Related references
Note: Only part of the references are listed.The underestimated contribution of the solvent to the phase behavior of highly drug loaded amorphous solid dispersions
Sien Dedroog et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
2D and 3D inkjet printing of biopharmaceuticals - A review of trends and future perspectives in research and manufacturing
Susannah Elizabeth Evans et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
Infliximab formulation strategy for a stable ileo-colonic targeted oral dosage form intended for the topical treatment of inflammatory bowel disease
Bahez Gareb et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2021)
Evaluation of lactose based 3D powder bed printed pharmaceutical drug product tablets
Korinde A. van den Heuvel et al.
POWDER TECHNOLOGY (2021)
Ileo-Colon Targeting of the Poorly Water-Soluble Drug Celecoxib Using a pH-Dependent Coating in Combination with Self-Emulsifying Drug Delivery or Solid Dispersion Systems
Annemarie Broesder et al.
PHARMACEUTICS (2021)
Translating 3D printed pharmaceuticals: From hype to real-world clinical applications
Iria Seoane-Viano et al.
ADVANCED DRUG DELIVERY REVIEWS (2021)
pH-dependent ileocolonic drug delivery, part I: in vitro and clinical evaluation of novel systems
Annemarie Broesder et al.
DRUG DISCOVERY TODAY (2020)
Formulation design for inkjet-based 3D printed tablets
Koyel Sen et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Formulating monoclonal antibodies as powders for reconstitution at high concentration using spray-drying: Trehalose/amino acid combinations as reconstitution time reducing and stability improving formulations
Jan Massant et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2020)
Comparison of Linear and 4-Arm Star Poly(vinyl pyrrolidone) for Aqueous Binder Jetting Additive Manufacturing of Personalized Dosage Tablets
Emily M. Wilts et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Towards the Oral Treatment of Ileo-Colonic Inflammatory Bowel Disease with Infliximab Tablets: Development and Validation of the Production Process
Bahez Gareb et al.
PHARMACEUTICS (2019)
Binder jetting: A review of process, materials, and methods
Mohsen Ziaee et al.
ADDITIVE MANUFACTURING (2019)
Understanding the effects of formulation and process variables on the printlets quality manufactured by selective laser sintering 3D printing
Sogra F. Barakh Ali et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Powder bed 3D-printing of highly loaded drug delivery devices with hydroxypropyl cellulose as solid binder
Sophia Infanger et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Development of novel zero-order release budesonide tablets for the treatment of ileo-colonic inflammatory bowel disease and comparison with formulations currently used in clinical practice
Bahez Gareb et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
The mechanism behind the biphasic pulsatile drug release from physically mixed poly(DL-lactic(-co-glycolic) acid)-based compacts
Max Beugeling et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Resolving the physiological conditions in bioavailability and bioequivalence studies: Comparison of fasted and fed state
Felix Schneider et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2016)
3D printing in pharmaceutics: A new tool for designing customized drug delivery systems
Goole Jonathan et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
Inulin, a flexible oligosaccharide I: Review of its physicochemical characteristics
Maarten A. Mensink et al.
CARBOHYDRATE POLYMERS (2015)
Inulin, a flexible oligosaccharide. II: Review of its pharmaceutical applications
Maarten A. Mensink et al.
CARBOHYDRATE POLYMERS (2015)
In-line near infrared spectroscopy during freeze-drying as a tool to measure efficiency of hydrogen bond formation between protein and sugar, predictive of protein storage stability
Maarten A. Mensink et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Fabrication of controlled-release budesonide tablets via desktop (FDM) 3D printing
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Investigation of pH and Temperature Profiles in the GI Tract of Fasted Human Subjects Using the Intellicap® System
Mirko Koziolek et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
Assessment of Tandem Measurements of pH and Total Gut Transit Time in Healthy Volunteers
Adam E. Mikolajczyk et al.
CLINICAL AND TRANSLATIONAL GASTROENTEROLOGY (2015)
Printability of calcium phosphate: Calcium sulfate powders for the application of tissue engineered bone scaffolds using the 3D printing technique
Zuoxin Zhou et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)
Unraveling protein stabilization mechanisms: Vitrification and water replacement in a glass transition temperature controlled system
N. Grasmeijer et al.
BIOCHIMICA ET BIOPHYSICA ACTA-PROTEINS AND PROTEOMICS (2013)
Printing technologies in fabrication of drug delivery systems
Ruzica Kolakovic et al.
EXPERT OPINION ON DRUG DELIVERY (2013)
Film coated tablets (ColoPulse technology) for targeted delivery in the lower intestinal tract: Influence of the core composition on release characteristics
Reinout C. A. Schellekens et al.
PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY (2012)
A Non-Invasive, Low-Cost Study Design to Determine the Release Profile of Colon Drug Delivery Systems: A Feasibility Study
Marina J. M. Maurer et al.
PHARMACEUTICAL RESEARCH (2012)
Preparation of Personalized-dose Salbutamol Sulphate Oral Films with Thermal Ink-Jet Printing
Asma B. M. Buanz et al.
PHARMACEUTICAL RESEARCH (2011)
Exogenous Alkaline Phosphatase for the Treatment of Patients with Moderate to Severe Ulcerative Colitis
Milan Lukas et al.
INFLAMMATORY BOWEL DISEASES (2010)
Oral ileocolonic drug delivery by the colopulse-system: A bioavailability study in healthy volunteers
R. C. A. Schellekens et al.
JOURNAL OF CONTROLLED RELEASE (2010)
Proof-of-concept study on the suitability of C-13-urea as a marker substance for assessment of in vivo behaviour of oral colon-targeted dosage forms
R. C. A. Schellekens et al.
BRITISH JOURNAL OF PHARMACOLOGY (2009)
Role of alkaline phosphatase in colitis in man and rats
A. Tuin et al.
GUT (2009)
Novel drug delivery devices for providing linear release profiles fabricated by 3DP
Deng-Guang Yu et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2009)
Effect of particle size on three dimensional printed mesh structures
Kathy Lu et al.
POWDER TECHNOLOGY (2009)
Pulsatile drug delivery to ileo-colonic segments by structured incorporation of disintegrants in pH-responsive polymer coatings
R. C. A. Schellekens et al.
JOURNAL OF CONTROLLED RELEASE (2008)
Effect of production parameters on the properties of IN 718 superalloy by three-dimensional printing
M. Turker et al.
MATERIALS CHARACTERIZATION (2008)
Pulmonary delivery of an inulin-stabilized influenza subunit vaccine prepared by spray-freeze drying induces systemic, mucosal humoral as well as cell-mediated immune responses in BALB/c mice
J-P. Amorij et al.
VACCINE (2007)
Unravelling the pathogenesis of inflammatory bowel disease
R. J. Xavier et al.
NATURE (2007)
A novel dissolution method relevant to intestinal release behaviour and its application in the evaluation of modified release mesalazine products
R. C. A. Schellekens et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2007)
Development of near zero-order release dosage forms using three-dimensional printing (3-DP (TM)) technology
CC Wang et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2006)
Mechanism of protein stabilization by sugars during freeze-drying and storage: Native structure preservation, specific interaction, and/or immobilization in a glassy matrix?
LQ Chang et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2005)
The immunological and genetic basis of inflammatory bowel disease
G Bouma et al.
NATURE REVIEWS IMMUNOLOGY (2003)
Protective mechanism of stabilizing excipients against dehydration in the freeze-drying of proteins
YH Liao et al.
PHARMACEUTICAL RESEARCH (2002)
Inulin glasses for the stabilization of therapeutic proteins
WLJ Hinrichs et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2001)
Oral dosage forms fabricated by Three Dimensional Printing™
WE Katstra et al.
JOURNAL OF CONTROLLED RELEASE (2000)