☆ 4.7 Review

Research Progress on the Preparation of Flexible and Green Cellulose-Based Electrothermal Composites for Joule Heating Applications

ACS APPLIED ENERGY MATERIALS (2022)

Related references

Note: Only part of the references are listed.

Article Materials Science, Paper & Wood

Graphene wrapped wood-based phase change composite for efficient electro-thermal energy conversion and storage

Wei Huang et al.

Summary: The study introduced a graphene wrapped wood-based phase change composite with outstanding characteristics, such as large latent heat of fusion, high TD packing content, and good reliability. The composite efficiently stored energy through electro-thermal conversion, offering a sustainable strategy for preheating and heat preservation of electronic devices.

CELLULOSE (2022)

Add to Collection

Article Engineering, Chemical

Cellulose-Based Conductive Films with Superior Joule Heating Performance, Electromagnetic Shielding Efficiency, and High Stability by In Situ Welding to Construct a Segregated MWCNT Conductive Network

Hongchao Lu et al.

Summary: In this paper, eco-friendly and multifunctional cellulose/MWCNT composite films with superhigh Joule heating performance, outstanding electromagnetic interference shielding efficiency, high electrical conductivity, and good mechanical properties are developed using a simple paper-making process and an ionic liquid as the solvent of cellulose.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2022)

Add to Collection

Article Chemistry, Physical

Novel Ti3C2Tx MXene wrapped wood sponges for fast cleanup of crude oil spills by outstanding Joule heating and photothermal effect

Pei-Lin Wang et al.

Summary: The newly developed porous PDMS@WSM absorbent, demonstrated excellent compressibility and oil absorption ability, exhibited efficient oil adsorption within a short period of time. The absorbent showed good reusability and cycle stability, making it widely applicable in crude oil spill remediation and other environmental cleaning fields.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Materials Science, Textiles

Thermoelectrical properties of graphene knife-coated cellulosic fabrics for defect monitoring in Joule-heated textiles

Tamara Ruiz-Calleja et al.

Summary: This paper reports the fabrication of thermoelectrically conductive textiles through knife-coating of cellulosic fabrics with graphene nanoplatelets (GNP). The thermographic images obtained during the electrical voltage application can be used as structural maps to check the quality of the GNP doped coating.

JOURNAL OF INDUSTRIAL TEXTILES (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Low Voltage and Low Temperature Soft Electrothermal Actuator Based on PE/Graphite Bilayer Film

Xu Yeli et al.

Summary: The study successfully demonstrates the use of a PE/graphite composite membrane for electrothermal actuation, offering benefits of simplicity, cost-effectiveness, and suitability for mass production. Operating at low voltage and temperature, the actuator maintains high performance, making it widely applicable in the field of soft actuators.

MACROMOLECULAR MATERIALS AND ENGINEERING (2022)

Add to Collection

Article Engineering, Environmental

A super-flexible and transparent wood film/silver nanowire electrode for optical and capacitive dual-mode sensing wood-based electronic skin

Qiheng Tang et al.

Summary: Research on flexible electronic skin (e-skin) has focused on improving sensitivity and user-friendly interfaces, with a growing interest in naturally degradable materials. The e-skin developed in this study uses silver nanowires and super-flexible transparent wood as electrodes, demonstrating high transmittance and excellent sheet resistance stability.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Multifunctional Wearable Thermoelectrics for Personal Thermal Management

Lei Li et al.

Summary: This review highlights the unique characteristics of thermoelectric personal thermal management (PTM) compared to other technologies, and systematically summarizes its key parameters and fundamental functions. The advances in thermoelectric PTM are overviewed from material design to wearable device design viewpoints. Furthermore, the key challenges and future research directions of thermoelectric PTM are pointed out.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Polymer Science

Recent progress in cellulose-based composites towards flame retardancy applications

Mohamad Nurul Azman Mohammad Taib et al.

Summary: Cellulose is a biomaterial that has excellent properties and has the potential to be widely used. Its different forms have different morphological and physical properties. Modification can improve the cellulose properties for better compatibility with polymeric matrices.

POLYMER (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of multiwalled carbon nanotubes and reduced graphene oxide of different proportions on the electrothermal properties of cationic cellulose nanofibril-based composites

Shanqing Liang et al.

Summary: Cationic cellulose nanofibril (CCNF)-based electrothermal composites were successfully fabricated using ultrasonic dispersion and vacuum filtration techniques. The proportions of nanocarbon filler had a significant effect on the electrothermal properties of the composites. The mixed use of MWCNT and RGO effectively improved the electrothermal performance, making the composite suitable for eco-friendly and flexible resistance heating electronics.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Recent Progress in High-Strength and Robust Regenerated Cellulose Materials

Hu Tu et al.

Summary: Cellulose, as the most abundant sustainable polymer, has the potential to act as an ideal substitute for plastics due to its low cost, wide availability, and biodegradability. Recent achievements in developing cellulose green solvents and regenerated cellulose materials with high strength through bottom-up approaches have shown potential applications in textiles, biomedicine, energy storage, packaging, etc. Importantly, these cellulose-based materials can be biodegraded in soil and oceans, reducing environmental pollution.

ADVANCED MATERIALS (2021)

Add to Collection

Article Robotics

Recent Progress of Soft Electrothermal Actuators

Ye Tian et al.

Summary: This article provides a comprehensive review on recent progress of soft electrothermal actuators through five sections: device design, materials, properties, fabrication methods, applications, and prospects. It emphasizes the development towards increasing electrothermal efficiency and response speed, encouraging achievement of higher performance and broader applications in the future.

SOFT ROBOTICS (2021)

Add to Collection

Article Chemistry, Applied

Constructing cellulose nanocrystal/graphene nanoplatelet networks in phase change materials toward intelligent thermal management

Xiao Wei et al.

Summary: The hybrid networks of CNCs and GNPs in PEG enhanced the shape stability of PCMs while maintaining high thermal conductivity, showing outstanding light-thermal and electro-thermal conversion capabilities. The composite PCMs could serve as temperature stabilizing components for electronic devices in extreme environments.

CARBOHYDRATE POLYMERS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Silicone-Coated MXene/Cellulose Nanofiber Aerogel Films with Photothermal and Joule Heating Performances for Electromagnetic Interference Shielding

Wei Xin et al.

Summary: This study presents multifunctional composite aerogels of cellulose nanofibers, MXenes, and silicone, which exhibit remarkable electrical conductivity, EMI shielding efficiency, water repellency, and excellent Joule heating and photothermal performances. These silicone-MXene/CNF aerogel films have promising applications in intelligent garments and EMI shielding fields.

ACS APPLIED NANO MATERIALS (2021)

Add to Collection

Review Chemistry, Applied

Bacterial cellulose-based composites for biomedical and cosmetic applications: Research progress and existing products

Bricard Mbituyimana et al.

Summary: Bacterial cellulose is a promising material for various biomedical and cosmetic applications. Research has focused on manufacturing BC-based composites with other materials for high-performance products in biomedical fields. Additionally, improving the properties of BC through different reinforcement substances and organized arrangement of fibers has shown positive results.

CARBOHYDRATE POLYMERS (2021)

Add to Collection

Article Engineering, Environmental

Cellulose based composite foams and aerogels for advanced energy storage devices

Huayu Liu et al.

Summary: Cellulose foams and aerogels are versatile scaffolds for various applications due to their low density and biodegradability, and they have attracted extensive attention in the research of sustainable electrode materials for energy storage devices.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Multidisciplinary

Soft robotic reinforced by carbon fiber skeleton with large deformation and enhanced blocking forces

Xiaohui Zhang et al.

Summary: A carbon fiber skeleton strategy is proposed to enhance the strength and electric-triggered performance of thin-film actuators in soft robotics, significantly improving bending angle and blocking force under the same driving condition compared to non-skeletal actuators.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Realization of 3D epoxy resin/Ti3C2Tx MXene aerogel composites for low-voltage electrothermal heating

Pei Yang et al.

Summary: The study presents a novel 3D epoxy resin/Ti3C2Tx MXene composite material prepared using a unidirectional freeze-casting technique, demonstrating excellent Joule heating performance for electrothermal applications. The composite offers a potential alternative to traditional metal-based and nanocarbon-based electrothermal materials, providing a simple and cost-effective method for preparation.

2D MATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

High-Performance Laminated Fabric with Enhanced Photothermal Conversion and Joule Heating Effect for Personal Thermal Management

Zhiguang Guo et al.

Summary: Inspired by the thermal management of polar bears, a multifunctional wearable heater with enhanced photothermal conversion, mid-infrared reflection, thermal insulation, and electrical heating performance was developed. It can quickly reach high temperatures and provide good insulation, showing potential for energy-saving personal thermal management fabrics.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Multidisciplinary Sciences

Electrical switching of high-performance bioinspired nanocellulose nanocomposites

Dejin Jiao et al.

Summary: In this study, electrical switching was introduced to bioinspired nanocomposites, allowing for reversible changes in mechanical properties of highly-reinforced cellulose nanopapers using low direct current. This innovative approach demonstrates the potential for applications in adaptive damping, structural materials, and soft robotics.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Multifunctional RGO/Ti3C2Tx MXene fabrics for electrochemical energy storage, electromagnetic interference shielding, electrothermal and human motion detection

Xianhong Zheng et al.

Summary: This study presents a scalable spray-coating and dip-coating strategy to fabricate multifunctional modified cotton fabrics with excellent conductivity and electrochemical performance for high-performance supercapacitors and strain sensors. The multifunctional fabrics demonstrate great potential in wearable electronics.

MATERIALS & DESIGN (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Multifunctional MXene/Chitosan-Coated Cotton Fabric for Intelligent Fire Protection

Binglin Wang et al.

Summary: The MXene/CCS@CF cotton fabric developed in this study demonstrated accurate temperature sensing, excellent fire safety performance, and diverse human motion detection capabilities, along with controllable Joule heating performance for extreme cold weather conditions.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Materials Science, Composites

Flexible, electrothermal-driven controllable carbon fiber/poly (ethylene-co-vinyl acetate) shape memory composites for electromagnetic shielding

Haohao Lu et al.

Summary: Carbon fiber felt (CFF) combined with poly(ethylene-co-vinyl acetate) (EVA) has a wide range of applications in EMI shielding due to its high shielding effect and shape memory performance. This composite material plays a significant role in flexible electronic equipment and other frontier fields.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Ultrathin, biomimetic multifunctional leaf-like silver nanowires/Ti3C2Tx MXene/cellulose nanofibrils nanocomposite film for high-performance electromagnetic interference shielding and thermal management

Qing Liu et al.

Summary: An ultrathin, flexible and super conductive silver nanowires doped Ti(3)C(2)Tx/cellulose nanofibrils film with biomimetic leaf-vein structure was reported. The film exhibited high electrical conductivity and superior electromagnetic interference shielding effectiveness. Additionally, it showed synergistic effect on mechanical property and could be used as a Joule heater for thermal management.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

A Low-Cost and High-Efficiency Electrothermal Composite Film Composed of Hybrid Conductivity Fillers and Polymer Blends Matrix for High-Performance Plate Heater

Yang Xia et al.

Summary: An electrothermal film with sandwich-like structure composed of hybrid conductive fillers and polymer matrix has been fabricated, demonstrating low voltage operation, superior response feature, high electrothermal conversion efficiency, stability, and potential for practical applications.

JOURNAL OF ELECTRONIC MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Steady and Robust CNTs-Based Electric Heating Membrane Fabricated by Addition of Nanocellulose and Hot-Press Encapsulation

Xinpu Li et al.

Summary: In this study, a biomass-based electric heating membrane (EHM) was successfully fabricated with stable electric heating performance, achieved through the combination of CNTs and NFC, as well as encapsulation using PDMS for reinforcement. The obtained membrane showed a steady resistance variation as low as 5.1% under energized operation, and exhibited flexibility, waterproofing, and insulation properties for use in low-voltage applications.

LANGMUIR (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Conductive Biomass Films Containing Graphene Oxide and Cationic Cellulose Nanofibers for Electric-Heating Applications

Shanqing Liang et al.

Summary: A flexible low-voltage biomass matrix electric-heating composite was fabricated using ultrasonic dispersion and suction filtration, incorporating graphene oxide and cationic cellulose nanofiber. The introduction of graphene oxide increased thermal stability while decreasing tensile strength and strain of the films. Additionally, the electrical conductivity and power density of the films were significantly improved with increasing graphene oxide content, showcasing rapid temperature attainment and excellent electric heating response capabilities.

NANOMATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Tough and Multifunctional Composite Film Actuators Based on Cellulose Nanofibers toward Smart Wearables

Jie Wei et al.

Summary: This study successfully constructed a cellulose nanofiber-based film actuator with high mechanical properties, excellent Joule heating, and antibacterial capability via a vacuum-assisted filtration approach. The composite film exhibited sensitive humidity response, extraordinary stability, and outstanding antibacterial properties, making it a promising candidate for smart wearables and biomimetic devices.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Facile Fabrication of Densely Packed Ti3C2 MXene/Nanocellulose Composite Films for Enhancing Electromagnetic Interference Shielding and Electro-/Photothermal Performance

Zehang Zhou et al.

Summary: This study proposes a layer-by-layer assembly of cellulose nanofiber and two-dimensional titanium carbide composite materials on bacterial cellulose substrate, preparing multifunctional films with excellent performance in flexibility, mechanical strength, toughness, electromagnetic shielding efficiency, and electro/photothermal heating. The densely packed hierarchical structure and strong interfacial interactions contribute to the outstanding mechanical properties of the films, making them promising for practical applications in EMI shielding and ice accretion elimination.

ACS NANO (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Electromagnetic Interference Shielding and Electrothermal Performance of MXene-Coated Cellulose Hybrid Papers and Fabrics Manufactured by a Facile Scalable Dip-Dry Coating Process

Soo-Yeon Kim et al.

Summary: This study reports the electromagnetic interference (EMI) shielding and electrothermal properties of MXene-coated cellulose hybrid papers (MCPs) and fabrics (MCFs) with high flexibility and low density, manufactured by a dip-dry coating approach. The results show that high electrical conductivity and excellent EMI shielding effectiveness are achieved by multiple dip-dry coating cycles on cellulose papers and fabrics. Additionally, even one-time dip-dry coating cycle samples demonstrate outstanding electrothermal performance at low applied voltages.

ADVANCED ENGINEERING MATERIALS (2021)

Add to Collection

Article Materials Science, Paper & Wood

Fabrication of flexible AgNW/cellulose hybrid film with heat preservation and antibacterial properties for agriculture application

Yu Chen et al.

Summary: This study successfully fabricated degradable AgNW/cellulose hybrid films with controllable thermal insulation and antibacterial properties, providing a potential strategy for producing flexible and biodegradable agricultural films and offering new insights for agricultural thermal management.

CELLULOSE (2021)

Add to Collection

Article Materials Science, Paper & Wood

Robust cellulose-carbon nanotube conductive fibers for electrical heating and humidity sensing

Jianhua Ma et al.

Summary: Mechanically strong and highly conductive cellulose/carbon nanotube (CNT) composite fibers were successfully spun using an aqueous alkaline/urea solution, showing excellent mechanical strength and high electrical conductivity for applications in joule heating and humidity measurement.

CELLULOSE (2021)

Add to Collection

Article Materials Science, Paper & Wood

Multi-functional and water-resistant conductive silver nanoparticle-decorated cotton textiles with excellent joule heating performances and human motion monitoring

Zengpei Guo et al.

Summary: A multifunctional conductive cotton textile was developed by reducing silver nanoparticles and decorating polydimethylsiloxane on cotton fibers. The textile demonstrated rapid thermal response, long-time steady heating performance, antifouling properties, and excellent strain sensing capabilities. Additionally, it also showed resistance to bacterial, providing new possibilities for lightweight, portable, and wearable electronic textile devices in the future.

CELLULOSE (2021)

Add to Collection

Article Engineering, Environmental

Multifunctional and superhydrophobic cellulose composite paper for electromagnetic shielding, hydraulic triboelectric nanogenerator and Joule heating applications

En Li et al.

Summary: Cellulose-based materials have shown great potential in various applications such as electromagnetic protection, clean energy harvesting, and thermal management. The multifunctional and superhydrophobic cellulose composite paper developed in this study exhibits high-performance electromagnetic interference shielding effectiveness, high electrical conductivity, and the ability to harvest water energy as a hydraulic triboelectric nanogenerator. Additionally, the paper demonstrates excellent thermal management capabilities, making it a promising material for integrated smart electronics, clean energy harvesting, and thermal management applications.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Forestry

Multiwalled carbon nanotube/cationic cellulose nanofibril electrothermal films: mechanical, electrical, electrothermal, and cycling performances

Shanqing Liang et al.

Summary: The use of MWCNT and CCNF in preparing electrothermal films improved thermal stability and electrical conductivity. The films exhibited strong nonlinearity and lower power consumption with excellent thermal cycling stability at different MWCNT contents.

WOOD SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Mechanical Performance of Binary and Ternary Hybrid MXene/Nanocellulose Hydro- and Aerogels - A Critical Review

Franck Quero et al.

Summary: This review summarizes the compressive mechanical properties of binary and ternary hybrid MXene/nanocellulose hydro- and aerogels, highlighting their potential and future research directions for enhancing their compressive mechanical properties.

ADVANCED MATERIALS INTERFACES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Functional textiles and composite based wearable thermal devices for Joule heating: progress and perspectives

Md Omar Faruk et al.

Summary: This review focuses on recent advancements in wearable heating devices, discussing strategies to minimize energy consumption and enhance thermal comfort through individual heating. Key aspects include the development of advanced textiles and composite structures, along with materials such as 1D and 2D materials, metallic nanomaterials, and conducting polymers. Future research efforts are needed to further develop next-generation personal thermal management devices.

APPLIED MATERIALS TODAY (2021)

Add to Collection

Review Nanoscience & Nanotechnology

Soft actuators built from cellulose paper: A review on actuation, material, fabrication, and applications

Yan Liu et al.

Summary: This review summarizes the milestones and recent achievements of cellulose paper-based actuators, discussing the application of cellulose paper in electro-, thermal, moisture, and magnetic actuation mechanisms, as well as available fabrication techniques. It also emphasizes the programmable actions of cellulose paper in emerging applications and the challenges it faces.

JOURNAL OF SCIENCE-ADVANCED MATERIALS AND DEVICES (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Carbon Nanotube-Based Hierarchical Paper Structure for Ultra-high Electrothermal Actuation in a Wide Humidity Range

Rituparna Ghosh et al.

Summary: The hierarchical structure of multiwalled carbon nanotubes, cellulose paper, and the polydimethylsiloxane polymer is achieved, allowing for a low-power-driven actuator that can operate under various humidity conditions. The actuator demonstrates ultrahigh actuation at a much lower power density, with the capability to lift objects significantly heavier than its own weight.

ACS APPLIED ELECTRONIC MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Stable cellulose/graphene inks mediated by an inorganic base for the fabrication of conductive fibers

Shaoxue Pan et al.

Summary: The inorganic base-mediated strategy allows for the uniform dispersion of graphene in aqueous cellulose solution without surfactants, resulting in stable inks. The uniformly dispersed graphene nanosheets can enhance the strength and toughness of fibers, showing good stability and electrical conductivity, with potential applications in respiratory rate monitoring and electromagnetic shielding fabrics. This strategy provides a new pathway for the low-cost and environmentally friendly aqueous processing of high-performance graphene-based composites.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Add to Collection

Review Engineering, Electrical & Electronic

Advances in healthcare wearable devices

Sheikh M. A. Iqbal et al.

Summary: Wearable devices have various applications in healthcare, from monitoring physiological diseases to serving as drug delivery systems. Despite facing challenges, they hold promise in becoming personalized healthcare systems.

NPJ FLEXIBLE ELECTRONICS (2021)

Add to Collection

Article Chemistry, Physical

A resilient and lightweight bacterial cellulose-derived C/rGO aerogel-based electromagnetic wave absorber integrated with multiple functions

Tiantian Bai et al.

Summary: This study developed an aerogel-based electromagnetic wave (EMW) absorber with multiple functions, including piezoresistive sensing, infrared stealth, thermal insulation, and Joule heating. The aerogel demonstrated excellent EMW absorption performance, stable piezoresistive sensing, effective thermal infrared stealth, thermal insulating properties, and adjustable Joule heating performance, paving the way for high-performance EMW absorption materials with multiple functions.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Characterization of nanocellulose-graphene electric heating membranes prepared via ultrasonic dispersion

Chuang Shao et al.

JOURNAL OF MATERIALS SCIENCE (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Flexible, Robust, and Multifunctional Electromagnetic Interference Shielding Film with Alternating Cellulose Nanofiber and MXene Layers

Bing Zhou et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Laminated Fibrous Membrane Inspired by Polar Bear Pelt for Outdoor Personal Radiation Management

Xuejie Yue et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Flexible MXene-Decorated Fabric with Interwoven Conductive Networks for Integrated Joule Heating, Electromagnetic Interference Shielding, and Strain Sensing Performances

Xiansheng Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Multifunctional Flexible Electromagnetic Interference Shielding Silver Nanowires/Cellulose Films with Excellent Thermal Management and Joule Heating Performances

Chaobo Liang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Laser-Induced Graphene Paper Heaters with Multimodally Patternable Electrothermal Performance for Low-Energy Manufacturing of Composites

Junyu Chen et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Multifunctional MXene-Based Fireproof Electromagnetic Shielding Films with Exceptional Anisotropic Heat Dissipation Capability and Joule Heating Performance

Lei Li et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Review Materials Science, Composites

Electro-thermal and mechanical performance of multi-wall carbon nanotubes buckypapers embedded in fibre reinforced polymer composites for ice protection applications

Francesco Zangrossi et al.

JOURNAL OF COMPOSITE MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Properties of Graphene-Thermoplastic Polyurethane Flexible Conductive Film

Yuehui Wang et al.

COATINGS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Deterministic Role of Carbon Nanotube-Substrate Coupling for Ultrahigh Actuation in Bilayer Electrothermal Actuators

Rituparna Ghosh et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Wood-Inspired Anisotropic Cellulose Nanofibril Composite Sponges for Multifunctional Applications

Yiming Chen et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Smart Ti3C2Tx MXene Fabric with Fast Humidity Response and Joule Heating for Healthcare and Medical Therapy Applications

Xing Zhao et al.

ACS NANO (2020)

Add to Collection

Article Engineering, Environmental

Multifunctional conductive cellulose fabric with flexibility, superamphiphobicity and flame-retardancy for all-weather wearable smart electronic textiles and high-temperature warning device

Jiaxin Wang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Chemistry, Physical

Multi-walled carbon nanotube/polyurethane electrothermal films

Jin-Jin Jiang et al.

FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES (2020)

Add to Collection

Article Chemistry, Applied

Preparation of cellulose-coated cotton fabric and its application for the separation of emulsified oil in water

Yu-Rong Zhang et al.

CARBOHYDRATE POLYMERS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Screen-Printed High-Performance Flexible Electrothermal Films Based on Three-Dimensional Intercalation Graphene Nanosheets/MWCNT/Carbon Black Composite

Yu Liao et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Multifunctional Electromagnetic Interference Shielding Ternary Alloy (Ni-W-P) Decorated Fabric with Wide-Operating-Range Joule Heating Performances

Yu Bai et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Engineering, Multidisciplinary

Waterproof MXene-decorated wood-pulp fabrics for high-efficiency electromagnetic interference shielding and Joule heating

Xichen Jia et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Materials Science, Composites

A superhydrophobic/electrothermal synergistically anti-icing strategy based on graphene composite

Peng Wang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Biochemistry & Molecular Biology

A Nanofibrillated Cellulose-Based Electrothermal Aerogel Constructed with Carbon Nanotubes and Graphene

Bing Zhuo et al.

MOLECULES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

A flexible and stretchable polypyrrole/knitted cotton for electrothermal heater

Bo Wang et al.

ORGANIC ELECTRONICS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Creation of polyaniline-coated polyester fabrics with conductive, electrothermal and energy-storage properties via micro-dissolution method

Zhenyun Zhao et al.

MATERIALS TODAY COMMUNICATIONS (2020)

Add to Collection

Article Materials Science, Composites

Superhydrophobic and self-healable tri-layered composites with great thermal resistance and electrothermal ability

Danyi Li et al.

COMPOSITES COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Applied

Ultra-high thermal-conductive, reduced graphene oxide welded cellulose nanofibrils network for efficient thermal management

Shuangxi Nie et al.

CARBOHYDRATE POLYMERS (2020)

Add to Collection

Review Chemistry, Applied

Conductive Regenerated Cellulose Film and Its Electronic Devices - A Review

Xi Liu et al.

CARBOHYDRATE POLYMERS (2020)

Add to Collection

Article Engineering, Environmental

Mechanically flexible, waterproof, breathable cellulose/polypyrrole/polyurethane composite aerogels as wearable heaters for personal thermal management

Yating Wang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Automation & Control Systems

Electrothermal Actuators with Ultrafast Response Speed and Large Deformation

Guinan Chen et al.

ADVANCED INTELLIGENT SYSTEMS (2020)

Add to Collection

Article Agricultural Engineering

Investigation of a root zone heating system for greenhouse seedling and its effects on micro-environment

Fen He et al.

INTERNATIONAL JOURNAL OF AGRICULTURAL AND BIOLOGICAL ENGINEERING (2020)

Add to Collection

Article Materials Science, Multidisciplinary

A PEDOT:PSS and graphene-clad smart textile-based wearable electronic Joule heater with high thermal stability

Abbas Ahmed et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Add to Collection

Review Medicine, Research & Experimental

Antibacterial cellulose-based aerogels for wound healing application: A review

Esam Bashir Yahya et al.

BIOMEDICAL RESEARCH AND THERAPY (2020)

Add to Collection

Article Engineering, Environmental

A shape-stable phase change composite prepared from cellulose nanofiber/polypyrrole/polyethylene glycol for electric-thermal energy conversion and storage

Luying Chen et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Materials Science, Textiles

Preparation of polypyrrole coated on Polyester Cleanroom Wiper as heater device

Juan Xie et al.

JOURNAL OF ENGINEERED FIBERS AND FABRICS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Regenerated and rotation-induced cellulose-wrapped oriented CNT fibers for wearable multifunctional sensors

Changfei Jing et al.

NANOSCALE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Transforming commercial regenerated cellulose yarns into multifunctional wearable electronic textiles

Jingchun Lv et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Add to Collection

Article Chemistry, Applied

Thermally stable and green cellulose-based composites strengthened by styrene-co-acrylate latex for lithium-ion battery separators

Tianyu Guo et al.

CARBOHYDRATE POLYMERS (2019)

Add to Collection

Article Engineering, Manufacturing

Impact of delignification on morphological, optical and mechanical properties of transparent wood

Jiamin Wu et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Add to Collection

Article Materials Science, Textiles

In situ polymerization of polypyrrole on cotton fabrics as flexible electrothermal materials

Juan Xie et al.

JOURNAL OF ENGINEERED FIBERS AND FABRICS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Flexible and Highly Sensitive Humidity Sensor Based on Cellulose Nanofibers and Carbon Nanotube Composite Film

Penghui Zhu et al.

LANGMUIR (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Multifunctional Soft Actuators Based on Anisotropic Paper/Polymer Bilayer Toward Bioinspired Applications

Ying Hu et al.

ADVANCED MATERIALS TECHNOLOGIES (2019)

Add to Collection

Article Materials Science, Paper & Wood

Study of electrothermal properties of silver nanowire/polydopamine/cotton-based nanocomposites

Zhiliang Chen et al.

CELLULOSE (2019)

Add to Collection

Article Chemistry, Applied

Using cellulose fibers to fabricate transparent paper by microfibrillation

Zhenzhen Li et al.

CARBOHYDRATE POLYMERS (2019)

Add to Collection

Article Materials Science, Paper & Wood

Anisotropic nanocellulose aerogels with ordered structures fabricated by directional freeze-drying for fast liquid transport

Yiming Chen et al.

CELLULOSE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Optoelectronic and Electrothermal Properties of Transparent Conductive Silver Nanowires Films

Yuehui Wang et al.

NANOMATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Multifunctional Janus fibrous hybrid membranes with sandwich structure for on-demand personal thermal management

Xuejie Yue et al.

NANO ENERGY (2019)

Add to Collection

Article Biochemistry & Molecular Biology

The use of nanofibrillated cellulose to fabricate a homogeneous and flexible graphene-based electric heating membrane

Xinpu Li et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

Add to Collection

Review Materials Science, Paper & Wood

Deep eutectic solvents (DESs) for cellulose dissolution: a mini-review

Yang-Lei Chen et al.

CELLULOSE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Electrical heating behavior of flexible thermoplastic polyurethane/Super-P nanoparticle composite films for advanced wearable heaters

Zhen Xiao et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Enhanced electrothermal efficiency of flexible graphene fabric Joule heaters with the aid of graphene oxide

Mingwei Tian et al.

MATERIALS LETTERS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

A highly conductive, pliable and foldable Cu/cellulose paper electrode enabled by controlled deposition of copper nanoparticles

Yang Yang et al.

NANOSCALE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Novel stretchable thermochromic transparent heaters designed for smart window defroster applications by spray coating silver nanowire

Loganathan Veeramuthu et al.

RSC ADVANCES (2019)

Add to Collection

Article Chemistry, Applied

High-strength and morphology-controlled aerogel based on carboxymethyl cellulose and graphene oxide

Xuesong Ge et al.

CARBOHYDRATE POLYMERS (2018)

Add to Collection

Article Materials Science, Paper & Wood

Structural and electrical properties of conductive cotton fabrics coated with the composite polyaniline/carbon black

Fahad Alhashmi Alamer

CELLULOSE (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Polypyrrole coated knitted fabric for robust wearable sensor and heater

Dandan Hao et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)

Add to Collection

Article Chemistry, Physical

Thin Electric Heating Membrane Constructed with a Three-Dimensional Nanofibrillated Cellulose-Graphene-Graphene Oxide System

Chuang Shao et al.

MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Compressible Wood Sponges with a Spring-like Lamellar Structure as Effective and Reusable Oil Absorbents

Hao Guan et al.

ACS NANO (2018)

Add to Collection

Article Engineering, Chemical

Robust and Flexible Cellulose Nanofiber/Multiwalled Carbon Nanotube Film for High-Performance Electromagnetic Interference Shielding

Haoruo Zhang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)

Add to Collection

Article Multidisciplinary Sciences

Green preparation and characterization of graphene oxide/carbon nanotubes-loaded carboxymethyl cellulose nanocomposites

Yeong-Rae Son et al.

SCIENTIFIC REPORTS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Production and Properties of Carbon Nanotube/Cellulose Composite Paper

Kazi Hanium Maria et al.

JOURNAL OF NANOMATERIALS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Wet-spinning of highly conductive nanocellulose-silver fibers

Jinfeng Wang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2017)

Add to Collection

Article Chemistry, Physical

Scalable, anisotropic transparent paper directly from wood for light management in solar cells

Chao Jia et al.

NANO ENERGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Effects of Various Surfactants on the Dispersion of MWCNTs-OH in Aqueous Solution

Hongzhi Cui et al.

NANOMATERIALS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Weft-Knitted Fabric for a Highly Stretchable and Low-Voltage Wearable Heater

Mingchao Zhang et al.

ADVANCED ELECTRONIC MATERIALS (2017)

Add to Collection

Article Materials Science, Composites

A flexible and transparent thin film heater based on a carbon fiber/heat-resistant cellulose composite

Pengbo Lu et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2017)

Add to Collection

Article Materials Science, Composites

In-situ polymerization of PPy/cellulose composite sponge with high elasticity and conductivity for the application of pressure sensor

Mengying Luo et al.

COMPOSITES COMMUNICATIONS (2017)

Add to Collection

Article Materials Science, Paper & Wood

Electrothermochromic paper fabricated by depositing polypyrrole on one side

Chengzhuo Wei et al.

CELLULOSE (2017)

Add to Collection

Article Chemistry, Applied

Structure of cellulose microfibrils in mature cotton fibres

Marta Martinez-Sanz et al.

CARBOHYDRATE POLYMERS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

An arm-like electrothermal actuator based on superaligned carbon nanotube/polymer composites

Zhou Zhi-wei et al.

NEW CARBON MATERIALS (2017)

Add to Collection

Article Materials Science, Composites

Silver nanowire/carbon nanotube/cellulose hybrid papers for electrically conductive and electromagnetic interference shielding elements

Hyeong Yeol Choi et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Transforming Commercial Textiles and Threads into Sewable and Weavable Electric Heaters

Lushuai Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Highly Effective Electromagnetic Interference Shielding Materials based on Silver Nanowire/Cellulose Papers

Tae-Won Lee et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Chemistry, Physical

Flexible carbon nanotube/polyurethane electrothermal films

Jie Luo et al.

CARBON (2016)

Add to Collection

Review Engineering, Manufacturing

Review of the recent developments in cellulose nanocomposite processing

Kristiina Oksman et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

Add to Collection

Article Materials Science, Composites

Electrically conductive and strong cellulose-based composite fibers reinforced with multiwalled carbon nanotube containing multiple hydrogen bonding moiety

Tae-Won Lee et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2016)

Add to Collection

Article Materials Science, Composites

Carbon nanotube/cellulose papers with high performance in electric heating and electromagnetic interference shielding

Tae-Won Lee et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2016)

Add to Collection

Review Engineering, Environmental

A review on modification methods to cellulose-based adsorbents to improve adsorption capacity

Sanna Hokkanen et al.

WATER RESEARCH (2016)

Add to Collection

Review Chemistry, Physical

Recent Progress in Fabrication and Applications of Superhydrophobic Coating on Cellulose-Based Substrates

Hui Liu et al.

MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

Transparent and haze wood composites for highly efficient broadband light management in solar cells

Mingwei Zhu et al.

NANO ENERGY (2016)

Add to Collection

Article Chemistry, Applied

Regenerated cellulose/multiwalled carbon nanotube composite films with efficient electric heating performance

Tae-Won Lee et al.

CARBOHYDRATE POLYMERS (2015)

Add to Collection

Article Chemistry, Applied

Preparation and characterization of regenerated cellulose from ionic liquid using different methods

Zhenghui Liu et al.

CARBOHYDRATE POLYMERS (2015)

Add to Collection

Article Engineering, Chemical

Imparting Cellulosic Paper of High Conductivity by Surface Coating of Dispersed Graphite

Yanjun Tang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Preparation and thermoelectric properties of polythiophene/multiwalled carbon nanotube composites

Lei Wang et al.

SYNTHETIC METALS (2013)

Add to Collection

Article Chemistry, Physical

Multifunctional films composed of carbon nanotubes and cellulose regenerated from alkaline-urea solution

Haisong Qi et al.

JOURNAL OF MATERIALS CHEMISTRY A (2013)

Add to Collection

Review Chemistry, Physical

Surface modifications for the effective dispersion of carbon nanotubes in solvents and polymers

Sang Won Kim et al.

CARBON (2012)

Add to Collection

Review Chemistry, Multidisciplinary

Cellulose nanomaterials review: structure, properties and nanocomposites

Robert J. Moon et al.

CHEMICAL SOCIETY REVIEWS (2011)

Add to Collection

Review Pharmacology & Pharmacy

FREEZE DRYING PROCESS: A REVIEW

Soham Shukla

INTERNATIONAL JOURNAL OF PHARMACEUTICAL SCIENCES AND RESEARCH (2011)

Add to Collection

© Peeref 2019-2024. All rights reserved.