☆ 4.8 Article

Ion pumping synergy with atomic anchoring for dendrite-free Zn anodes

ENERGY STORAGE MATERIALS (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Ion Sieve: Tailoring Zn2+ Desolvation Kinetics and Flux toward Dendrite-Free Metallic Zinc Anodes

Shangqing Jiao et al.

Summary: This study presents an ion sieve coating that effectively inhibits dendrite growth on metallic zinc anodes, improving the rechargeability of aqueous zinc metal batteries. Experimental and theoretical analyses demonstrate that the coating facilitates the desolvation of zinc clusters, weakens hydrogen evolution reaction, and homogenizes ion flux, resulting in dendrite-free zinc deposition. The symmetric cell with the ion sieve coating shows a lifespan of up to 3000 hours, highlighting the enhanced performance of zinc metal batteries.

ACS NANO (2022)

Add to Collection

Article Multidisciplinary Sciences

Open challenges and good experimental practices in the research field of aqueous Zn-ion batteries

Giorgia Zampardi et al.

Summary: Aqueous zinc-ion batteries have potential as stationary storage systems for power-grid applications, but certain challenges need to be addressed and experimental practices need to be aligned with industrial working conditions to promote their commercialization.

NATURE COMMUNICATIONS (2022)

Add to Collection

Article Chemistry, Physical

A Self-Regulated Interface toward Highly Reversible Aqueous Zinc Batteries

Daliang Han et al.

Summary: By using a low-cost ammonium acetate (NH4OAc) additive, a self-regulated zinc/electrolyte interface is built to address the issues of rapid performance deterioration of zinc anodes. The additive induces a dynamic electrostatic shielding layer around the zinc protuberance, promoting uniform zinc deposition, and acts as an interfacial pH buffer to suppress side reactions and precipitation of insoluble by-products. These findings pave the way for practical zinc batteries.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Preferred Orientation of TiN Coatings Enables Stable Zinc Anodes

Jiaxian Zheng et al.

Summary: This study demonstrates that a TiN protective coating with preferential (200) orientation can effectively suppress Zn dendritic growth and side reactions, while regulating the growth pattern of the byproduct. This provides a new pathway for achieving high-efficiency reversible Zn plating/stripping.

ACS ENERGY LETTERS (2022)

Add to Collection

Article Chemistry, Physical

Ultra-stable and deeply rechargeable zinc metal anode enabled by a multifunctional protective layer

He Gan et al.

Summary: In this study, a multi-functional protective layer was constructed to improve the performance of aqueous energy storage devices by regulating the deposition behavior of zinc, overcoming the limitations of uncontrollable dendrites growth and side reactions. The well-designed zinc anode achieved high Coulombic efficiency and long lifespan.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Fast-growing multifunctional ZnMoO4 protection layer enable dendrite-free and hydrogen-suppressed Zn anode

Aosai Chen et al.

Summary: In this study, a uniform ridge-like ZnMoO4 layer was directly formed on the zinc anode within 20 seconds by chemical deposition, improving the issues of uneven zinc deposition and hydrogen evolution in aqueous zinc-ion batteries. Zn@ZnMoO4 demonstrates strong hydrogen suppression capability, excellent cycling stability, and high capacity retention rate.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Stress-Release Functional Liquid Metal-MXene Layers toward Dendrite-Free Zinc Metal Anodes

Jianan Gu et al.

Summary: A special liquid metal electrode was designed and fabricated to solve the uncontrollable dendrite issue in zinc anodes, and a flexible zinc-based anode was successfully prepared with high performance and long lifespan, which is of great significance for the development of next-generation zinc-based batteries.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Highly enhanced reversibility of a Zn anode by in-situ texturing

Yi Liu et al.

Summary: By adding phosphoric acid to zinc electrolyte, the growth of zinc electrode can be made more uniform and reversible. This approach not only improves the cycling stability and rate capability of zinc-MnO2 batteries, but also makes aqueous zinc metal batteries competitive for practical applications.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Covalent organic framework film protected zinc anode for highly stable rechargeable aqueous zinc-ion batteries

Jing Zhao et al.

Summary: In this study, a zincophilic covalent organic framework film was used to stabilize the zinc anode and inhibit dendrite growth, leading to improved electrochemical stability and cycling life. This work provides inspiration for material design in other battery fields, such as separator and electrolyte.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

An enhanced kinetics and ultra-stable zinc electrode by functionalized boron nitride intermediate layer engineering

Minghui Qiu et al.

Summary: In this study, an intermediate layer of sulfonate group modified boron nitride nanosheets was designed to regulate the electrochemical behavior of zinc, effectively suppressing dendrite growth and side reactions. The resulting zinc anode showed enhanced performance in aqueous zinc-ion batteries.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Toward stable zinc aqueous rechargeable batteries by anode morphology modulation via polyaspartic acid additive

Tianyi Zhou et al.

Summary: The introduction of PASP as an electrolyte additive for aqueous rechargeable zinc batteries can address the issues of dendrite growth and side-reactions, leading to improved cyclic stability and high Coulombic efficiency.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Electrolyte/electrode interfacial electrochemical behaviors and optimization strategies in aqueous zinc-ion batteries

Miao Zhou et al.

Summary: Aqueous zinc-ion batteries (ZIBs) are a promising alternative for large-scale energy storage due to their environmental friendliness, low cost, and safety. However, the understanding of the electrolyte/electrode interfacial electrochemical behaviors, which significantly affect the performance of ZIBs, is still in the early stage. This review focuses on the characteristics and formation mechanism of the electrode/electrolyte interface (EEI) and discusses the various ionic electrochemical behaviors at EEI and interfacial optimization strategies. Practical considerations and future perspectives for manipulating EEI in aqueous ZIBs are also proposed.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Intercalation of organics into layered structures enables superior interface compatibility and fast charge diffusion for dendrite-free Zn anodes

Huili Peng et al.

Summary: By intercalating n-butylamine into monodisperse hexagonal nanoplates of alpha-ZrP, the compatibility with hydrophobic polymers is improved, resulting in a dense and robust artificial layer on the zinc anode. This reduces direct exposure to electrolytes and suppresses side reactions, leading to improved electrochemical performance.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Interfacial Manipulation via In Situ Grown ZnSe Cultivator toward Highly Reversible Zn Metal Anodes

Xianzhong Yang et al.

Summary: The study successfully inhibited Zn dendrite formation and side reactions by depositing a ZnSe film on commercial Zn foil, leading to improved cyclic stability of the battery and providing feasibility for commercial applications.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A Patternable and In Situ Formed Polymeric Zinc Blanket for a Reversible Zinc Anode in a Skin-Mountable Microbattery

Minshen Zhu et al.

Summary: The study presents a technique using a polyimide coating to solve the capacity loss issue of zinc anodes in an acid electrolyte. The polyimide coordinates with zinc ions to build a zinc blanket, reducing the concentration gradient at the electrode/electrolyte interface for fast kinetics and low plating/stripping overpotential.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Anion Texturing Towards Dendrite-Free Zn Anode for Aqueous Rechargeable Batteries

Du Yuan et al.

Summary: Texturing zinc has been demonstrated as an effective approach to address the issue of zinc dendrite formation, showing highly reversible stripping/plating at high current density without dendrite characteristics. The development of anion-induced zinc texturing provides a pathway to explore zinc chemistry and advance aqueous rechargeable batteries.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Engineering, Environmental

Ultra-highly stable zinc metal anode via 3D-printed g-C3N4 modulating interface for long life energy storage systems

Penggao Liu et al.

Summary: The research successfully established a zincophile interphase based on 3D-printed g-C3N4 modulating interface, facilitating homogeneous zinc nucleation and dendrite-free growth for highly reversible Zn plating/stripping. The novel strategy showed lower energy barrier and more homogeneously charge distribution, leading to superior cycling stability in Zn metal batteries.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Environmental

Highly reversible and dendrite-free Zn electrodeposition enabled by a thin metallic interfacial layer in aqueous batteries

Yuanjun Zhang et al.

Summary: Adding a thin metallic Cu or Ag interfacial layer in aqueous batteries enables highly reversible and nondendritic plating/stripping of zinc metal anodes with high Coulombic efficiency. This breakthrough improves the performance and cycling life of zinc metal-based energy storage technologies.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Electrolyte Design for In Situ Construction of Highly Zn 2+ ‐Conductive Solid Electrolyte Interphase to Enable High‐Performance Aqueous Zn‐Ion Batteries under Practical Conditions

Xiaohui Zeng et al.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Design of a Solid Electrolyte Interphase for Aqueous Zn Batteries

Dan Li et al.

Summary: A low-concentration aqueous Zn(OTF)(2)-Zn(NO3)(2) electrolyte was designed to form a robust inorganic ZnF2-Zn-5(CO3)(2)(OH)(6)-organic bilayer SEI, allowing high Coulombic efficiency and energy density. The study achieved a high CE of 99.8% for 200 h in Ti parallel to Zn cells, and a high energy density of 168 Wh kg(-1) with 96.5% retention for 700 cycles in Zn parallel to MnO2 cells with a low Zn/MnO2 capacity ratio of 2:1.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Physical

Boosting the cyclability of tetracyanoquinodimethane (TCNQ) as cathode material in aqueous battery with high valent cation

Yun Zhong et al.

Summary: By adding Al3+ salt into TCNQ, the crystalline structure is stabilized and solubility is reduced, leading to improved specific capacity and cycle life.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Scalable and Controllable Synthesis of Interface-Engineered Nanoporous Host for Dendrite-Free and High Rate Zinc Metal Batteries

Yongling An et al.

Summary: Rechargeable zinc-ion batteries are promising candidates for renewable and safe energy storage systems, but uncontrolled dendrite growth of the zinc anode has been a hindrance. This study developed a scalable and controllable approach to convert commercial titanium foil into 3D porous titanium, which effectively inhibits dendritic growth and ensures stable zinc plating/stripping. The 3D porous titanium also demonstrates good resistance to corrosion, high electrical conductivity, and excellent mechanical properties.

ACS NANO (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Bifunctional Hydrated Gel Electrolyte for Long-Cycling Zn-Ion Battery with NASICON-Type Cathode

Xidong Lin et al.

Summary: A novel hydrated gel electrolyte (HGE) for aqueous Zn-ion batteries is proposed in this study, which effectively suppresses the formation of Zn dendrites and enhances battery performance. By a simple fabrication method, the HGE paired with specific cathode materials can achieve stable battery cycling performance.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Ultrathin and Ultralight Zn Micromesh-Induced Spatial-Selection Deposition for Flexible High-Specific-Energy Zn-Ion Batteries

Huaizhi Liu et al.

Summary: By combining photolithography with electrochemical machining, a flexible ultrathin and ultralight Zn micromesh is fabricated for high-performance aqueous Zn-ion batteries, demonstrating excellent flexibility and mechanical strength.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Regulating Dendrite-Free Zinc Deposition by 3D Zincopilic Nitrogen-Doped Vertical Graphene for High-Performance Flexible Zn-Ion Batteries

Qinghe Cao et al.

Summary: The proposed 3D nitrogen-doped vertical graphene nanosheets grown on carbon cloth improve the performance of zinc-ion batteries by achieving uniform zinc nucleation, optimizing electric distribution, and enhancing the zinc deposition/stripping process, leading to higher electrochemical performance. This technology not only achieves high cycling stability of the battery, but also exhibits outstanding mechanical flexibility, showing great potential for portable and wearable electronics.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Self-Assembling Films of Covalent Organic Frameworks Enable Long-Term, Efficient Cycling of Zinc-Ion Batteries

Jun Heuk Park et al.

Summary: In this study, the use of ultrathin COF films on zinc electrodes significantly improved the rechargeability and cycle life of zinc aqueous batteries by minimizing surface corrosion and large dendrite formation. The batteries with COF coatings showed excellent capacity retention and stable polarization voltage during cycling, demonstrating the potential for use in various applications, including foldable wire-type batteries.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Reducing Water Activity by Zeolite Molecular Sieve Membrane for Long-Life Rechargeable Zinc Battery

Huijun Yang et al.

Summary: The zeolite molecular sieve-modified aqueous electrolyte shows reduced water activity and side reactions, leading to improved performance at the electrolyte/electrode interface. This modification results in less hydrogen evolution and corrosion, as well as better cycle life and stability of the battery cells.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Highly Reversible, Grain-Directed Zinc Deposition in Aqueous Zinc Ion Batteries

Jaeho Shin et al.

Summary: The study improved the performance of zinc metal anodes in aqueous zinc ion batteries by forming an artificial solid-electrolyte interphase using cross-linked gelatin, resulting in a more uniform and dense deposition morphology of zinc. Grain-directed electrodeposition method led to more uniform surface growth of zinc metal, enhancing the electrochemical stability.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Manipulating Crystallographic Orientation of Zinc Deposition for Dendrite-free Zinc Ion Batteries

Jin Cao et al.

Summary: A functional separator composed of cellulose nanofibers and graphene oxide is developed for dendrite-free and stable zinc ion batteries. This separator promotes uniform zinc deposition and significantly enhances the performance of zinc anodes in various types of batteries.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Metal-Organic Framework Integrated Anodes for Aqueous Zinc-Ion Batteries

Recep Yuksel et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Energy & Fuels

Realizing high zinc reversibility in rechargeable batteries

Lin Ma et al.

NATURE ENERGY (2020)

Add to Collection

Article Electrochemistry

TCNQ Confined in Porous Organic Structure as Cathode for Aqueous Zinc Battery

Noufal Merukan Chola et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Dendrites in Zn-Based Batteries

Qi Yang et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

Reversible epitaxial electrodeposition of metals in battery anodes

Jingxu Zheng et al.

SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Electrochemical reduction of CO2 by single atom catalyst TM-TCNQ monolayers

Jin-Hang Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Aqueous vs. nonaqueous Zn-ion batteries: consequences of the desolvation penalty at the interface

Dipan Kundu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Optical absorption and electrical properties of MPc (M =Fe, Cu, Zn)-TCNQ interfaces for optoelectronic applications

M. E. Sanchez Vergara et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2018)

Add to Collection

Article Chemistry, Physical

Effect of B doping on optical, electrical properties and defects of ZnO films

Caiying Mao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection

Article Chemistry, Physical

Investigation of sodium insertion into tetracyanoquinodimethane (TCNQ): results for a TCNQ thin film obtained by a surface science approach

R. Precht et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2016)

Add to Collection

Article Chemistry, Physical

Electrochemically Induced Structural Transformation in a γ-MnO2 Cathode of a High Capacity Zinc-Ion Battery System

Muhammad H. Alfaruqi et al.

CHEMISTRY OF MATERIALS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Low-Temperature Fabrication of Alkali Metal-Organic Charge Transfer Complexes on Cotton Textile for Optoelectronics and Gas Sensing

Rajesh Ramanathan et al.

LANGMUIR (2015)

Add to Collection

Article Chemistry, Physical

On-Surface Reaction between Tetracarbonitrile-Functionalized Molecules and Copper Atoms

Elena Nardi et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2014)

Add to Collection

Article Multidisciplinary Sciences

Electrochemically-induced reversible transition from the tunneled to layered polymorphs of manganese dioxide

Boeun Lee et al.

SCIENTIFIC REPORTS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Energetic Zinc Ion Chemistry: The Rechargeable Zinc Ion Battery

Chengjun Xu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2012)

Add to Collection

Article Electrochemistry

In situ time-resolved FTIR spectroelectrochemistry: study of the reduction of TCNQ

V Bellec et al.

ELECTROCHEMISTRY COMMUNICATIONS (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.