☆ 4.5 Article

Overlaying performance and bonding mechanism of wood-based panels decorated by EVA film reinforced decorative wood veneer

WOOD MATERIAL SCIENCE & ENGINEERING (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Paper & Wood

An innovative approach to manufacturing flexible decorative wood veneer using EVA film as adhesive and reinforcing materials

X. I. N. H. A. O. ZHANG et al.

Summary: A simple and efficient approach to manufacturing flexible decorative wood veneer using EVA film as adhesive and reinforcing material was proposed. The EVA film reinforced decorative wood veneer showed improved flexibility and tensile strength compared to the original veneer. The EVA film also exhibited better adaptability to moisture content, and the surface bonding strength met the required standards for indoor use.

WOOD MATERIAL SCIENCE & ENGINEERING (2023)

Add to Collection

Article Environmental Sciences

Residential building materials: An important source of ambient formaldehyde in mainland China

Shaodan Huang et al.

Summary: The study found that formaldehyde from residential building materials in China is a significant source of ambient formaldehyde, especially in urban areas. This will help in more accurately assessing exposure to ambient formaldehyde and related pollutants, and in formulating policies to protect air quality and public health.

ENVIRONMENT INTERNATIONAL (2022)

Add to Collection

Article Agricultural Engineering

Dialdehyde starch reinforced polyacrylate-polyethylene glycol resin for impregnated decorative paper with improved toughness and ultra-low formaldehyde emission

Ru Liu et al.

Summary: By modifying MF with polyacrylate-PEG-DAS, a cross-linked structure was formed in the impregnated decorative paper interlayer, leading to improved surface bonding strength, abrasion resistance, and reduced formaldehyde emission.

INDUSTRIAL CROPS AND PRODUCTS (2022)

Add to Collection

Article Polymer Science

Research Progress of Wood-Based Panels Made of Thermoplastics as Wood Adhesives

Xianfeng Mo et al.

Summary: Thermoplastic adhesives can effectively solve the formaldehyde emission issue in the wood-based panel industry. Compared to conventional urea-formaldehyde resin-bonded panels, thermoplastic-bonded wood-based panels exhibit higher mechanical properties, better water resistance, and improved machinability.

POLYMERS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Toward interface optimization of transparent wood with wood color and texture by silane coupling agent

Jichun Zhou et al.

Summary: This experiment aimed to optimize the interface compatibility between wood templates and resin using silane coupling agent KH550, resulting in improved optical and mechanical properties of transparent wood with the color and texture of solid wood. The study showed that the use of KH550 significantly improved the overall interface compatibility between the wood template and resin, leading to increased light transmittance, tensile strength, and elongation at break, as well as reduced haze. Transparent wood also retained some of the texture of solid wood.

JOURNAL OF MATERIALS SCIENCE (2022)

Add to Collection

Article Engineering, Chemical

Composite waterborne polyurethane reinforced with silane modified lignin as an adhesive between polypropylene decorative films and wood-based panels

Liang Chang et al.

Summary: In this study, the surface bonding strength of polypropylene decorative films on wood-based panels was improved by using modified lignin-filled waterborne polyurethane composites as adhesives. The addition of different types of modifiers greatly enhanced the performance of the composites.

POLYMER ENGINEERING AND SCIENCE (2022)

Add to Collection

Article Polymer Science

Print base decorative paper with high-dimensional stability by chemical fiber modification: An experimental and analytical approach

Massimiliano Barletta et al.

Summary: The main structural component of wood fibers is cellulose, which interacts with water due to its high hydrophilicity. This interaction can weaken paper by breaking hydrogen bonds and altering its dimension and stability over time, especially for products like decorative paper. Chemical additives can improve paper's performance against water and water vapor uptake.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Add to Collection

Article Polymer Science

Warpage control method during surface forming process of plastic film-reinforced flexible decorative veneer

Xiaorui Peng et al.

Summary: A new method using concave and convex molds for hot pressing was proposed to effectively control warpage issues of PRPDSV and improve quality stability. Surface forming temperature and mold curvature radius are key factors that affect warpage of PRPDSV.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Interfacial bonding properties of the eco-friendly geopolymer-wood composites: influences of embedded wood depth, wood surface roughness, and moisture conditions

Hanzhou Ye et al.

Summary: Increasing the embedded depth of wood, sanding the wood surface, and controlling moisture conditions during curing process can enhance the interfacial bonding strength of geopolymer-wood composites, with a plateau reached when the embedded depth exceeds 25 mm. Curing under wet conditions contributes to higher interfacial bonding strength, and improving wood surface roughness through sanding can create stronger mechanical interlocking at the interface to enhance bonding strength.

JOURNAL OF MATERIALS SCIENCE (2021)

Add to Collection

Article Materials Science, Paper & Wood

Soy meal adhesive with high strength and water resistance via carboxymethylated wood fiber-induced crosslinking

Huiwen Pang et al.

Summary: This study developed a high-performance soy meal-based adhesive by using carboxymethylated wood fibers, which served as a multiple crosslinking core and effectively improved the bonding strength and water resistance of the adhesive. The modified adhesive showed excellent performance in tension tests, with a significantly higher water-resistant bonding strength compared to the unmodified adhesive, leading to 100% wood failure percentage in plywood bonding. This design offers a simple and sustainable strategy for developing high-performance soy meal-based adhesives.

CELLULOSE (2021)

Add to Collection

Review Environmental Sciences

Conversion and transformation of N species during pyrolysis of woodbased panels: A review

Deliang Xu et al.

Summary: Understanding the migration and conversion of nitrogen in wood-based panels during pyrolysis is crucial for transforming N-containing species into valuable products. This review summarizes methods for examining N evolution and analyzes the wood-adhesive interactions impact on pyrolysis. The distribution and evolution of N-containing species in gas, liquid, and char during WBPs pyrolysis are investigated in recent studies, with comparison between heating sources and proposing converting pathways for value-added chemicals and carbon materials.

ENVIRONMENTAL POLLUTION (2021)

Add to Collection

Review Polymer Science

Surface and interface modification of aramid fiber and its reinforcement for polymer composites: A review

Bo Zhang et al.

Summary: Aramid fiber is widely used in composites reinforcement due to its excellent properties, but its surface limits its applications. Surface modification methods have been conducted to improve the adhesion between fiber and matrix. This review summarizes the recent progress of different surface modification methods of aramid fiber and its reinforcement to polymers, discussing existing problems and future research prospects.

EUROPEAN POLYMER JOURNAL (2021)

Add to Collection

Editorial Material Forestry

Wood-Based Composites: Innovation towards a Sustainable Future

Roberto Zanuttini et al.

FORESTS (2021)

Add to Collection

Review Mechanics

Thermoplastic moulding of Wood-Polymer Composites (WPC): A review on physical and mechanical behaviour under hot-pressing technique

Daniel Friedrich

Summary: This review paper examines the mechanical and physical standards of Wood-Plastic Composite (WPC) materials, focusing on the feasibility of creating three-dimensional elements through thermoforming. Hypotheses on expected properties for different WPC formulations are presented, laying the groundwork for further experimental studies in the development of thermally formed WPCs for large-scale applications.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Forestry

Effects of laser parameters on the width of color change area of poplar wood surface during a single irradiation

Rongrong Li et al.

Summary: The laser surface treatment method is efficient for modifying wood properties like color, wettability, and surface roughness. By experimenting, it was found that laser power and focus plane position significantly influence the width of color change area (WCCA). A quadratic model was established to accurately predict WCCA under different laser parameter combinations.

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2021)

Add to Collection

Article Materials Science, Paper & Wood

Manufacturing and Interfacial Bonding Behavior of EVA Film Reinforced Flexible Decorative Veneer

Lu Fang et al.

WOOD AND FIBER SCIENCE (2021)

Add to Collection

Article Forestry

Study of the collapse and recovery of Eucalyptus urophydis during conventional kiln drying

Lin Yang et al.

Summary: This research investigates the collapse and recovery characteristics of Eucalyptus urophydis wood during drying, comparing continuous and cyclic drying methods. Results show that continuous drying has a faster rate and temperature has a significant impact on shrinkage. Despite decreasing collapse, cyclic drying is less effective, especially at high temperatures. Recovery time is influenced by temperature, with quicker recovery at high temperatures, and the effect of humidity during cyclic drying accelerates collapse recovery. Microscopic collapse trends are consistent with macroscopic measurements.

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2021)

Add to Collection

Article Engineering, Chemical

Research of polypropylene (PP) decorative board surface painting used for wood product decoration and the paint film adhesion improvement by plasma

Xiaorui Peng et al.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Forestry

Experimental analysis of the forming behavior of ash wood veneer with nonwoven backings

David Zerbst et al.

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Research on the composite curling characteristic of plastic film reinforced pliable veneer of teak

Xiaorui Peng et al.

MATERIALS LETTERS (2020)

Add to Collection

Article Materials Science, Coatings & Films

Surface functionalization of 3D printed structures: Aesthetic and antibiofouling properties

Jose D. Castro et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Clean plasma modification for recycling waste plastic bags: From improving interfacial adhesion with wood towards fabricating formaldehyde-free plywood

Xiaoyan Zhou et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Forestry

Fast atmospheric plasma treatment of LLDPE film for preparing formaldehyde emission-free plywood

Yizhong Cao et al.

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2020)

Add to Collection

Review Green & Sustainable Science & Technology

Current situation and key manufacturing considerations of green furniture in China: A review

Xianqing Xiong et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Functionality of Surface Mycelium Interfaces in Wood Bonding

Wenjing Sun et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Review Green & Sustainable Science & Technology

A review of environmental assessments of biobased against petrochemical adhesives

Anna Eisen et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Review Chemistry, Physical

Sustainable wood-based composites for microwave absorption and electromagnetic interference shielding

Ming Zhou et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Forestry

Plasma treatment of plastic film or decorative veneer and its effects on the peel strength and curling deformation of plastic film-reinforced pliable decorative sliced veneer (PR-RP-DSV)

Xiaorui Peng et al.

HOLZFORSCHUNG (2019)

Add to Collection

Article Engineering, Manufacturing

Copy paper as a source of reinforcement for biodegradable composites - Influence of fibre loading, processing method and layer arrangement - An overview

Nina Graupner et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Add to Collection

Article Engineering, Chemical

Decorated wood fiber/high density polyethylene composites with thermoplastic film as adhesives

Yinan Liu et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2019)

Add to Collection

Article Construction & Building Technology

Modifying wood veneer with silane coupling agent for decorating wood fiber/high-density polyethylene composite

Yinan Liu et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Interface Bonding Properties and Mechanism of Poplar Board-Veneered Wood Fiber/Polypropylene Composites with Chlorinated Polypropylene Films as an Intermediate Layer

Yinan Liu et al.

LANGMUIR (2019)

Add to Collection

Article Agricultural Engineering

Understanding the development of interfacial bonding within PLA/wood-based thermoplastic sandwich composites

Jan Luedtke et al.

INDUSTRIAL CROPS AND PRODUCTS (2019)

Add to Collection

Article Engineering, Chemical

Glue wood veneer to wood-fiber-high-density-polyethylene composite

Yanan Sun et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2019)

Add to Collection

Article Forestry

Photoresponsive wood-based composite fabricated by a simple drop-coating procedure

Yingying Li et al.

WOOD SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Effect of PVC film pretreatment on performance and lamination of wood-plastic composite plywood

Zhihui Li et al.

RSC ADVANCES (2019)

Add to Collection

Article Materials Science, Composites

Decorating wood flour/HDPE composites with wood veneers

Li-Min Guo et al.

POLYMER COMPOSITES (2018)

Add to Collection

Article Materials Science, Composites

Hot-pressing composite curling deformation characteristics of plastic film-reinforced pliable decorative sliced veneer

Xiaorui Peng et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

Add to Collection

Article Forestry

Properties of flat-pressed wood plastic composites as a function of particle size and mixing ratio

Khandkar-Siddikur Rahman et al.

JOURNAL OF WOOD SCIENCE (2018)

Add to Collection

Article Forestry

Effects of surface modification methods on mechanical and interfacial properties of high-density polyethylene-bonded wood veneer composites

Lu Fang et al.

JOURNAL OF WOOD SCIENCE (2017)

Add to Collection

Article Computer Science, Software Engineering

Coloring 3D Printed Surfaces by Thermoforming

Yizhong Zhang et al.

IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS (2017)

Add to Collection

Article Engineering, Chemical

Innovation in poly(vinyl acetate) water resistant D3 glues used in wood industry

Fabio Chiozza et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2016)

Add to Collection

Article Chemistry, Physical

Influence of silane surface modification of veneer on interfacial adhesion of wood-plastic plywood

Lu Fang et al.

APPLIED SURFACE SCIENCE (2014)

Add to Collection

Article Forestry

Preparation and characterization of wood-plastic plywood bonded with high density polyethylene film

Lu Fang et al.

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2013)

Add to Collection

Article Construction & Building Technology

Formaldehyde and VOC emissions at different manufacturing stages of wood-based panels

Zhongkai He et al.

BUILDING AND ENVIRONMENT (2012)

Add to Collection

Article Forestry

On the performance of a melamine-urea-formaldehyde resin for decorative paper coatings

Andreas Kandelbauer et al.

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2010)

Add to Collection

Article Forestry

On the warping behaviour of particleboards coated with melamine formaldehyde resin impregnated papers

Andreas Kandelbauer et al.

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.