☆ 4.8 Article

Direct and stable α-phase formation via ionic liquid solvation for formamidinium-based perovskite solar cells

JOULE (2022)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

Designing Ionic Liquids as the Solvent for Efficient and Stable Perovskite Solar Cells

Lei Gu et al.

Summary: Ionic liquids (ILs) show promise as green solvents for the production of efficient and stable perovskite solar cells (PSCs). However, the limited research on IL solvents and their molecular structures' influence on perovskite film crystallization and device performance is not fully understood.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Additive-Free, Low-Temperature Crystallization of Stable α-FAPbI3 Perovskite

Tian Du et al.

Summary: Aerosol-assisted crystallization (AAC) method is used to convert yellow delta-FAPbI(3) into black alpha-FAPbI(3) at a lower temperature, resulting in significantly improved stability, crystallinity, and photoluminescence yield. Relaxation of residual tensile strains during AAC is identified as the key factor for the formation of phase-stable alpha-FAPbI(3). Pure FAPbI(3) p-i-n solar cells fabricated using low-temperature AAC processing demonstrate higher power conversion efficiency and operational stability compared to those fabricated using high-temperature annealed films.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Mechanochemistry Advances High-Performance Perovskite Solar Cells

Yuzhuo Zhang et al.

Summary: A swift and eco-friendly synthesis route was developed for mass production of halide perovskites in the industry, leading to high-performance perovskite solar cells with superior carrier transport. Additionally, the synthesized powder exhibited superior storage stability for over 10 months, which is conducive to practical commercialization.

ADVANCED MATERIALS (2022)

Add to Collection

Article Multidisciplinary Sciences

Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells

Minjin Kim et al.

Summary: The study replaced the commonly used mesoporous titanium dioxide electron transport layer with a thin layer of polyacrylic acid-stabilized tin(IV) oxide quantum dots, which improved the efficiency and stability of perovskite solar cells and enabled successful scaling up of PSCs production.

SCIENCE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Combined Precursor Engineering and Grain Anchoring Leading to MA-Free, Phase-Pure, and Stable α-Formamidinium Lead Iodide Perovskites for Efficient Solar Cells

Xufeng Ling et al.

Summary: A combined strategy of precursor engineering and grain anchoring was successfully used to prepare stable alpha-FAPbI(3) films, leading to a significant increase in efficiency for FAPbI(3) perovskite solar cells and exhibiting good thermal stability.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Solvent Engineering of the Precursor Solution toward Large-Area Production of Perovskite Solar Cells

Lingfeng Chao et al.

Summary: Solar cells based on emerging organic-inorganic hybrid perovskite materials have achieved impressive power conversion efficiency, but challenges remain in producing industrial-scale cells through solution methods. Advanced progress has been made in solvent engineering to regulate coordination and reduce toxicity of precursor solutions, showing promising prospects for future industrial production of high-performance cells.

ADVANCED MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Efficient perovskite solar cells via improved carrier management

Jason J. Yoo et al.

Summary: Metal halide perovskite solar cells have shown great potential to disrupt the silicon solar cell market with their improved performance, yet still face limitations in light-harvesting due to charge carrier recombination. Efforts to enhance charge carrier management offer a path to increase device performance and approach the theoretical efficiency limit of PSCs.

NATURE (2021)

Add to Collection

Article Chemistry, Physical

Propylammonium Chloride Additive for Efficient and Stable FAPbI3 Perovskite Solar Cells

Yong Zhang et al.

Summary: In this study, n-propylammonium chloride (PACl) is proposed as an alternative to methylammonium chloride (MACl) to improve the stability and efficiency of FAPbI(3)-based perovskite solar cells. The addition of PACl increases perovskite grain size and significantly prolongs carrier lifetime. Compared to MACl, the PACl additive leads to better stability against moisture due to the in situ formed barrier at the bulk perovskite.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Iodine reduction for reproducible and high-performance perovskite solar cells and modules

Shangshang Chen et al.

Summary: Organic iodide perovskite precursors can be oxidized to I-2, impacting the performance and reproducibility of PSCs, but adding benzylhydrazine hydrochloride can effectively improve the situation. The stabilized efficiency of PSCs has been greatly enhanced after treatment.

SCIENCE ADVANCES (2021)

Add to Collection

Article Chemistry, Physical

Tuning the Interactions of Methylammonium Acetate with Acetonitrile to Create Efficient Perovskite Solar Cells

Bo Sun et al.

Summary: The elucidation of intermolecular interactions for the systematic control of nucleation and crystallization is key to produce perovskite photovoltaics with superior performance. In this study, the addition of a weak coordination solvent acetonitrile (ACN) to an ionic liquid precursor solution was found to reduce the coordination between the solvent and perovskite solutes, improving the formation of large micelles and slowing the growth of perovskite crystals for a compact and smooth thin film. MAPbI(2.8)Br(0.2)-based solar cells achieved a high-power conversion efficiency of over 21% with long-term stability, demonstrating the effective improvement of perovskite photovoltaic devices by adjusting the chemical environment of various components of the precursor solution.

JOURNAL OF PHYSICAL CHEMISTRY C (2021)

Add to Collection

Article Multidisciplinary Sciences

Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells

Jaeki Jeong et al.

Summary: The research introduces a new concept of using formate anion to suppress defects in metal halide perovskite films and enhance film crystallinity, leading to improved efficiency and stability of solar cells.

NATURE (2021)

Add to Collection

Article Multidisciplinary Sciences

Stabilizing black-phase formamidinium perovskite formation at room temperature and high humidity

Wei Hui et al.

Summary: A new method for synthesizing stable black-phase formamidinium lead iodide (α-FAPbI(3)) was reported, which enables the stable synthesis of α-FAPbI(3) under high temperature and humidity conditions, and maintains high efficiency under light stress.

SCIENCE (2021)

Add to Collection

Article Multidisciplinary Sciences

Lead halide-templated crystallization of methylamine-free perovskite for efficient photovoltaic modules

Tongle Bu et al.

Summary: Efficient and stable perovskite layers are crucial for the commercialization of perovskite solar cells. A lead halide-templated crystallization strategy has been developed to print formamidinium-cesium lead triiodide perovskite films, achieving high-quality large-area films with controlled nucleation and growth. An unencapsulated device with 23% efficiency and excellent long-term thermal stability has been achieved, showcasing the potential for practical application in the future.

SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Revealing phase evolution mechanism for stabilizing formamidinium-based lead halide perovskites by a key intermediate phase

Zi-Ang Nan et al.

Summary: This study investigates the phase transition process of FA-based perovskites and identifies a key intermediate, providing insights into the phase evolution and stabilization mechanism. The findings deepen the understanding of the roles of cations and anions in maximizing halogen and cage concentrations, and offer suggestions for fabricating high-performance and stable PCSs by controlling various factors.

CHEM (2021)

Add to Collection

Review Nanoscience & Nanotechnology

Minimizing non-radiative recombination losses in perovskite solar cells

Deying Luo et al.

NATURE REVIEWS MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Guanine-Stabilized Formamidinium Lead Iodide Perovskites

Li Hong et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Optics

Efficient and stable Ruddlesden-Popper perovskite solar cell with tailored interlayer molecular interaction

Hui Ren et al.

NATURE PHOTONICS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Tailoring Component Interaction for Air-Processed Efficient and Stable All-Inorganic Perovskite Photovoltaic

Xiaojuan Wang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Perovskite Solution Aging: What Happened and How to Inhibit?

Xiao Wang et al.

CHEM (2020)

Add to Collection

Article Multidisciplinary Sciences

Vapor-assisted deposition of highly efficient, stable black-phase FAPbI3 perovskite solar cells

Haizhou Lu et al.

SCIENCE (2020)

Add to Collection

Article Multidisciplinary Sciences

Impact of strain relaxation on performance of α-formamidinium lead iodide perovskite solar cells

Gwisu Kim et al.

SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Room-Temperature Molten Salt for Facile Fabrication of Efficient and Stable Perovskite Solar Cells in Ambient Air

Lingfeng Chao et al.

CHEM (2019)

Add to Collection

Article Multidisciplinary Sciences

Efficient, stable solar cells by using inherent bandgap of α-phase formamidinium lead iodide

Hanul Min et al.

SCIENCE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Unraveling the Impact of Halide Mixing on Perovskite Stability

Jeremy Hieulle et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Article Multidisciplinary Sciences

Constructive molecular configurations for surface-defect passivation of perovskite photovoltaics

Rui Wang et al.

SCIENCE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Band Structure Engineering of Interfacial Semiconductors Based on Atomically Thin Lead Iodide Crystals

Yan Sun et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Methylammonium Chloride Induces Intermediate Phase Stabilization for Efficient Perovskite Solar Cells

Minjin Kim et al.

JOULE (2019)

Add to Collection

Article Chemistry, Physical

Phase Behavior and Polymorphism of Formamidinium Lead Iodide

Oliver J. Weber et al.

CHEMISTRY OF MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Tuning Molecular Interactions for Highly Reproducible and Efficient Formamidinium Perovskite Solar Cells via Adduct Approach

Jin-Wook Lee et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Add to Collection

Article Chemistry, Physical

Azetidinium lead iodide: synthesis, structural and physico-chemical characterization

Riccardo Panetta et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Multidisciplinary Sciences

Methylammonium-free, high-performance, and stable perovskite solar cells on a planar architecture

Silver-Hamill Turren-Cruz et al.

SCIENCE (2018)

Add to Collection

Review Chemistry, Multidisciplinary

The rapid evolution of highly efficient perovskite solar cells

Juan-Pablo Correa-Baena et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

Effects of counterion size and backbone rigidity on the dynamics of ionic polymer melts and glasses

Yao Fu et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2017)

Add to Collection

Article Chemistry, Physical

The Many Faces of Mixed Ion Perovskites: Unraveling and Understanding the Crystallization Process

Paul Gratia et al.

ACS ENERGY LETTERS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Phenylalkylamine Passivation of Organolead Halide Perovskites Enabling High-Efficiency and Air-Stable Photovoltaic Cells

Feng Wang et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Single Crystal Formamidinium Lead Iodide (FAPbI3): Insight into the Structural, Optical, and Electrical Properties

Qifeng Han et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Transformative Evolution of Organolead Triiodide Perovskite Thin Films from Strong Room-Temperature Solid-Gas Interaction between HPbl3-CH3NH2 Precursor Pair

Shuping Pang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Add to Collection

Article Multidisciplinary Sciences

Compositional engineering of perovskite materials for high-performance solar cells

Nam Joong Jeon et al.

NATURE (2015)

Add to Collection

Article Multidisciplinary Sciences

High-performance photovoltaic perovskite layers fabricated through intramolecular exchange

Woon Seok Yang et al.

SCIENCE (2015)

Add to Collection

Article Chemistry, Physical

NH2CH=NH2PbI3: An Alternative Organolead Iodide Perovskite Sensitizer for Mesoscopic Solar Cells

Shuping Pang et al.

CHEMISTRY OF MATERIALS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Cation-Induced Band-Gap Tuning in Organohalide Perovskites: Interplay of Spin-Orbit Coupling and Octahedra Tilting

Anna Amat et al.

NANO LETTERS (2014)

Add to Collection

Review Chemistry, Multidisciplinary

Protic ionic liquids: Properties and applications

Tamar L. Greaves et al.

CHEMICAL REVIEWS (2008)

Add to Collection

Article Chemistry, Physical

The MARTINI force field: Coarse grained model for biomolecular simulations

Siewert J. Marrink et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2007)

Add to Collection

© Peeref 2019-2024. All rights reserved.