☆ 4.6 Article

Preparation and Characterization of Pulp and Paper Mill Sludge-Activated Biochars Using Alkaline Activation: A Box-Behnken Design Approach

ACS OMEGA (2022)

Related references

Note: Only part of the references are listed.

Article Biochemistry & Molecular Biology

Process Parameters Optimization, Characterization, and Application of KOH-Activated Norway Spruce Bark Graphitic Biochars for Efficient Azo Dye Adsorption

Marine Guy et al.

Summary: In this study, Norway spruce bark was used to prepare activated biochars via chemical activation with potassium hydroxide. The biochars exhibited high specific surface area and excellent adsorption performance towards organic pollutants. Results showed that Norway spruce bark is a promising precursor for producing biochars with very favorable properties.

MOLECULES (2022)

Add to Collection

Article Environmental Sciences

Key Factors for Activated Carbon Adsorption of Pharmaceutical Compounds from Wastewaters: A Multivariate Modelling Approach

Rui M. C. Viegas et al.

Summary: This study used Projection to Latent Structures (PLS) regression to model the adsorption removal of three pharmaceutical compounds (PhCs) from wastewater. The results showed that hydrophobic PhC-PAC interactions play a major role in the adsorption process, with solvation energy and log Kow as the most suitable descriptors. The study also highlighted the competition effects of water dissolved organic matter (DOM) on adsorption capacity.

WATER (2022)

Add to Collection

Article Chemistry, Physical

A comparative study of chemical treatment by MgCl2, ZnSO4, ZnCl2, and KOH on physicochemical properties and acetaminophen adsorption performance of biobased porous materials from tree bark residues

Glaydson S. dos Reis et al.

Summary: In this study, a novel biobased carbon material was synthesized using different single-step pyrolysis chemical methods. The use of different chemical activators resulted in materials with different physicochemical characteristics and acetaminophen adsorption performance. The materials exhibited high specific surface areas and abundant active sites, allowing for ultrafast removal of acetaminophen pollutants. Furthermore, the samples showed good regenerability and efficient removal of synthetic effluents.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Preparation and characterization of banana trunk activated carbon using H3PO4 activation: A rotatable central composite design approach

Mohammed Danish et al.

Summary: Banana trunk waste was used to produce activated carbons with improved surface area and phosphorus atom dispersion. The production process was optimized through a chemical activation method using phosphoric acid. The activated carbon showed a porous surface with high carbon content and good thermal stability.

MATERIALS CHEMISTRY AND PHYSICS (2022)

Add to Collection

Article Environmental Sciences

Tetracycline Degradation by Peroxydisulfate Activated by Waste Pulp/Paper Mill Sludge Biochars Derived at Different Pyrolysis Temperature

Baowei Zhao et al.

Summary: The use of biochar-based catalysts in persulfate activation shows promise in removing emerging and refractory pollutants in wastewater. The effectiveness of biochars derived from waste pulp/paper mill sludge in activating peroxydisulfate for tetracycline degradation was investigated. The results demonstrate that the removal efficiencies of tetracycline increased with the pyrolysis temperatures of the biochars, suggesting that the biochars could be an effective treatment technique for wastewater containing antibiotics.

WATER (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Facile Synthesis of Sustainable Biomass-Derived Porous Biochars as Promising Electrode Materials for High-Performance Supercapacitor Applications

Ravi Moreno Araujo Pinheiro Lima et al.

Summary: Efficient carbon electrodes for supercapacitors were prepared using spruce bark as a biomass precursor. The biochars activated by ZnCl2 showed lower internal resistance and higher areal capacitance.

NANOMATERIALS (2022)

Add to Collection

Article Environmental Sciences

Adsorption of sodium diclofenac in aqueous medium using graphene oxide nanosheets

Ana Carolina Sestito Guerra et al.

Summary: The adsorption of sodium diclofenac on graphene oxide nanosheets was evaluated in this study, showing favorable and spontaneous behavior with decreasing adsorptive capacity at higher temperatures. The study also optimized parameters such as adsorbent mass and solution pH, and proposed an adsorption mechanism based on the interactions between adsorbate and adsorbent.

ENVIRONMENTAL TECHNOLOGY (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Carbon-based electrocatalysts for sustainable energy applications

Jian Wang et al.

Summary: Carbon-based materials have unique advantages for electrocatalysis, and this review provides an overview of the current research status and methods for designing high-performance carbon-based electrocatalysts, offering essential guidance for sustainable energy applications.

PROGRESS IN MATERIALS SCIENCE (2021)

Add to Collection

Article Environmental Sciences

An overview on engineering the surface area and porosity of biochar

Lijian Leng et al.

Summary: Surface area and porosity are crucial physical properties of biochar that significantly impact its applications, with biomass composition and pyrolysis temperature being major influencing factors. Activation, particularly through chemical means, is the most effective way to enhance biochar surface area and porosity, while other treatment methods like carbonaceous materials coating and ball milling can also contribute to improvement. Future research should focus on developing treatment technologies to simultaneously enhance the functionality and porous structure of biochar.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Physiochemical Properties of Biochar and Activated Carbon from Biomass Residue: Influence of Process Conditions to Adsorbent Properties

Mark Gale et al.

Summary: This study evaluated the influence of hydrothermal carbonization or slow pyrolysis process conditions on the physicochemical properties of precursor biochars and activated carbon. It was found that the O/C ratio decreased after chemical activation for HTC biochar but remained the same for SP biochar. Among various activated carbons, the one produced directly from corn stover showed the best adsorption performance for vanillin.

ACS OMEGA (2021)

Add to Collection

Article Energy & Fuels

Hydrothermal Carbonization of Chemical and Biological Pulp Mill Sludges

Clara Lisseth Mendoza Martinez et al.

Summary: Modern pulp mills generate various by-products and waste streams, some can be recycled while others, such as chemical and biological sludges, are hard to dispose of. Tightening waste disposal legislation and the need to increase process efficiencies are driving the search for environmentally friendly and energy-efficient techniques for pulp mill sludge treatment.

ENERGIES (2021)

Add to Collection

Review Energy & Fuels

Hydrogen storage characteristics of bio-based porous carbons of different origin: A comparative review

Turkan Kopac

Summary: Activated carbons from biomass sources are attracting attention due to their superior properties for hydrogen storage applications. This comparative evaluation focuses on the differences in hydrogen storage performances of various carbon materials prepared from biomass sources, considering factors such as precursors and activating agents. The study provides an overview of the preparation, characterization, and analysis methods of biosorbents from different types of biomass, as well as perspectives and challenges in the field.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Preparation and Application of Efficient Biobased Carbon Adsorbents Prepared from Spruce Bark Residues for Efficient Removal of Reactive Dyes and Colors from Synthetic Effluents

Glaydson Simoes dos Reis et al.

Summary: Biobased carbon materials were produced from Norway spruce bark using single-step chemical activation and pyrolysis. The KOH-BBC had higher surface area, larger pore volume, and more hydrophilic surface compared to ZnCl2-BBC, but with lower carbon yield. Both BBCs showed high efficiency in removing dyes and treating synthetic effluents, with KOH-BBC being superior in purification ability.

COATINGS (2021)

Add to Collection

Article Energy & Fuels

Application of design of experiments (DoE) for optimised production of micro- and mesoporous Norway spruce bark activated carbons

Glaydson Simoes dos Reis et al.

Summary: Norway spruce bark was used as a precursor for preparing activated carbon using zinc chloride as a chemical activator. The optimal conditions for achieving high specific surface area, mesopore surface area, and micropore surface area were determined. The activated carbons showed predominant mesoporous structures and were successfully tested for adsorption of sodium diclofenac from aqueous solutions.

BIOMASS CONVERSION AND BIOREFINERY (2021)

Add to Collection

Article Engineering, Multidisciplinary

Optimization of Preparation Conditions of Sewage sludge based Activated Carbon

N. M. Y. Almahbashi et al.

Summary: This study successfully produced activated carbon from sewage sludge by optimizing chemical activation parameters, achieving a maximum surface area of 377.7 m(2)/g, with contact time being identified as the most important parameter during the optimization process.

AIN SHAMS ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Environmental

Single-step pyrolysis for producing magnetic activated carbon from tucuma (Astrocaryum aculeatum) seed and nickel(II) chloride and zinc(II) chloride. Application for removal of nicotinamide and propanolol

Pascal S. Thue et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection

Article Environmental Sciences

Carbon dioxide capture in biochar produced from pine sawdust and paper mill sludge: Effect of porous structure and surface chemistry

Avanthi Deshani Igalavithana et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis and characterization of activated carbon from Bambusa vulgaris striate using two-step KOH activation

Eka Marya Mistar et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Sustainable Biomass Activated Carbons as Electrodes for Battery and Supercapacitors-A Mini-Review

Glaydson Simoes dos Reis et al.

NANOMATERIALS (2020)

Add to Collection

Article Energy & Fuels

Insight into KOH activation mechanism during biomass pyrolysis: Chemical reactions between O-containing groups and KOH

Wei Chen et al.

APPLIED ENERGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Removal of pharmaceuticals from municipal wastewater by adsorption onto pyrolyzed pulp mill sludge

R. N. Coimbra et al.

ARABIAN JOURNAL OF CHEMISTRY (2019)

Add to Collection

Article Thermodynamics

Environmental performance of end-of-life handling alternatives for paper-and-pulp-mill sludge: Using digestate as a source of energy or for biochar production

Ali Mohammadi et al.

ENERGY (2019)

Add to Collection

Article Chemistry, Physical

Fabrication of polyethylenimine-functionalized sodium alginate/cellulose nanocrystal/polyvinyl alcohol core-shell microspheres ((PVA/SA/CNC)@PEI) for diclofenac sodium adsorption

Lihong Fan et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Efficient acetaminophen removal from water and hospital effluents treatment by activated carbons derived from Brazil nutshells

Diana R. Lima et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2019)

Add to Collection

Article Chemistry, Physical

Box-Behnken design approach towards optimization of activated carbon synthesized by co-pyrolysis of waste polyester textiles and MgCl2

Zhihang Yuan et al.

APPLIED SURFACE SCIENCE (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Optimization of activated carbon preparation from cassava stem using response surface methodology on surface area and yield

Nurul Syuhada Sulaiman et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Acoustics

Wastewater treatment for Amoxicillin removal using magnetic adsorbent synthesized by ultrasound process

Khadijeh Jafari et al.

ULTRASONICS SONOCHEMISTRY (2018)

Add to Collection

Article Multidisciplinary Sciences

Characterization, kinetic, thermodynamic and isotherm data for diclofenac removal from aqueous solution by activated carbon derived from pine tree

Dariush Naghipour et al.

DATA IN BRIEF (2018)

Add to Collection

Article Engineering, Environmental

Dewatering of pulp and paper mill biosludge and primary sludge

Torsten Meyer et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2018)

Add to Collection

Article Thermodynamics

The use of design of experiments for the evaluation of the production of surface rich activated carbon from sewage sludge via microwave and conventional pyrolysis

Glaydson Simoes dos Reis et al.

APPLIED THERMAL ENGINEERING (2016)

Add to Collection

Article Agricultural Engineering

A novel method to tailor the porous structure of KOH-activated biochar and its application in capacitive deionization and energy storage

Amir Mehdi Dehkhoda et al.

BIOMASS & BIOENERGY (2016)

Add to Collection

Article Chemistry, Physical

Preparation of novel adsorbents based on combinations of polysiloxanes and sewage sludge to remove pharmaceuticals from aqueous solutions

Glaydson Simoes dos Reis et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Antibiotic amoxicillin removal from aqueous solution using magnetically modified graphene nanoplatelets

Ozge Kerkez-Kuyumcu et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2016)

Add to Collection

Article Chemistry, Physical

Adsorption of sodium diclofenac on graphene: a combined experimental and theoretical study

I. M. Jauris et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2016)

Add to Collection

Article Engineering, Chemical

Synthesis of carbon xerogels and their application in adsorption studies of caffeine and diclofenac as emerging contaminants

S. Alvarez et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2015)

Add to Collection

Article Engineering, Environmental

Microwave-assisted activated carbon from cocoa shell as adsorbent for removal of sodium diclofenac and nimesulide from aqueous effluents

Caroline Saucier et al.

JOURNAL OF HAZARDOUS MATERIALS (2015)

Add to Collection

Article Environmental Sciences

Characterization and Feasibility Assessment of Recycled Paper Mill Sludges for Land Application in Relation to the Environment

Rosazlin Abdullah et al.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2015)

Add to Collection

Article Engineering, Environmental

Amoxicillin adsorption on microwave prepared activated carbon from Arundo donax Linn: Isotherms, kinetics, and thermodynamics studies

Marwa A. Chayid et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2015)

Add to Collection

Article Agricultural Engineering

Optimized preparation for large surface area activated carbon from date (Phoenix dactylifera L.) stone biomass

Mohammed Danish et al.

BIOMASS & BIOENERGY (2014)

Add to Collection

Article Engineering, Chemical

Tailoring surfaces of hybrid ceramics for gas adsorption - From alkanes to CO2

Torsten Prenzel et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2014)

Add to Collection

Article Forestry

Optimization study for preparation of activated carbon from Acacia mangium wood using phosphoric acid

Mohammed Danish et al.

WOOD SCIENCE AND TECHNOLOGY (2014)

Add to Collection

Article Multidisciplinary Sciences

Experimental Design Methodology for the Preparation of Activated Carbon from Sewage Sludge by Chemical Activation Process

Dania Sheha et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2013)

Add to Collection

Article Engineering, Environmental

Preparation, characterization and adsorption potential of the NH4Cl-induced activated carbon for the removal of amoxicillin antibiotic from water

Gholamreza Moussavi et al.

CHEMICAL ENGINEERING JOURNAL (2013)

Add to Collection

Article Environmental Sciences

The removal of amoxicillin from wastewater using organobentonite

Shuang Xing Zha et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2013)

Add to Collection

Article Chemistry, Applied

Pyrolyzed polysiloxane membranes with tailorable hydrophobicity, porosity and high specific surface area

Torsten Prenzel et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2013)

Add to Collection

Article Engineering, Environmental

Removal of diclofenac sodium from aqueous solution by Isabel grape bagasse

Marjore Antunes et al.

CHEMICAL ENGINEERING JOURNAL (2012)

Add to Collection

Article Biochemistry & Molecular Biology

Chemical and leaching properties of paper mill sludge

Toivo Kuokkanen et al.

CHEMICAL SPECIATION AND BIOAVAILABILITY (2008)

Add to Collection

Article Biotechnology & Applied Microbiology

Adsorption of amoxicillin on chitosan beads:: Kinetics, equilibrium and validation of finite bath models

WS Adriano et al.

BIOCHEMICAL ENGINEERING JOURNAL (2005)

Add to Collection

Article Chemistry, Physical

Optimization of conditions for the preparation of activated carbons from olive-waste cakes

A Bacaoui et al.

CARBON (2001)

Add to Collection

Article Chemistry, Analytical

Mesoporous activated carbon from agricultural byproducts

P Galiatsatou et al.

MIKROCHIMICA ACTA (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.