4.6 Article

The impact of drying temperature on the crystalline domain and the electrochemical performance of NiCoAl-LDH

Journal

ENERGY REPORTS
Volume 8, Issue -, Pages 1151-1158

Publisher

ELSEVIER
DOI: 10.1016/j.egyr.2021.12.042

Keywords

Williamson-Hall analysis; Crystallite size; Drying temperature; Cyclic voltammetry

Categories

Funding

  1. University of South Africa (UNISA)

Ask authors/readers for more resources

This study investigated the effect of drying temperature on the crystallite size and lattice strain of NiCoAl-LDH and its impact on the electrochemical properties. The results showed that drying temperature significantly influenced the crystalline structure and electrochemical properties of NiCoAl-LDH. The best electrochemical performance was observed at a drying temperature of 80 degrees C.
This work has investigated the effect of drying temperature on the crystallite size and lattice strain of NiCoAl-LDH using the Williamson-Hall (W-H) method and tracked the impact of the changes thereof on the electrochemical properties. During the experiments, the drying time was kept unchanged, while the temperature was varied from 70 degrees C, 80 degrees C to 90 degrees C. From the X-ray diffractometer (XRD), Fourier-transform infrared spectroscopy (FTIR), Cyclic voltammetry (CV), and Electrochemical impedance spectroscopy (EIS) results, it was found that the drying temperature had greatly influenced the crystalline structure, the interlamellar domain as well as the electrochemical properties of NiCoAl-LDH. An increment in the crystallite sizes was observed from 4.971 to 12.334 nm as the drying temperature increased from 70 to 80 degrees C and dropped to 7.681 nm when it reached 90 degrees C. Similarly, an increase in the specific capacitance was recorded from 1158.26 to 4180.16 Fg(-1) at 10 mVs(-1) as the drying temperature went up from 70 to 80 degrees C and dropped to 3775.77 Fg(-1) at 10 mVs(-1) when the drying temperature increased to 90 degrees C. Moreover, the sample dried at 80 degrees C exhibited low internal resistance compared to its counterpart. The best electrochemical performance of the sample dried at 80 degrees C could be attributed to the larger size of its crystallite. This leads to the conclusion that the electrochemical performance of NiCoAl-LDH could be crystallite size-dependent. Finally, it was proved that the drying temperature (80 degrees C-12 h) is the best for the drying stage of NiCoAl-LDH. (C) 2021 The Author(s). Published by Elsevier Ltd.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.6
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available