Switchable Separation of Oil/Water Emulsions

Related references

Note: Only part of the references are listed.
Article Engineering, Environmental

Fast-response, no-pretreatment, and robustness air-water/oil amphibious superhydrophilic-superoleophobic surface for oil/water separation and oil-repellent fabrics

Xiaochen Li et al.

Summary: Inspired by the Namib desert beetle, a method to construct surfaces with superhydrophilic-superoleophobic properties has been successfully developed. These surfaces exhibit excellent and stable performance under amphibious conditions and offer a new approach to oil-water separation and oil-repellent fabrics.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Engineering, Environmental

Constructing oxidized carbon spheres-based heterogeneous membrane with high surface energy for energy-free water purification

Jincui Gu et al.

Summary: This article reports a heterogeneous membrane for pressure-free water purification, which is optimized by modifying the oxidized carbon spheres (OCS) membrane to improve its hydrophilic and separation performance. The membrane demonstrates excellent screening performance without extra pressure and the separation throughput can be improved by regulating the temperature.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Nanoscience & Nanotechnology

Polyacrylonitrile Nanofibers Coated with Covalent Organic Frameworks for Oil/Water Separation

An Chen et al.

Summary: An effective strategy of preparing composite membranes for oil/water separation by combining covalent organic frameworks (COFs) with electrospun nanofibers is reported. The prepared nanofiber membranes have potential for separating water-in-oil mixtures with high efficiency, due to their hydrophobic and oleophilic properties.

ACS APPLIED NANO MATERIALS (2022)

Article Nanoscience & Nanotechnology

Strong Flexible Ceramic Nanofiber Membranes for Ultrafast Separation of Oil Pollutants

Ying Peng et al.

Summary: Super strong and highly flexible ceramic nanofiber membranes with hydrophobic properties were prepared and used for efficient oil-water separation. These membranes exhibited excellent adsorption capacity, high resilience, high temperature resistance, and flame retardancy, making them suitable for removing contaminants by squeezing and combustion. The ultrafast separation speed and recyclable nature of these membranes make them promising for oil-water separation applications.

ACS APPLIED NANO MATERIALS (2022)

Article Engineering, Environmental

Multifunctional CNTs-PAA/MIL101(Fe)@Pt Composite Membrane for High-throughput Oily Wastewater Remediation

Chaohui Liu et al.

Summary: This study successfully developed a composite membrane of CNTs-PAA/MIL101(Fe)@Pt with excellent separation performance and stability for purification of oily waste water and effective separation of oil-in-water emulsions, showing potential applications in practical oily wastewater treatment.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Nanoscience & Nanotechnology

Multifunctional Switchable Nanocoated Membranes for Efficient Integrated Purification of Oil/Water Emulsions

Kai Wang et al.

Summary: This study reports the successful growth of a hybrid zeolitic imidazolate framework-8 and zinc oxide nanorod material on a poly(vinylidene fluoride) membrane for rapid filtration of emulsified oily wastewater, exhibiting superior mechanical strength, reversible under-liquid dual superlyophobicity, photo-catalytic self-cleaning property, and effective alternate separation capacity towards both oil-in-water and water-in-oil emulsions with ultrahigh fluxes and efficiencies (>99%).

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Engineering, Chemical

In situ generated micro-bubbles enhanced membrane antifouling for separation of oil-in-water emulsion

Yang Wang et al.

Summary: A novel membrane antifouling method using in situ generated micro-bubbles for oil/water separation was proposed in this study, which combined membrane separation with catalytic reaction to reduce fouling. The in situ generated micro-bubbles significantly inhibited the surface deposition of rejected oils, leading to a remarkable reduction in membrane fouling.

JOURNAL OF MEMBRANE SCIENCE (2021)

Article Chemistry, Physical

Facile design of a stable and inorganic underwater superoleophobic copper mesh modified by self-assembly sodium silicate and aluminum oxide for oil/water separation with high flux

Huaijie Cao et al.

Summary: The research focused on preparing inorganic coatings on copper mesh through a layer-by-layer self-assembly process of sodium silicate and aluminum oxide powders, achieving efficient oil/water separation. The hierarchical and rough structures formed by electrodeposition enable underwater superoleophobic properties, along with high flux, good recyclability, and thermal stability.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Review Chemistry, Multidisciplinary

Advanced Switchable Molecules and Materials for Oil Recovery and Oily Waste Cleanup

Yi Lu et al.

Summary: The recent advances in switchable molecules/materials for oil recovery and oily waste cleanup are explored in this article. These materials with various switchable properties can be deployed into the most suitable applications according to process requirements.

ADVANCED SCIENCE (2021)

Article Nanoscience & Nanotechnology

Multifunctional TiO2-Based Superoleophobic/Superhydrophilic Coating for Oil-Water Separation and Oil Purification

Feiran Li et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Engineering, Chemical

Engineering Janus CNTs/OCS composite membrane at air/water interface for excellent dye molecules screening

Tianyu Chen et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Chemistry, Multidisciplinary

Egg Shell Powders-Coated Membrane for Surfactant-Stabilized Crude Oil-in-Water Emulsions Efficient Separation

Haijun Zhang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Article Chemistry, Multidisciplinary

Biomimetic and Superwettable Nanofibrous Skins for Highly Efficient Separation of Oil-in-Water Emulsions

Jianlong Ge et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Article Nanoscience & Nanotechnology

High-Flux Oil/Water Separation with Interfacial Capillary Effect in Switchable Superwetting Cu(OH)2@ZIF-8 Nanowire Membranes

Qianqian Li et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Nanoscience & Nanotechnology

Superhydrophobic Cellulose Nanofiber-Assembled Aerogels for Highly Efficient Water-in-Oil Emulsions Separation

Sukun Zhou et al.

ACS APPLIED NANO MATERIALS (2018)

Article Chemistry, Multidisciplinary

Cobweb-Inspired Superhydrophobic Multiscaled Gating Membrane with Embedded Network Structure for Robust Water-in-Oil Emulsion Separation

Xiangde Lin et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)

Review Chemistry, Multidisciplinary

Superwetting Porous Materials for Wastewater Treatment: from Immiscible Oil/Water Mixture to Emulsion Separation

Weifeng Zhang et al.

ADVANCED MATERIALS INTERFACES (2017)

Article Agricultural Engineering

Dissolved air flotation and centrifugation as methods for oil recovery from ruptured microalgal cells

Forough Ghasemi Naghdi et al.

BIORESOURCE TECHNOLOGY (2016)

Review Environmental Sciences

An overview of oil-water separation using gas flotation systems

Jayaprakash Saththasivam et al.

CHEMOSPHERE (2016)

Article Nanoscience & Nanotechnology

Janus Polymer/Carbon Nanotube Hybrid Membranes for Oil/Water Separation

Jincui Gu et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Article Acoustics

Factors influencing the ultrasonic separation of oil-in-water emulsions

LJ Stack et al.

ULTRASONICS SONOCHEMISTRY (2005)