☆ 4.6 Article

An experimental study on a novel reclaimed rubber compound for fiber-reinforced seismic isolators

STRUCTURES (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Civil

Experimental testing of full-scale fiber reinforced elastomeric isolators (FREIs) in unbounded configuration

D. Losanno et al.

Summary: This study investigated the performance of fiber reinforced elastomeric isolators and found them to be more effective in certain aspects compared to traditional steel reinforced elastomeric isolators, with higher damping capacity. The study also revealed the mechanical behavior of FREIs under different loading conditions and significant rollover phenomenon under lateral loading.

ENGINEERING STRUCTURES (2022)

Add to Collection

Article Engineering, Civil

A parametric study on the stability of fiber reinforced rubber bearings under combined axial and shear loads

Andrea Calabrese et al.

Summary: This study is based on extensive FEAs to assess the performance of FRBs under combined axial and shear loads. The research emphasizes that the simple design formula commonly adopted underestimates the effect of axial pressure on limiting the lateral displacement capacity of the bearings. Additional FEAs are needed to extend the results to bearings of other shapes.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Stability analysis of unbonded fiber reinforced isolators of square shape

Simone Galano et al.

Summary: This paper presents the results of a large series of 3D finite element analyses on square-shaped FREIs. The analyses aimed to provide easy to use design charts for rapidly determining the stability limits of these devices. The output of the analyses is compared to analytical results available in literature, and the limitations of well-known closed-form solutions are discussed.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Probabilistic seismic performance assessment of optimally designed highway bridge isolated by ordinary unbonded elastomeric bearings

Ali Maghsoudi-Barmi et al.

Summary: Recent experimental research has shown that ordinary unbonded steel reinforced elastomeric bearings (SREBs) are an attractive option for seismic isolation of highway bridges, with key parameters including the friction coefficient and isolator aging effects. The results indicate that this base isolation system is effective in reducing earthquake excitation, though isolator aging increases bridge vulnerability.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Nonlinear Dynamic Analysis of Seismically Base-Isolated Structures by a Novel OpenSees Hysteretic Material Model

Nicolo Vaiana et al.

Summary: The novel OpenSees material model for elastomeric isolation bearings offers advantages such as parameter simplification, high accuracy, and not requiring numerical methods. By conducting numerical tests, we demonstrate its effectiveness in calculating the dynamic response of seismically base-isolated structures with elastomeric bearings.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Article Engineering, Geological

Seismic response control of low-rise unreinforced masonry building test model using low-cost and sustainable un-bonded scrap tyre isolator (U-STI)

T. Basar et al.

Summary: The study evaluated the effectiveness of Un-bonded Scrap Tyre Isolators as a seismic isolation system, showing that this system can effectively reduce the seismic response of buildings. The numerical analysis results were validated by experimental results, confirming the practicality of this low-cost isolator.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2021)

Add to Collection

Article Engineering, Geological

Seismic performance of a Low-Cost base isolation system for unreinforced brick Masonry buildings in developing countries

Daniele Losanno et al.

Summary: This study investigates the improvement of earthquake response for typical unreinforced masonry buildings in developing countries using low-cost fiber-reinforced elastomeric isolators (FREIs) developed with recycled rubber. Three-dimensional finite element analyses were conducted on both fixed-base and base-isolated configurations, showing significant reduction in accelerations and interstory drifts of the base-isolated building. The results confirm the effectiveness of the proposed base isolation system in enhancing seismic performance of non-engineered URM buildings under design basis earthquake.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2021)

Add to Collection

Article Engineering, Civil

Finite element modeling of horizontal load-displacement hysteresis loops in unbonded elastomeric isolators

Emad Saremi et al.

Summary: The study introduces a novel finite element model for simulating the dynamic response of unbonded fiber-reinforced elastomeric isolators, utilizing experimental cyclic tests and optimization techniques to capture the non-linear stress-strain relationship and strain-history dependency accurately.

STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

On the response of fiber reinforced elastomeric isolators (FREIs) under bidirectional shear loads

Simone Galano et al.

Summary: This study assesses the response of rectangular FREIs under combined axial and bidirectional shear loads, and shows the effects of the secondary shape factor, axial pressure, and horizontal loading direction on the stability of these devices. The results contribute towards the real implementation of this technology particularly in developing regions of the world.

STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Lateral load performance and seismic demand of unbonded scrap tire rubber pad base isolators

M. B. Zisan et al.

Summary: The study shows that using STRP isolators can effectively reduce lateral deformation of structures during earthquakes, providing good seismic isolation, especially for low-to-medium rise buildings. The research also found that the length-to-width ratio and bearing height significantly influence the performance of the isolators, meeting the performance requirements specified by the ASCE/SEI 7-2010 seismic provisions.

EARTHQUAKE ENGINEERING AND ENGINEERING VIBRATION (2021)

Add to Collection

Article Engineering, Civil

Experimental investigation of unbonded ordinary steel reinforced elastomeric bearings as an isolation system in bridges

Ali Maghsoudi-Barmi et al.

Summary: The study investigates the mechanical properties of unbonded steel-reinforced elastomeric bearings under large shear deformations, showing their ability to withstand such deformations and serve as a cost-effective isolation system. Experimental results demonstrate that the bearings exhibit stable hysteretic response under different vertical loading levels, indicating their potential as a substitute for costly isolators in low to moderate seismic zones or for low-risk short span bridges in developing countries.

STRUCTURES (2021)

Add to Collection

Article Engineering, Chemical

Numerical study on rubber compounds made of reactivated ethylene propylene diene monomer for fiber reinforced elastomeric isolators

Ahmad Basshofi Habieb et al.

Summary: The study found that the proposed regenerated EPDM compounds can be particularly suitable for the production of unbonded FREIs, especially because they are able to exhibit low/moderate tensile stresses at high-shear strain. However, not all regenerated rubber blends fulfill the durability requirements of rubber for seismic isolation after accelerated aging tests, with the durability of the specimens mainly affected by the choice of the regenerated rubber source.

POLYMER ENGINEERING AND SCIENCE (2021)

Add to Collection

Article Engineering, Civil

Experimental performance of unbonded polyester and carbon fiber reinforced elastomeric isolators under bidirectional seismic excitation

Daniele Losanno et al.

ENGINEERING STRUCTURES (2020)

Add to Collection

Article Engineering, Civil

Effects of the long-term aging of glass-fiber reinforced bearings (FRBs) on the seismic response of a base-isolated residential building

A. Calabrese et al.

ENGINEERING STRUCTURES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Tensile Tests for the Improvement of Adhesion between Rubber and Steel Layers in Elastomeric Isolators

Margherita Pauletta et al.

APPLIED SCIENCES-BASEL (2020)

Add to Collection

Article Mechanics

An accurate and computationally efficient uniaxial phenomenological model for steel and fiber reinforced elastomeric bearings

Nicole Vaiana et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Engineering, Civil

Development and experimental behavior of HDR seismic isolators for low-rise residential buildings

Ingrid E. Madera Sierra et al.

ENGINEERING STRUCTURES (2019)

Add to Collection

Article Engineering, Geological

Base seismic isolation of a historical masonry church using fiber reinforced elastomeric isolators

Ahmad Basshofi Habieb et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2019)

Add to Collection

Article Engineering, Civil

Recycled Rubber Fiber Reinforced Bearings (RR-FRBs) as base isolators for residential buildings in developing countries: The demonstration building of Pasir Badak, Indonesia

A. Calabrese et al.

ENGINEERING STRUCTURES (2019)

Add to Collection

Article Engineering, Civil

Method to design fiber-reinforced elastomeric isolators (U-FREIs) and application

Margherita Pauletta

ENGINEERING STRUCTURES (2019)

Add to Collection

Review Engineering, Geological

Fiber-reinforced elastomeric isolators: A review

Niel C. Van Engelen

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2019)

Add to Collection

Article Mechanics

Experimental assessment and analytical modeling of novel fiber-reinforced isolators in unbounded configuration

Daniele Losanno et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Materials Science, Composites

A sustainable molding process for new rubber products from tire recycling

Fabrizio Quadrini et al.

PROGRESS IN RUBBER PLASTICS AND RECYCLING TECHNOLOGY (2019)

Add to Collection

Article Engineering, Industrial

Thermo-mechanical recycling of rubber: Relationship between material properties and specific mechanical energy

Rodrigo Diaz et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

Add to Collection

Article Construction & Building Technology

Mitigation of Seismic Vulnerability of Prototype Low-Rise Masonry Building Using U-FREIs

Van Ngo Thuyet et al.

JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES (2018)

Add to Collection

Article Engineering, Environmental

Recycling of rubber wastes by devulcanization

Lucia Asaro et al.

RESOURCES CONSERVATION AND RECYCLING (2018)

Add to Collection

Article Engineering, Civil

Systematic design of unbonded fiber reinforced elastomeric isolators

Behrang Ehsani et al.

ENGINEERING STRUCTURES (2017)

Add to Collection

Article Engineering, Multidisciplinary

Experimental assessment of utilizing fiber reinforced elastomeric isolators as bearings for bridge applications

Yasser M. Al-Anany et al.

COMPOSITES PART B-ENGINEERING (2017)

Add to Collection

Article Mechanics

A new bi-linear constitutive shear relationship for Unbonded Fiber-Reinforced Elastomeric Isolators (U-FREIs)

Margherita Pauletta et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Construction & Building Technology

Experimental investigation on effects of elastomer components on dynamic and mechanical properties in seismic isolator compounds

Shahram Abedi Koupai et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Mechanics

Fiber reinforced elastomeric isolators for the seismic isolation of bridges

Yasser M. Al-Anany et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Mechanics

Variation of the vertical stiffness of strip-shaped fiber-reinforced elastomeric isolators under lateral loading

Peyman M. Osgooei et al.

COMPOSITE STRUCTURES (2016)

Add to Collection

Article Engineering, Geological

Sensitivity analysis of carbon fiber-reinforced elastomeric isolators based on experimental tests and finite element simulations

Farshad Hedayati Dezfuli et al.

BULLETIN OF EARTHQUAKE ENGINEERING (2014)

Add to Collection

Article Mechanics

Three-dimensional finite element analysis of circular fiber-reinforced elastomeric bearings under compression

Peyman M. Osgooei et al.

COMPOSITE STRUCTURES (2014)

Add to Collection

Article Engineering, Civil

Innovative low-cost recycled rubber-fiber reinforced isolator: Experimental tests and Finite Element Analyses

Mariacristina Spizzuoco et al.

ENGINEERING STRUCTURES (2014)

Add to Collection

Article Engineering, Multidisciplinary

Development and performance evaluation of an innovative low-cost seismic isolator

Tan Ping et al.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2014)

Add to Collection

Article Engineering, Civil

A study on experimental shear behavior of fiber-reinforced elastomeric isolators with various fiber layouts, elastomers and aging conditions

Gaetano Russo et al.

ENGINEERING STRUCTURES (2013)

Add to Collection

Article Mechanics

Carbon fiber-reinforced rectangular isolators with compressible elastomer: Analytical solution for compression and bending

Paolo Angeli et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2013)

Add to Collection

Article Mechanics

Bonded versus unbonded strip fiber reinforced elastomeric isolators: Finite element analysis

Hamid Toopchi-Nezhad et al.

COMPOSITE STRUCTURES (2011)

Add to Collection

Article Engineering, Civil

Shake table study on an ordinary low-rise building seismically isolated with SU-FREIs (stable unbonded-fiber reinforced elastomeric isolators)

Hamid Toopchi-Nezhad et al.

EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS (2009)

Add to Collection

Article Engineering, Civil

An innovative earthquake isolation system using fibre reinforced rubber bearings

Andrea Mordini et al.

ENGINEERING STRUCTURES (2008)

Add to Collection

Article Engineering, Industrial

Design, manufacturing and evaluation of the performance of steel like fiber reinforced elastomeric seismic isolators

Ghasem Dehghani Ashkezari et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)

Add to Collection

Article Construction & Building Technology

Lateral response evaluation of fiber-reinforced neoprene seismic isolators utilized in an unbonded application

Hamid Toopchi-Nezhad et al.

JOURNAL OF STRUCTURAL ENGINEERING (2008)

Add to Collection

Article Engineering, Chemical

Improvement of mechanical properties of rubber compounds using waste rubber/virgin rubber

SY Li et al.

POLYMER ENGINEERING AND SCIENCE (2005)

Add to Collection

Article Polymer Science

Effect of ground rubber powder and devulcanizates on the properties of natural rubber compounds

SY Li et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2005)

Add to Collection

Article Polymer Science

Recycling of rubber waste

AA Yehia

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2004)

Add to Collection

Article Engineering, Industrial

Mechanical and acoustical characteristics of bound rubber granulate

M Sobral et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)

Add to Collection

Article Engineering, Industrial

Hole and lead plug effect on fiber reinforced elastomeric isolator for seismic isolation

BS Kang et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)

Add to Collection

Article Materials Science, Multidisciplinary

A new recycling technology: Compression molding of pulverized rubber waste in the absence of virgin rubber

E Bilgili et al.

JOURNAL OF ELASTOMERS AND PLASTICS (2003)

Add to Collection

Article Engineering, Industrial

Design and manufacturing of fiber reinforced elastomeric isolator for seismic isolation

BY Moon et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)

Add to Collection

Article Polymer Science

A novel method to recycle scrap tires: High-pressure high-temperature sintering

JE Morin et al.

RUBBER CHEMISTRY AND TECHNOLOGY (2002)

Add to Collection

Article Engineering, Industrial

Realistic modelling of earthquake-isolation bearings

S Jerrams et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.