4.7 Article

Synergetic Effect of Isovalent- and Aliovalent-Ion Dual-Doping in the Vanadium Site of Na3V2(PO4)3 for Wide-Temperature Operating Sodium-Ion Batteries

Related references

Note: Only part of the references are listed.
Article Electrochemistry

Unveiling Zn substitution and carbon nanotubes enwrapping in Na3V2(PO4)3 with high performance for sodium ion batteries: Experimental and theoretical study

Tianyue Tong et al.

Summary: By doping Zn2+ ions and encapsulating carbon nanotubes, the conductivity and ion diffusion rate of Na3V2(PO4)(3) material have been significantly improved, making it a promising cathode material for sodium-ion batteries.

ELECTROCHIMICA ACTA (2022)

Article Chemistry, Physical

Mg2+ and Mn2+ bimetallic co-doped Na3V2(PO4)3 as advanced cathode for sodium-ion batteries

Xiao Liu et al.

Summary: The bimetallic doped Na3V2-x(Mg0.5Mn0.5)(x)(PO4)(3) material showed high initial discharge capacity, rate capability, and cycling performance, indicating that the Me2+ and Mn2+ co-doped strategy effectively enhances the electrochemical properties of Na3V2(PO4)(3) for high performance sodium-ion batteries.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Nanoscience & Nanotechnology

A superior Na3V2(PO4)3-based cathode enhanced by Nb-doping for high-performance sodium-ion battery

Xianhui Rao et al.

Summary: Na3V2(PO4)(3) with enhanced intrinsic electronic conductivity and Na+ mobility, as well as reduced charge-transfer resistance, is a promising cathode material for sodium-ion batteries. Nano-sized Na3V2-xNbx(PO4)(3)/C (x = 0, 0.05, 0.1, 0.2) materials with a core-shell structure were prepared via a sol-gel method. The optimized Na3V1.9Nb0.1(PO4)(3)/C material showed high specific capacity, superior rate-capability, and excellent long-term cycling stability.

APL MATERIALS (2022)

Article Chemistry, Physical

Construction of three-dimensional electronic interconnected Na3V2(PO4)3/C as cathode for sodium ion batteries

Cheng Cheng et al.

Summary: The study synthesized Na3V2(PO4)/C (NVP/C) composites with a 3D porous carbon skeleton structure via hydrothermal methods. The NVP/C exhibited advantages such as high voltage plateau, 3D ionic diffusion channel, thermal stability, and structural robustness, making it a promising candidate for energy storage applications. The NVP/C showed excellent performance and stability as a cathode material for sodium ion batteries.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Chemistry, Multidisciplinary

A sulfur-doped carbon-enhanced Na3V2(PO4)3 nanocomposite for sodium-ion storage

Zan Huang et al.

Summary: A sulfur-doped carbon-promoted Na3V2(PO4)3 (NVPO@SC) composite with enhanced electrical conductivity for sodium-ion storage has been successfully fabricated using a sol-gel route and solid-state reaction process. The introduced sulfur-doped carbon coating improves the electrical conductivity of NVPO electrode by acting as a conductive bridge between NVPO particles. The resulting NVPO@SC nanocomposite exhibits excellent sodium storage performance, making it a promising candidate for advanced electrodes in sodium-ion batteries.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2022)

Article Engineering, Environmental

Chromium doping into NASICON-structured Na3V2(PO4)3 cathode for high-power Na-ion batteries

Jun Lee et al.

Summary: In this study, a Na3V1.6Cr0.4(PO4)(3)/C (NVCrP@C) cathode was designed for high power density sodium-ion batteries by implanting Cr into the crystal structure of NVP and coating it with carbon. The substitution of Cr in the structure significantly enhanced the electrode's structural stability, while the thin carbon layer improved electrical conductivity, leading to excellent cycling stability and power capability of the NVCrP@C cathode.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Multidisciplinary

Design and Construction of 3D Porous Na3V2(PO4)3/C as High Performance Cathode for Sodium Ion Batteries

Baoxiu Hou et al.

Summary: This study demonstrates the construction of 3D sequential porous NVP/C as a cathode material for sodium ion batteries using a delicate approach involving a cheap carbon source, leading to high performance with increased specific capacities and cycling stability. Optimization of viscosity and addition of active sites contribute to the improved performance of NVP/C, which exhibits excellent potential for practical applications in sodium ion batteries.

CHEMICAL RESEARCH IN CHINESE UNIVERSITIES (2021)

Article Chemistry, Physical

Realizing efficient sodium storage property with NASICON-type Na2VTi(PO4)3 modified by nitrogen and sulfur dual-doped carbon layer for sodium ion batteries

Yulong Zhu et al.

Summary: The nitrogen and sulfur co-doped carbon layer coated Na2VTi(PO4)(3) nanocomposites exhibit superior electrochemical performance, showing high discharge capacity and capacity retention. This research may offer guidance for large-scale commercial production of energy storage devices.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Engineering, Electrical & Electronic

A study on high rate and high stable sodium vanadium phosphate electrode for sodium battery alongside air exposure treatment

K. Diwakar et al.

Summary: The study compared the cathode materials NVP synthesized via the sol-gel method with the material exposed in air for 10 days. It was found that the air-exposed sample exhibited lower specific capacity due to sluggish diffusion kinetics, while maintaining crystal structure and chemical valence state.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)

Article Chemistry, Multidisciplinary

Reuse, Recycle, and Regeneration of LiFePO4 Cathode from Spent Lithium-Ion Batteries for Rechargeable Lithium- and Sodium-Ion Batteries

Binitha Gangaja et al.

Summary: Rechargeable lithium-ion batteries dominate the energy storage market with a market value of $50 billion. The study demonstrates the possibility of reusing spent LiFePO4 cathodes for new lithium-ion batteries and investigating their use in sodium-ion storage.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Article Chemistry, Physical

Stabilizing fluorine to achieve high-voltage and ultra-stable Na3V2(PO4)2F3 cathode for sodium ion batteries

Liang Deng et al.

Summary: By stabilizing fluorine, the low-voltage plateau of Na3V2(PO4)(2)F-3 cathode has been eliminated, leading to an increase in operating voltage and improvement in structural stability and kinetics. As a result, Na3V2(PO4)(2)F-3 exhibits higher energy density, better rate capability, longer cycling performance, wide temperature adaptability, and strong competitiveness as a cathode for sodium ion batteries.

NANO ENERGY (2021)

Review Chemistry, Physical

Sodium and lithium incorporated cathode materials for energy storage applications-A focused review

Jeffin James Abraham et al.

Summary: The incorporation of lithium/sodium combined cathodes in lithium/sodium-ion batteries has been a topic of significant interest over the past decade, showing great potential for development and application. Research on these materials has focused on synthesis and electrochemical performance, summarizing the key mechanisms influencing their performance.

JOURNAL OF POWER SOURCES (2021)

Article Chemistry, Multidisciplinary

Oxygen Vacancy Engineering in Na3V2(PO4)3 for Boosting Sodium Storage Kinetics

Minxia Jiang et al.

Summary: The study demonstrates that oxygen vacancy engineering with Cu doping can enhance the Na-ion diffusion kinetics of Na3V2(PO4)(3) and improve its performance as a cathode material for sodium ion batteries. The introduction of Cu successfully replaces V sites, maintains charge balance, and promotes the generation of oxygen vacancies, leading to improved capacity retention and rate capability.

ADVANCED MATERIALS INTERFACES (2021)

Article Nanoscience & Nanotechnology

N/P-Dual-Doped Carbon-Coated Na3V2(PO4)2O2F Microspheres as a High-Performance Cathode Material for Sodium-Ion Batteries

Lu-Lu Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Nanoscience & Nanotechnology

Surface-Engineered Li4Ti5O12 Nanostructures for High-Power Li-Ion Batteries

Binitha Gangaja et al.

NANO-MICRO LETTERS (2020)

Article Engineering, Environmental

Enhanced sodium storage property of sodium vanadium phosphate via simultaneous carbon coating and Nb5+ doping

Xiaohong Liu et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Materials Science, Multidisciplinary

Substantial doping engineering in Na3V2-xFex(PO4)3 (0≤x≤0.15) as high-rate cathode for sodium-ion battery

Tian Wu et al.

MATERIALS & DESIGN (2020)

Article Chemistry, Physical

A solution synthesis of Na3V2(PO4)3 cathode for sodium storage by using CTAB additive

A. H. Salehi et al.

SOLID STATE IONICS (2020)

Review Chemistry, Multidisciplinary

Polyanion Sodium Vanadium Phosphate for Next Generation of Sodium-Ion Batteries-A Review

Gongxuan Chen et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Physical

K+ and Mg2+ co-doped bipolar Na3V2(PO4)3: An ultrafast electrode for symmetric sodium ion full cell

Amalendu Das et al.

JOURNAL OF POWER SOURCES (2020)

Review Chemistry, Physical

State-of-the-Art Electrode Materials for Sodium-Ion Batteries

Alain Mauger et al.

MATERIALS (2020)

Article Nanoscience & Nanotechnology

Triggering the Reversible Reaction of V3+/V4+/V5+ in Na3V2(PO4)3 by Cr3+ Substitution

Qianchen Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Review Chemistry, Physical

Exploration of Advanced Electrode Materials for Rechargeable Sodium-Ion Batteries

Yang Sun et al.

ADVANCED ENERGY MATERIALS (2019)

Article Chemistry, Physical

Porous Na3V2(PO4)3/C nanoplates for high-performance sodium storage

Xuemei Li et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)

Review Chemistry, Physical

Sodium-Ion Battery Materials and Electrochemical Properties Reviewed

Kudakwashe Chayambuka et al.

ADVANCED ENERGY MATERIALS (2018)

Article Nanoscience & Nanotechnology

A cost and resource analysis of sodium-ion batteries

Christoph Vaalma et al.

NATURE REVIEWS MATERIALS (2018)

Article Chemistry, Physical

Superior Na-ion storage achieved by Ti substitution in Na3V2(PO4)3

Yangyang Huang et al.

ENERGY STORAGE MATERIALS (2018)

Article Electrochemistry

Determination of sodium ion diffusion coefficients in sodium vanadium phosphate

Nils Boeckenfeld et al.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2014)

Article Engineering, Environmental

Chemical states in XPS and Raman analysis during removal of Cr(VI) from contaminated water by mixed maghemite-magnetite nanoparticles

Saidur Rahman Chowdhury et al.

JOURNAL OF HAZARDOUS MATERIALS (2012)

Article Chemistry, Physical

XAS and XPS studies on chromium-binding groups of biomaterial during Cr(VI) biosorption

Donghee Park et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2008)