Related references
Note: Only part of the references are listed.Review of mechanical properties of and optimisation methods for continuous fibre-reinforced thermoplastic parts manufactured by fused deposition modelling
Michael Handwerker et al.
PROGRESS IN ADDITIVE MANUFACTURING (2021)
3D compaction printing of a continuous carbon fiber reinforced thermoplastic
Masahito Ueda et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
3D printed continuous CF/PA6 composites: Effect of microscopic voids on mechanical performance
Qinghao He et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
A Novel Route to Fabricate High-Performance 3D Printed Continuous Fiber-Reinforced Thermosetting Polymer Composites
Yueke Ming et al.
MATERIALS (2019)
Microstructural analysis of short glass fiber reinforced thermoplastics based on x-ray micro-computed tomography
Patrick Arthur Hessman et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Analysis of yarn fiber volume fraction in textile composites using scanning electron microscopy and X-ray micro-computed tomography
Xiu-Wei Yu et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2019)
Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
Guo Dong Goh et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
Characterization of 3D printed long fibre reinforced composites
J. Justo et al.
COMPOSITE STRUCTURES (2018)
Interfacial bonding strength of short carbon fiber/acrylonitrile-butadiene-styrene composites fabricated by fused deposition modeling
Wei Zhang et al.
COMPOSITES PART B-ENGINEERING (2018)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
Properties of oriented carbon fiber/polyamide 12 composite parts fabricated by fused deposition modeling
Guangxin Liao et al.
MATERIALS & DESIGN (2018)
Surface modification of carbon fibers and the selective laser sintering of modified carbon fiber/nylon 12 composite powder
Wu Jing et al.
MATERIALS & DESIGN (2017)
A review on composite materials and process parameters optimisation for the fused deposition modelling process
N. Mohan et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
Experimental characterization and micrography of 3D printed PLA and PLA reinforced with short carbon fibers
Rafael Thiago Luiz Ferreira et al.
COMPOSITES PART B-ENGINEERING (2017)
Individual fibre segmentation from 3D X-ray computed tomography for characterising the fibre orientation in unidirectional composite materials
Monica J. Emerson et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Evaluation and prediction of the tensile properties of continuous fiber-reinforced 3D printed structures
Garrett W. Melenka et al.
COMPOSITE STRUCTURES (2016)
Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
Ryosuke Matsuzaki et al.
SCIENTIFIC REPORTS (2016)
The voids formation mechanisms and their effects on the mechanical properties of flax fiber reinforced epoxy composites
Yan Li et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
Fuda Ning et al.
COMPOSITES PART B-ENGINEERING (2015)
A novel manufacturing method for aligned discontinuous fibre composites (High Performance-Discontinuous Fibre method)
H. Yu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Fatigue crack growth of SLS polyamide 12: Effect of reinforcement and temperature
A. Salazar et al.
COMPOSITES PART B-ENGINEERING (2014)
Highly oriented carbon fiber-polymer composites via additive manufacturing
Halil L. Tekinalp et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Curing Pressure Influence of Out-of-Autoclave Processing on Structural Composites for Commercial Aviation
Vasileios M. Drakonakis et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2013)
Prediction of tensile strength of discontinuous carbon fiber/polypropylene composite with fiber orientation distribution
M. Hashimoto et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
The engineering aspects of automated prepreg layup: History, present and future
Dirk H. -J. A. Lukaszewicz et al.
COMPOSITES PART B-ENGINEERING (2012)
Effects of variation in autoclave pressure, temperature, and vacuum-application time on porosity and mechanical properties of a carbon fiber/epoxy composite
Hoda Koushyar et al.
JOURNAL OF COMPOSITE MATERIALS (2012)
Mechanical and microstructural properties of Nylon-12/carbon black composites: Selective laser sintering versus melt compounding and injection molding
Siddharth Ram Athreya et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Influence of Voids on the Tensile Performance of Carbon/epoxy Fabric Laminates
Hongyan Zhu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2011)
Porosity analysis of long-fiber-reinforced ceramic matrix composites using X-ray tomography
A. Morales-Rodriguez et al.
SCRIPTA MATERIALIA (2009)
Strengths and limitations of Taguchi's contributions to quality, manufacturing, and process engineering
S Maghsoodloo et al.
JOURNAL OF MANUFACTURING SYSTEMS (2004)
Study of the mechanical properties of nonwoven fibre mat reinforced photopolymers used in rapid prototyping
DE Karalekas
MATERIALS & DESIGN (2003)
Nanofiber-reinforced polymers prepared by fused deposition modeling
ML Shofner et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2003)
Share Paper
