4.7 Article

Separation of TiO2 particles from suspension using indigenous low-cost ceramic microfiltration membrane br

Journal

JOURNAL OF WATER PROCESS ENGINEERING
Volume 49, Issue -, Pages -

Publisher

ELSEVIER
DOI: 10.1016/j.jwpe.2022.103123

Keywords

Kaolin; Ceramic membrane; Microfiltration; TiO2; Turbidity

Funding

  1. Council of Scientific and Industrial Research (CSIR), Government of India [CSIR/22(0740)/17/EMR-II]

Ask authors/readers for more resources

This study developed a tubular ceramic membrane using low-cost clays and a binder for the separation of TiO2 nanoparticles from water. The membrane showed excellent water permeability and separation efficiency, making it suitable for the removal of TiO2.
The increased use of TiO2 nanoparticles in manufacturing and commercial products has led to environmental contamination and health issues. This study aimed to apply tubular ceramic membrane fabricated using low-cost clays (kaolin, quartz) along with hydroxypropyl methylcellulose binder for the separation of TiO2 nanoparticles from water. The prepared tubular ceramic membrane exhibited excellent water permeability (1.4945 x107 m3/ m2s kPa) with an average pore size of 0.178 mu m and porosity of 40 %. Cross flow microfiltration experiments using TiO2 nanoparticles suspension were performed by varying the applied pressure (138-414 kPa), cross flow velocity (2.41 x103 - 5.63 x103 m/s), pH (4-11) and feed concentration (0.05-1 wt%). The permeate flux increased linearly with an increase in the pressure as well as cross flow velocity with a maximum permeate flux of 4.24 x105 m3/m2s at 414 kPa, whereas a reduction in permeate flux was observed with increasing feed concentration of TiO2. The membrane displayed 100 % separation efficiency at all the investigated pressures. Furthermore, the membrane fouling mechanism during the microfiltration process was analyzed using resistance-in-series model. Results demonstrated that filtration resistance (Rf) and total resistance (Rt) decreased with increasing cross flow velocity from 2.41 x103 m/s to 5.63 x103 m/s, whereas filtration resistance remained constant at high pressures. The estimated membrane cost is 253 USD/m2 based on raw materials, energy consumption, manpower and equipment cost. These promising results elucidated the suitability of tubular ceramic membrane towards the removal of TiO2 from wastewater

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available