☆ 4.7 Article

papers Electrolyte-philic and thermal-resistant polyimide separator enhances the performance of flexible silicon/carbon nanofibers for lithium-ion batteries

JOURNAL OF ENERGY STORAGE (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Novel Thermotolerant and Flexible Polyimide Aerogel Separator Achieving Advanced Lithium-Ion Batteries

Yurui Deng et al.

Summary: A novel thermotolerant polyimide aerogel (PIA) separator with outstanding porosity and electrolyte absorption is designed, showing significant improvement in electrochemical performance and stability of lithium-ion batteries (LIBs). The PIA separators also exhibit higher thermal runaway temperatures for pouch batteries compared to traditional separators.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Simultaneously Blocking Chemical Crosstalk and Internal Short Circuit via Gel-Stretching Derived Nanoporous Non-Shrinkage Separator for Safe Lithium-Ion Batteries

Youzhi Song et al.

Summary: A nanoporous non-shrinkage separator (GS-PI) was fabricated to address the thermal runaway issue in high-energy-density lithium-ion batteries, preventing internal short circuits and inhibiting chemical crosstalk and associated exothermic reactions.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Lithium substituted poly(amic acid) as a water-soluble anode binder for high-temperature pre-lithiation

Tianyu Zhu et al.

Summary: A water-soluble high-temperature binder has been developed in this study, which can be used in industrial pre-lithiation processes and large scale electrode manufacturing, with exceptional thermal stability and mechanical flexibility.

JOURNAL OF POWER SOURCES (2022)

Add to Collection

Article Chemistry, Physical

A multifunctional polyimide enabled high performance silicon composite anode materials for Li-Ion batteries

Xiang Li et al.

Summary: In this study, a conjugate carbonyl polyimide and nano-silicon composite was designed and synthesized to address the challenges of rapid capacity fading and complicated electrode material preparation in silicon-based electrodes for lithium-ion batteries. This composite exhibited a relative high specific capacity and excellent cycling stability, as well as improved electrode kinetics and electrochemical performance.

JOURNAL OF POWER SOURCES (2022)

Add to Collection

Article Energy & Fuels

Regulating lithium-ion flux in the solid electrolyte interphase layer to prevent lithium dendrite growth on lithium metal anode

Behnam Ghanbarzadeh et al.

Summary: Using argon and oxygen plasma to modify the polypropylene separator surface can prevent lithium dendrite growth and form a thin and uniform SEI layer by increasing the negative surface charge.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Energy & Fuels

Influence of electrolyte presence on the vibration behavior of a Li-ion pouch cell and on the mechanical characteristics of its incorporated Al2O3-coated polyolefin separator

Patrick Kolm et al.

Summary: This paper investigates the influence of electrolytes on the mechanical behavior of a commercial pouch cell and its coated separator through compression and tensile tests. Modal analyses were performed to determine the damping behavior and dynamic stiffness of wet and dry cells.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Review Chemistry, Applied

Polyimide separators for rechargeable batteries

Ziheng Lu et al.

Summary: Separators are essential components of modern electrochemical energy storage devices, with thermally stable polyimide separators offering a promising solution to the safety concerns of lithium-ion batteries. Recent research has focused on molecular design and microstructural control of polyimide separators, with advances also in applications for advanced chemistries beyond LIBs such as lithium-sulfur, lithium-metal, and solid-state batteries.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Formulating a New Electrolyte: Synergy between Low-Polar and Non-polar Solvents in Tailoring the Solid Electrolyte Interface for the Silicon Anode

Si-Yu Pan et al.

Summary: A low-polarity electrolyte was formulated in this study, which improved the solvation behaviors of lithium ions and resulted in a SEI layer rich in LiF with a stable structure to enhance the performance of lithium-ion batteries. An anode based on silicon nanoparticles in this low-polarity electrolyte exhibited a capacity of 1491 mAh g(-1) after 200 cycles, outperforming those in commercial polar electrolytes.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Amorphous VO2: A Pseudocapacitive Platform for High-Rate Symmetric Batteries

Dongliang Chao et al.

Summary: The study demonstrates that amorphous VO2 shows superior Na+ insertion properties compared to crystalline VO2(B) and its linear voltage characteristic over 3V range allows for the fabrication of symmetric Na-ion batteries.

ADVANCED MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Characteristics and electrochemical performances of silicon/carbon nanofiber/graphene composite films as anode materials for binder-free lithium-ion batteries

Ruye Cong et al.

Summary: The interfacial study focused on a Silicon/Carbon Nanofiber/Graphene composite as a potentially high-performance anode for rechargeable lithium-ion batteries. The composite films showed improved electron conductivity and stability during charge/discharge processes, resulting in a specific capacity of 1894.54 mAh/g and maintained reversible capacity of 964.68 mAh/g after 100 cycles. The Si/CNF/rGO composite electrode exhibited higher capacity and stability compared to an Si/rGO composite electrode.

SCIENTIFIC REPORTS (2021)

Add to Collection

Article Chemistry, Physical

In Situ Generated Carbon Nanosheet-Covered Micron-Sized Porous Si Composite for Long-Cycling Life Lithium-Ion Batteries

Wen Luo et al.

Summary: A facile strategy to obtain a silicon-based composite material covered with carbon nanosheet templates was proposed, resulting in enhanced electrolyte transfer and long-term stability, making it suitable for use as an anode material for lithium-ion batteries. This work provides a templated idea for long-term stable LIBs.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

High Cycling Stability of the LiNi0.8Co0.1Mn0.1O2 Cathode via Surface Modification with Polyimide/Multi-Walled Carbon Nanotubes Composite Coating

Guojun Zha et al.

Summary: The modified Ni-rich LiNi0.8Co0.10Mn0.1O2 (NCM811) cathode as PI3-NCM811 shows significantly improved cycling stability and delayed secondary crystal cracking. The PI3-NCM811 cathode exhibits better capacity retention after 500 cycles compared to NCM811.

SMALL (2021)

Add to Collection

Article Energy & Fuels

Customizing Active Materials and Polymeric Binders: Stern Requirements to Realize Silicon-Graphite Anode Based Lithium-Ion Batteries.

Niloofar Hamzelui et al.

Summary: The study investigated the effect of Si to Gr ratio and LiPAA to CMC ratio in silicon-graphite blend anode LIB cells, highlighting the importance of optimizing the use of mixed polymeric binders for performance enhancement. Among various ratios tested, a blend anode with 20% Si and a LiPAA to CMC ratio of 2.27:7.73 showed superior battery performance in terms of cycle life, capacity retention, and coulombic efficiency.

JOURNAL OF ENERGY STORAGE (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Dicyanotriphenylamine-Based Polyimides as High-Performance Electrodes for Next Generation Organic Lithium-Ion Batteries

Kristin B. Labasan et al.

Summary: Recent studies have investigated aromatic polyimide (PI) derivatives as redox-active electrode materials for Li-ion batteries due to their high thermal stability, excellent solvent resistance, and good electrical properties. Two PI derivatives, TPA-NTCPI and TPA-PMPI, synthesized from a newly developed DiCN-TPA monomer, show promising electrochemical performance with stable specific capacities up to 1000 cycles for the cathode and high specific capacities up to 1600 mAh g(-1) for the anode after 100 cycles. These results suggest that TPA-NTCPI and TPA-PMPI could be potential organic electrode materials for next generation Li-ion batteries.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Editorial Material Energy & Fuels

Silicon anodes

Yi Cui

NATURE ENERGY (2021)

Add to Collection

Article Energy & Fuels

Subnano-sized silicon anode via crystal growth inhibition mechanism and its application in a prototype battery pack

Jaekyung Sung et al.

Summary: Silicon-based anodes are a promising alternative to commonly used graphite anodes in commercial batteries. Researchers have developed a synthesis route for silicon anodes consisting of subnanometre-sized particles, enhancing cycling stability and Coulombic efficiency. The practical application of the fabricated energy storage system demonstrates high cycle life and calendar life retention percentages.

NATURE ENERGY (2021)

Add to Collection

Article Nanoscience & Nanotechnology

In Situ Formed Weave Cage-Like Nanostructure Wrapped Mesoporous Micron Silicon Anode for Enhanced Stable Lithium-Ion Battery

Chenhui Fang et al.

Summary: By using in situ reduction and template assembly strategy, a weave cage-like carbon nanostructure was successfully fabricated to wrap micron-sized mesoporous silicon, forming a robust composite structure. This structure can significantly improve the electrochemical performance and structural stability of micron-sized mesoporous silicon.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Probing the Reactivity of the Active Material of a Li-Ion Silicon Anode with Common Battery Solvents

Binghong Han et al.

Summary: Replacing traditional graphite anodes with silicon in lithium-ion batteries can greatly improve energy density, but the rapid capacity fading due to silicon's large volume change and high reactivity with electrolytes is a challenge. By studying the reaction between lithiated silicon and different electrolyte solvents, researchers identified more stable options and developed EC-free electrolytes to enhance performance of silicon electrodes. Understanding the fundamental chemical and electrochemical stability differences between silicon and graphite anodes can guide the development of electrolytes for more effective passivation of lithiated silicon surfaces.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

A Novel Tin-Bonded Silicon Anode for Lithium-Ion Batteries

Zhe Dong et al.

Summary: A novel Sn-bonded Si anode is proposed, showing superior cyclic stability and high rate performance by improving electronic conductivity and enhancing adhesive strength of the electrode.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Review Nanoscience & Nanotechnology

Undervalued Roles of Binder in Modulating Solid Electrolyte Interphase Formation of Silicon-Based Anode Materials

Lin Han et al.

Summary: Silicon is promising for lithium storage due to its high capacity and low working platform, but volume changes during cycling lead to material pulverization and electrode cracking. A robust binder is essential for maintaining Si electrode integrity, yet its role in modulating the chemical composition and spatial distribution of the SEI layer is often overlooked.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Energy & Fuels

Structure Design and Performance of the Graphite/Silicon/Carbon Nanotubes/Carbon (GSCC) Composite as the Anode of a Li-Ion Battery

Yuehua Huang et al.

Summary: The combinational design of graphite/silicon/carbon nanotubes/carbon composites with hierarchical structure addresses the challenges faced by silicon-based anode materials in lithium-ion batteries, such as poor electrical conductivity and volume change. The electrode prepared shows promising performance and potential for commercial application through comprehensive design.

ENERGY & FUELS (2021)

Add to Collection

Article Chemistry, Physical

Encapsulating Silicon Particles by Graphitic Carbon Enables High-performance Lithium-ion Batteries

Jinfu Zhao et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Sulfur-Based Aqueous Batteries: Electrochemistry and Strategies

Jiahao Liu et al.

Summary: This article focuses on constructing a theory-to-application methodology for aqueous sulfur-based batteries. Research reveals the complexity in the electrochemistry of aqueous sulfur-based batteries, which poses challenges and potential for future development. Further exploration in both theory and practice is needed for the future development direction.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Add to Collection

Article Multidisciplinary Sciences

Carbon-free high-loading silicon anodes enabled by sulfide solid electrolytes

Darren H. S. Tan et al.

Summary: The research successfully achieved stable operation of silicon anodes by using the interface passivating properties of sulfide solid electrolytes. Analysis showed that this approach eliminates continuous interfacial growth and irreversible lithium losses. The promising performance of microsilicon full cells can be attributed to the ideal interface properties between microsilicon and sulfide electrolytes and the unique chemomechanical behavior of the lithium-silicon alloy.

SCIENCE (2021)

Add to Collection

Review Multidisciplinary Sciences

Production of high-energy Li-ion batteries comprising silicon-containing anodes and insertion-type cathodes

Gebrekidan Gebresilassie Eshetu et al.

Summary: The authors discuss the use of silicon-containing anodes and insertion-type cathodes in battery systems, which have attracted significant interest for electric vehicles and renewable energy sources. However, these high-energy systems are limited by their complex chemistry and intrinsic drawbacks, requiring corresponding mitigating strategies.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Energy & Fuels

Calendar aging of silicon-containing batteries

Josefine D. McBrayer et al.

Summary: Silicon-containing batteries are gaining popularity in the mass market, but the calendar aging behaviors of silicon anodes have not been well studied. Researchers are discussing the challenges surrounding the long-term stability of silicon anodes for lithium-ion batteries, especially in high-energy batteries for automotive applications. Future research should focus on assessing and mitigating the time-dependent degradation of silicon-containing batteries to fully realize their benefits.

NATURE ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

3D periodic polyimide nano-networks for ultrahigh-rate and sustainable energy storage

Youngjin Ham et al.

Summary: Organic molecules with redox-active motifs are gaining attention as next-generation electrodes for sustainable energy storage, with a focus on engineering three-dimensional structures to meet practical requirements. A fabrication strategy has been demonstrated to create high-performance organic electrodes, achieving high reversible capacity and retention rates at fast charging rates. This opens up new opportunities for high-performance organic batteries with unprecedented lithium-ion storage rates.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Porosity- and Graphitization-Controlled Fabrication of Nanoporous Silicon@Carbon for Lithium Storage and Its Conjugation with MXene for Lithium-Metal Anode

Yongling An et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Nano/Microstructured Silicon-Carbon Hybrid Composite Particles Fabricated with Corn Starch Biowaste as Anode Materials for Li-Ion Batteries

Hyun Jung Kwon et al.

NANO LETTERS (2020)

Add to Collection

Article Multidisciplinary Sciences

A new approach to both high safety and high performance of lithium-ion batteries

Shanhai Ge et al.

SCIENCE ADVANCES (2020)

Add to Collection

Article Chemistry, Analytical

Polyimide binder for a high-energy-density composite anode electrode with graphite and silicon

Meihua Hong et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2020)

Add to Collection

Article Multidisciplinary Sciences

Hierarchical porous silicon structures with extraordinary mechanical strength as high-performance lithium-ion battery anodes

Haiping Jia et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Multidisciplinary Sciences

Conjugation with carbon nanotubes improves the performance of mesoporous silicon as Li-ion battery anode

Timo Ikonen et al.

SCIENTIFIC REPORTS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Three-Dimensional Hierarchical Porous Structures Constructed by Two-Stage MXene-Wrapped Si Nanoparticles for Li-Ion Batteries

Xin Li et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Engineering, Environmental

High performance lithium-ion capacitors based on LiNbO3-arched 3D graphene aerogel anode and BCNNT cathode with enhanced kinetics match

Hehe Jiang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Polymer Science

Rational synthesis of silicon into polyimide-derived hollow electrospun carbon nanofibers for enhanced lithium storage

Fan Wang et al.

E-POLYMERS (2020)

Add to Collection

Article Chemistry, Physical

Hierarchical N-doped carbon nanosheets submicrospheres enable superior electrochemical properties for potassium ion capacitors

Meiqi Liu et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Electrochemical Performance of an Ultrathin Surface Oxide- Modulated Nano-Si Anode Confined in a Graphite Matrix for Highly Reversible Lithium-Ion Batteries

Reddyprakash Maddipatla et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Two-Dimensional Silicon/Carbon from Commercial Alloy and CO2 for Lithium Storage and Flexible Ti3C2Tx MXene-Based Lithium-Metal Batteries

Yongling An et al.

ACS NANO (2020)

Add to Collection

Article Multidisciplinary Sciences

Reversible planar gliding and microcracking in a single-crystalline Ni-rich cathode

Yujing Bi et al.

SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

A sandwich-like silicon -carbon composite prepared by surface-polymerization for rapid lithium-ion storage

Runsheng Gao et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A binder-free high silicon content flexible anode for Li-ion batteries

Hanwei Wang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A Facile Strategy to Construct Silver-Modified, ZnO-Incorporated and Carbon-Coated Silicon/Porous-Carbon Nanofibers with Enhanced Lithium Storage

Jiaxin Li et al.

SMALL (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Simultaneous Encapsulation of Nano-Si in Redox Assembled rGO Film as Binder-Free Anode for Flexible/Bendable Lithium-Ion Batteries

Xin Cai et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Graphene Caging Silicon Particles for High-Performance Lithium-Ion Batteries

Ping Nie et al.

SMALL (2018)

Add to Collection

Article Chemistry, Physical

Enhanced Cycle Performance of Polyimide Cathode Using a Quasi-Solid-State Electrolyte

Yadi Zhang et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2018)

Add to Collection

Article Chemistry, Physical

Rigid Polyimide Buffering Layer Enabling Silicon Nanoparticles Prolonged Cycling Life for Lithium Storage

Ruirui Fu et al.

ACS APPLIED ENERGY MATERIALS (2018)

Add to Collection

Article Multidisciplinary Sciences

Highly elastic binders integrating polyrotaxanes for silicon microparticle anodes in lithium ion batteries

Sunghun Choi et al.

SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

Highly stable lithium ion capacitor enabled by hierarchical polyimide derived carbon microspheres combined with 3D current collectors

Jiangmin Jiang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Chemistry, Physical

Mesoporous Silicon Anodes by Using Polybenzimidazole Derived Pyrrolic N-Enriched Carbon toward High-Energy Li-Ion Batteries

Ping Nie et al.

ACS ENERGY LETTERS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

High Areal Capacity Si/LiCoO2 Batteries from Electrospun Composite Fiber Mats

Ethan C. Self et al.

CHEMSUSCHEM (2017)

Add to Collection

Article Electrochemistry

Polyimide Binder: A Facile Way to Improve Safety of Lithium Ion Batteries

Guannan Qian et al.

ELECTROCHIMICA ACTA (2016)

Add to Collection

Article Chemistry, Multidisciplinary

All-Integrated Bifunctional Separator for Li Dendrite Detection via Novel Solution Synthesis of a Thermostable Polyimide Separator

Dingchang Lin et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Add to Collection

Review Chemistry, Physical

Electrospun nanofibers as a platform for advanced secondary batteries: a comprehensive review

Ji-Won Jung et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Hierarchical electrode design of high-capacity alloy nanomaterials for lithium-ion batteries

Hui Zhao et al.

NANO TODAY (2015)

Add to Collection

Article Nanoscience & Nanotechnology

High Capacity and High Density Functional Conductive Polymer and SiO Anode for High-Energy Lithium-Ion Batteries

Hui Zhao et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Add to Collection

Article Nanoscience & Nanotechnology

A pomegranate-inspired nanoscale design for large-volume-change lithium battery anodes

Nian Liu et al.

NATURE NANOTECHNOLOGY (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Carbon-Silicon Core-Shell Nanowires as High Capacity Electrode for Lithium Ion Batteries

Li-Feng Cui et al.

NANO LETTERS (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.