☆ 4.6 Article

Design and numerical investigation of multi-channel cooling plate for proton exchange membrane fuel cell

ENERGY REPORTS (2022)

Related references

Note: Only part of the references are listed.

Review Thermodynamics

Thermal management of polymer electrolyte membrane fuel cells: A critical review of heat transfer mechanisms, cooling approaches, and advanced cooling techniques analysis

Yicheng Huang et al.

Summary: Thermal management is crucial for improving the efficiency and durability of PEMFCs. This paper comprehensively reviews the heat transfer mechanisms and cooling techniques available for PEMFCs. It is found that adopting proper cooling methods/thermal management strategies can significantly enhance the performance of fuel cell systems.

ENERGY CONVERSION AND MANAGEMENT (2022)

Add to Collection

Article Engineering, Environmental

Thermochemical heat storage system for preventing battery thermal runaway propagation using sodium acetate trihydrate/expanded graphite

Jiahao Cao et al.

Summary: This study proposes a novel passive battery thermal management system based on inorganic composite phase change material (CPCM) – sodium acetate trihydrate (SAT)/expanded graphite (EG). The effectiveness of SAT/EG in inhibiting thermal runaway (TR) propagation of lithium-ion batteries (LIBs) is experimentally and numerically verified. The findings offer valuable guidance for analyzing the thermal behaviors of other decomposition reactions.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

High thermal conductivity and mechanical properties of Si@Graphite/Aluminum nitride/aluminum composites for high-efficiency thermal management

Rui Fan et al.

Summary: A new route was adopted to prepare graphite flakes/aluminum composites via vacuum pressure infiltration process. Aluminum nitride particles were used as supporting particles, improving the penetration of the molten aluminum matrix. Samples with SiC coating exhibited excellent thermal conductivity and bending strength, with a reduction in the coefficient of thermal expansion.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Thermodynamics

Three-dimensional simulation of different flow fields of proton exchange membrane fuel cell using a multi-phase coupled model with cooling channel

Seyed Ali Atyabi et al.

Summary: A suitable cooling flow field design for proton exchange membrane fuel cell (PEMFC) can improve the cell's net generated power and achieve steady performance and longer lifespan. Among the different flow field designs, Case D demonstrated the best temperature uniformity and the lowest maximum temperature, albeit with the highest pressure drop. Taking into account the effect of high pressure drop, Case D achieved the highest power density.

ENERGY (2021)

Add to Collection

Article Thermodynamics

Design and numerical analysis of air-cooled proton exchange membrane fuel cell stack for performance optimization

Cong Yin et al.

Summary: This study designed a novel kW-scale air-cooled PEMFC stack and compared the performance and thermal behaviors between counter-cross and co-cross operations. The results indicated that the counter-cross operation has better performance and water content distribution uniformity.

ENERGY CONVERSION AND MANAGEMENT (2021)

Add to Collection

Article Energy & Fuels

Progress on open cathode proton exchange membrane fuel cell: Performance, designs, challenges and future directions

Jundika C. Kurnia et al.

Summary: Fuel cell is considered a promising candidate to replace internal combustion engine in future vehicles, with open cathode fuel cell system offering a simple and reliable configuration. However, its performance heavily relies on ambient conditions. To expedite research and development in open cathode fuel cell, it is essential to extract and discuss important findings from previous studies and address existing gaps in knowledge.

APPLIED ENERGY (2021)

Add to Collection

Review Energy & Fuels

IS Thermal management of polymer electrolyte membrane fuel cells: A review of cooling methods, material properties, and durability

Qin Chen et al.

Summary: This review summarized recent progress in thermal management of Proton Exchange Membrane (PEM) fuel cells, focusing on waste heat generation mechanisms, cooling methods, cold starts, material properties, and durability. The challenge of cooling PEM fuel cell stacks and coupling thermal and water managements is discussed, along with proposed future directions for research.

APPLIED ENERGY (2021)

Add to Collection

Review Green & Sustainable Science & Technology

A review of membranes in proton exchange membrane fuel cells: Transport phenomena, performance and durability

Mingzhang Pan et al.

Summary: This review highlights the importance of membranes in proton exchange membrane fuel cells, discussing their crucial role in transport phenomena, working mechanisms, and factors affecting performance. The need for experimental data for new membranes and the development of novel membrane designs are also emphasized.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Add to Collection

Article Thermodynamics

Novel battery thermal management system for electric vehicles with a loop heat pipe and graphite sheet inserts

Marco Bernagozzi et al.

Summary: An innovative thermal management system for a 3-cell battery module, utilizing a flat plate Loop Heat Pipe and graphite sheet inserts, has been proposed to address key Electric Vehicles issues including maximum temperature during fast charging and parasitic power consumption. This design allows for efficient heat transfer without the need for electrical power, reducing maintenance requirements compared to standard systems, and has been validated to meet battery thermal requirements with improved temperature control.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Chemistry, Physical

Thermal analysis and management of proton exchange membrane fuel cell stacks for automotive vehicle

Lu Xing et al.

Summary: Thermal management is crucial for proton exchange membrane fuel cells in automotive vehicles. By theoretical analysis and case studies, controlling the cooling water flow rate and temperature is key to effectively meeting thermal management constraints.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Review Energy & Fuels

Recent development of hydrogen and fuel cell technologies: A review

Lixin Fan et al.

Summary: Summary: Hydrogen has emerged as a new energy vector, beyond its industrial role, to address energy security issues in developed countries. China is actively developing hydrogen infrastructure to meet sustainability goals and growing energy demand.

ENERGY REPORTS (2021)

Add to Collection

Article Thermodynamics

Three-dimensional multi-phase simulation of cooling patterns for proton exchange membrane fuel cell based on a modified Bruggeman equation

Hongjian Liu et al.

APPLIED THERMAL ENGINEERING (2020)

Add to Collection

Article Chemistry, Physical

Enabling industrial production of electrodes by use of slot-die coating for HT-PEM fuel cells

Merit Bodner et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Add to Collection

Article Thermodynamics

Performance improvement in a proton exchange membrane fuel cell with separated coolant flow channels in the anode and cathode

Houchang Pei et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Add to Collection

Article Energy & Fuels

Optimization of configurations and cathode operating parameters on liquid-cooled proton exchange membrane fuel cell stacks by orthogonal method

Chen Lin et al.

APPLIED ENERGY (2019)

Add to Collection

Article Thermodynamics

Heat transfer in PEM cooling flow field with high porosity metal foam insert

Y. Vazifeshenas et al.

APPLIED THERMAL ENGINEERING (2019)

Add to Collection

Article Energy & Fuels

Three-dimensional simulation of a new cooling strategy for proton exchange membrane fuel cell stack using a non-isothermal multiphase model

Guobin Zhang et al.

APPLIED ENERGY (2019)

Add to Collection

Article Chemistry, Physical

An improved thermal control of open cathode proton exchange membrane fuel cell

Chaima Mahjoubi et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Add to Collection

Article Thermodynamics

Numerical analysis on thermal performance of cooling plates with wavy channels in PEM fuel cells

Shian Li et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2018)

Add to Collection

Article Thermodynamics

Numerical study on thermal performance of non-uniform flow channel designs for cooling plates of PEM fuel cells

Shian Li et al.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2018)

Add to Collection

Article Thermodynamics

Thermal investigation of a PEM fuel cell with cooling flow field

S. M. Rahgoshay et al.

ENERGY (2017)

Add to Collection

Article Chemistry, Physical

A numerical study on thermal analysis and cooling flow fields effect on PEMFC performance

M. Ghasemi et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Add to Collection

Article Energy & Fuels

Numerical investigation on a novel zigzag-shaped flow channel design for cooling plates of PEM fuel cells

Ebrahim Afshari et al.

JOURNAL OF THE ENERGY INSTITUTE (2017)

Add to Collection

Article Chemistry, Physical

A comparison of evaporative and liquid cooling methods for fuel cell vehicles

A. Fly et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

Add to Collection

Article Chemistry, Physical

Optimization of a PEM fuel cell operating conditions: Obtaining the maximum performance polarization curve

J. Antonio Salva et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

Add to Collection

Article Chemistry, Physical

A novel cooling flow field design for polymer electrolyte membrane fuel cell stack

E. Alizadeh et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

Add to Collection

Article Thermodynamics

Experimental study of the thermal performance of chaotic geometries for their use in PEM fuel cells

Cathy Castelain et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2016)

Add to Collection

Article Chemistry, Physical

Lifetime and degradation of high temperature PEM membrane electrode assemblies

R. Kerr et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)

Add to Collection

Review Green & Sustainable Science & Technology

The potential of using nanofluids in PEM fuel cell cooling systems: A review

M. R. Islam et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

Add to Collection

Review Materials Science, Multidisciplinary

Thermal Management Material: Graphite

Michio Inagaki et al.

ADVANCED ENGINEERING MATERIALS (2014)

Add to Collection

Article Thermodynamics

Designing heat exchanger with spatially variable surface area for passive cooling of PEM fuel cell

Ender Ozden et al.

APPLIED THERMAL ENGINEERING (2013)

Add to Collection

Article Energy & Fuels

Numerical study of serpentine flow-field cooling plates on PEM fuel cells performance

Dong Hyup Jeon

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2013)

Add to Collection

Article Thermodynamics

Tools for designing the cooling system of a proton exchange membrane fuel cell

Ulrich Soupremanien et al.

APPLIED THERMAL ENGINEERING (2012)

Add to Collection

Article Thermodynamics

Numerical evaluation of various gas and coolant channel designs for high performance liquid-cooled proton exchange membrane fuel cell stacks

Agus P. Sasmito et al.

ENERGY (2012)

Add to Collection

Review Energy & Fuels

A review of polymer electrolyte membrane fuel cells: Technology, applications, and needs on fundamental research

Yun Wang et al.

APPLIED ENERGY (2011)

Add to Collection

Article Thermodynamics

A numerical study on uniform cooling of large-scale PEMFCs with different coolant flow field designs

Seung Man Baek et al.

APPLIED THERMAL ENGINEERING (2011)

Add to Collection

Article Chemistry, Physical

Model based design and test of cooling plates for an air-cooled polymer electrolyte fuel cell stack

Mardit Matian et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)

Add to Collection

Article Chemistry, Physical

Maintaining desired level of relative humidity throughout a fuel cell with spatially variable heat removal rates

Ivan Tolj et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)

Add to Collection

Article Chemistry, Physical

An air-cooled proton exchange membrane fuel cell with combined oxidant and coolant flow

Jinfeng Wu et al.

JOURNAL OF POWER SOURCES (2009)

Add to Collection

Article Chemistry, Physical

Numerical study to examine the performance of multi-pass serpentine flow-fields for cooling plates in polymer electrolyte membrane fuel cells

Seung Ho Yu et al.

JOURNAL OF POWER SOURCES (2009)

Add to Collection

Review Chemistry, Physical

A review of water flooding issues in the proton exchange membrane fuel cell

Hui Li et al.

JOURNAL OF POWER SOURCES (2008)

Add to Collection

Article Chemistry, Physical

Operational aspects of a large PEFC stack under practical conditions

P Rodatz et al.

JOURNAL OF POWER SOURCES (2004)

Add to Collection

Article Electrochemistry

Conductivity of PBI membranes for high-temperature polymer electrolyte fuel cells

YL Ma et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)

Add to Collection

Article Chemistry, Physical

Fuel economy and life-cycle cost analysis of a fuel cell hybrid vehicle

KS Jeong et al.

JOURNAL OF POWER SOURCES (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.