4.6 Article

Tribological study on the biodiesel produced from waste cooking oil, waste cooking oil blend with Calophyllum inophyllum and its diesel blends on lubricant oil

Journal

ENERGY REPORTS
Volume 8, Issue -, Pages 1578-1590

Publisher

ELSEVIER
DOI: 10.1016/j.egyr.2021.12.059

Keywords

Applied tribology; Lubricant application; Lubricant waste; Oil production

Categories

Funding

  1. AAIBE Chair of Renewable [201801 KETTHA]
  2. Ministry of Education, Culture, Research and Technology [B/267/PL5/PT.01.05/2021]
  3. Politeknik Negeri Medan, Medan, Indonesia [B/189/PL5/PT.01.03/2021]
  4. Universiti Tenaga Nasional, Malaysia

Ask authors/readers for more resources

This study investigates the friction and wear performance of biodiesel produced from waste cooking oil blended with Calophyllum inophyllum oil in lubricating oils. The results demonstrate that the blend of waste cooking oil and Calophyllum inophyllum oil with biodiesel-diesel blend has the lowest friction coefficient and provides effective protection. The study suggests that using this biodiesel as an additive in petroleum-based lubricants can improve automotive engine performance.
Biodiesel or biodiesel-diesel fuel is the current fuel used to power transportation engines. Contamination on lubricating oil is a common issue due to leakage or extensive use of engines. This study explores the lubricant oil blend's friction and wear with the biodiesel derived from waste cooking oil, waste cooking oil blend withCalophyllum inophyllum oil, and biodiesel-diesel blend. The blending of biodiesels and biodiesel-diesel blend with lubricant oil varies from 5% to 25% of biodiesels and biodiesel-diesel with 95% to 75% of lubricating oil based on volume ratio. The test was conducted using a four-ball tribotester according to the ASTM D 4172. The result showed that blending of BWCIL75 with biodiesel-diesel has the lowest friction coefficient (0.072) among tested oil. The wear scar on the ball bearing lubricated with the blending mixture showed an acceptable diameter value. The wear morphology has shown that a worn surface with black spots provides more protection to the tested ball. The result found that fatty acid contained in the biodiesel and the low viscosity of biodiesel significantly reduced the frictional coefficient of the lubricating oil and worked as wear prevention. Mechanical efficiency of machinery component favour low coefficient of friction. This study indicated that biodiesel produced from waste cooking oil blended with Calophyllum inophyllum oil shows better lubricity and can be used as an additive to petroleum-based lubricant for better automotive engine performance. (c) 2021 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.6
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available