4.7 Article

Experimental studies on premixed charge and reactivity-controlled compression ignition combustion modes using gasoline/diesel fuel combination

Journal

CASE STUDIES IN THERMAL ENGINEERING
Volume 39, Issue -, Pages -

Publisher

ELSEVIER
DOI: 10.1016/j.csite.2022.102467

Keywords

HCCI; RCCI; PCCI; Emissions; Efficiency; Diesel; Gasoline

Categories

Funding

  1. Deanship of Scientific Research at King Khalid University
  2. [R.G.P 2/235/43]

Ask authors/readers for more resources

Homogeneous charge compression ignition (HCCI) is a promising technology to reduce NOx and soot emissions in compression ignition (CI) engines, but lacks combustion control. Premixed charge compression ignition (PCCI) and reactivity-controlled compression ignition (RCCI) are techniques that use partial homogeneous charge to reduce emissions. PCCI regulates combustion by controlling injection timing, while RCCI uses a combination of low reactive and high reactive fuels for combustion control.
Homogeneous charge compression ignition (HCCI) is a promising technology to reduce NOx and soot emissions in compression ignition (CI) engines. However, this technology lacks combustion control to circumvent the knocking and misfire limitations. Premixed charge compression ignition (PCCI) and reactivity-controlled compression ignition (RCCI) are techniques that use partial homogeneous charge to reduce NOx and soot emissions. Here, combustion is regulated either by controlling the injection timing or fuel reactivity. PCCI uses a part of fuel as premixed to form a partially homogeneous charge and the rest as direct-injected. RCCI, on the other hand, uses a low reactive fuel (LRF) for port injection to form a partially homogeneous charge and a high reactive fuel (HRF) for direct injection. In this work, we studied PCCI and RCCI modes using commercially available fuels like diesel and gasoline, and we compared the results with diesel baseline oper-ation. Adding 40% (by weight) heated diesel port injection to normal diesel operation in PCCI mode at different loads showed a minimum reduction in NOx and smoke emissions by 15% and 6%, respectively, when compared with diesel baseline. This mode was found to be equally effi-cient with diesel baseline operation at low torque conditions. Similarly, adding 40% (by weight) of gasoline port injection to normal diesel operation in RCCI mode at different loads showed a minimum reduction in NOx and smoke emissions by 20% and 14%, respectively, when compared with diesel baseline. This mode was found to be equally efficient with diesel baseline operation at high torque conditions.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available