☆ 4.7 Article

4D Printing Via Multispeed Fused Deposition Modeling

ADVANCED MATERIALS TECHNOLOGIES (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Manufacturing

Untethered selectively actuated microwave 4D printing through ferromagnetic PLA

Teck Yang Koh et al.

Summary: We propose a novel 4D printing technique that utilizes microwave radiation for non-contact actuation on thermal activated shape-shifting structures. By integrating dielectric materials into specific locations of a shape memory polymer (SMP) structure, we can achieve actuation of the 4D printed object using microwave radiation. This technique offers additional capabilities such as selective region heating, precise multi-step actuation, remote actuation, and reduced heating time.

ADDITIVE MANUFACTURING (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanics-based design strategies for 4D printing: A review

Chao Yuan et al.

Summary: Four-dimensional (4D) printing is an emerging technology that enables time-dependent transformation of additive manufactured objects. This review classifies reported 4D printing works based on the mechanics principle that yields 2D-3D transformation. It comprehensively explores the interconnections among different 4D printing strategies and identifies challenges in mechanical design, printing techniques, and material synthesis.

FORCES IN MECHANICS (2022)

Add to Collection

Article Engineering, Mechanical

Multimaterial direct 4D printing of high stiffness structures with large bending curvature

Chao Yuan et al.

Summary: The emerging direct four dimensional (4D) printing approach allows for the fabrication of complex 3D geometries from printed flat patterns, but faces challenges in achieving both large bending curvature and high loading capacity simultaneously. A multimaterial direct 4D printing method has been developed to address this issue, utilizing dehydration induced shrinkage and stiffening to create 3D structures with large bending curvature and high bending stiffness. This approach demonstrates advantages in terms of less building time and high load capacity compared to other 3D printing technologies.

EXTREME MECHANICS LETTERS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Hybrid hinge structure with elastic hinge on self-folding of 4D printing using a fused deposition modeling 3D printer

Shunsuke Yamamura et al.

Summary: A new hybrid hinge structure was proposed in this study to enable elastic folding deformation after 4D printing, with high durability and elasticity maintained even after 500 cycles of folding. The usefulness of the hybrid hinge was demonstrated through the fabrication of a miura-ori and an origami compliant mechanism gripper.

MATERIALS & DESIGN (2021)

Add to Collection

Article Materials Science, Multidisciplinary

4D Printing of Continuous Shape Representation

Sang-Joon Ahn et al.

Summary: A novel 4D printing strategy utilizing shape memory polymers to achieve continuous levels of shape-recovery strain is proposed. The irrecoverable state of the polymers and the corresponding recovery strain can be precisely controlled, allowing for translation into mathematical function representation to implement 4D-printed bilayer strain functions that match target geometry curvatures. This approach demonstrates the capability to produce 4D-printed architectures with continuously varying strain profiles of almost any function type, as shown by the example of 3D face masks with facial feature transformation.

ADVANCED MATERIALS TECHNOLOGIES (2021)

Add to Collection

Article Engineering, Multidisciplinary

4D-printed bi-material composite laminate for manufacturing reversible shape-change structures

Yanan Wang et al.

Summary: A low-cost method for reversible structural deformation using 4D printing is proposed, combining TPU and PLA materials with mathematical modeling to analyze the feasibility and requirements of the composite laminate structures. The experimental and simulation results show consistency in deformation trends, demonstrating the broad application prospects of this strategy in reversible 4D printing.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Review Polymer Science

A review of fused deposition modelling for 3D printing of smart polymeric materials and composites

K. B. Mustapha et al.

Summary: Over the past 10 years, additive manufacturing (AM) has been applied to various fields, with a recent surge of interest in smart material fabrication using FDM. Research focus lies in processing conditions and properties of components, with applications ranging from planar structures to sensitive components. More efforts are needed in smart polymer feedstock synthesis, process simulation, tuning of FDM process, and standardization of tests for characterization.

EUROPEAN POLYMER JOURNAL (2021)

Add to Collection

Article Polymer Science

4D printing of shape memory polylactic acid (PLA)

Mehrshad Mehrpouya et al.

Summary: Additive manufacturing, particularly in the form of 4D printing, has gained significant attention in recent years for enabling the production of parts with time-dependent shapes and responses to environmental stimuli. The use of materials like polylactic acid (PLA) polymer, known for its great shape memory behavior, allows for the design and manufacturing of a wide range of smart products through 4D printing techniques. Research has focused on exploring the material properties, self-folding structures, and impact of design and printing conditions on the functionality of final printed products using PLA for 4D printing.

POLYMER (2021)

Add to Collection

Article Materials Science, Multidisciplinary

4D printing of reconfigurable metamaterials and devices

Teunis van Manen et al.

Summary: The article presents a single-step production method for fabricating reconfigurable materials with 3D-to-3D shape-changing behavior by modifying a 3D printer to print on curved surfaces. This method allows for high levels of complexity and versatility, showcasing potential applications for producing challenging products like medical devices.

COMMUNICATIONS MATERIALS (2021)

Add to Collection

Review Engineering, Mechanical

Four-dimensional printing using fused-deposition modeling: a review

John Carrell et al.

RAPID PROTOTYPING JOURNAL (2020)

Add to Collection

Article Computer Science, Software Engineering

Material characterization and precise finite element analysis of fiber reinforced thermoplastic composites for 4D printing

Yuxuan Yu et al.

COMPUTER-AIDED DESIGN (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Encoding multiple permanent shapes in 3D printed structures

Katherine S. Riley et al.

MATERIALS & DESIGN (2020)

Add to Collection

Article Materials Science, Multidisciplinary

An accurate finite element approach for programming 4D-printed self-morphing structures produced by fused deposition modeling

Yanan Wang et al.

MECHANICS OF MATERIALS (2020)

Add to Collection

Article Engineering, Multidisciplinary

Soft grasping mechanisms composed of shape memory polymer based self-bending units

Wei Wang et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Instruments & Instrumentation

Influence of fused deposition modeling process parameters on the transformation of 4D printed morphing structures

Lukas Kacergis et al.

SMART MATERIALS AND STRUCTURES (2019)

Add to Collection

Article Instruments & Instrumentation

Programming the deformation of a temperature-driven bilayer structure in 4D printing

Siyuan Zeng et al.

SMART MATERIALS AND STRUCTURES (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Advances in 4D Printing: Materials and Applications

Xiao Kuang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Soft Tendril-Inspired Grippers: Shape Morphing of Programmable Polymer-Paper Bilayer Composites

Wei Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Programmable morphing composites with embedded continuous fibers by 4D printing

Qingrui Wang et al.

MATERIALS & DESIGN (2018)

Add to Collection

Article Multidisciplinary Sciences

Printing ferromagnetic domains for untethered fast-transforming soft materials

Yoonho Kim et al.

NATURE (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Ultrafast Digital Printing toward 4D Shape Changing Materials

Limei Huang et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Instruments & Instrumentation

Increasing dimension of structures by 4D printing shape memory polymers via fused deposition modeling

G. F. Hu et al.

SMART MATERIALS AND STRUCTURES (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Adaptive metamaterials by functionally graded 4D printing

M. Bodaghi et al.

MATERIALS & DESIGN (2017)

Add to Collection

Article Multidisciplinary Sciences

Origami by frontal photopolymerization

Zeang Zhao et al.

SCIENCE ADVANCES (2017)

Add to Collection

Article Multidisciplinary Sciences

Direct 4D printing via active composite materials

Zhen Ding et al.

SCIENCE ADVANCES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Harnessing Photochemical Shrinkage in Direct Laser Writing for Shape Morphing of Polymer Sheets

Anton A. Bauhofer et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Four-dimensional Printing of Liquid Crystal Elastomers

Cedric P. Ambulo et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Chemistry, Physical

Biomimetic 4D printing

A. Sydney Gladman et al.

NATURE MATERIALS (2016)

Add to Collection

Article Multidisciplinary Sciences

Smart three-dimensional lightweight structure triggered from a thin composite sheet via 3D printing technique

Quan Zhang et al.

SCIENTIFIC REPORTS (2016)

Add to Collection

Article Multidisciplinary Sciences

Pattern Transformation of Heat-Shrinkable Polymer by Three-Dimensional (3D) Printing Technique

Quan Zhang et al.

SCIENTIFIC REPORTS (2015)

Add to Collection

Article Multidisciplinary Sciences

Active Printed Materials for Complex Self- Evolving Deformations

Dan Raviv et al.

SCIENTIFIC REPORTS (2014)

Add to Collection

Article Physics, Applied

Active materials by four-dimension printing

Qi Ge et al.

APPLIED PHYSICS LETTERS (2013)

Add to Collection

© Peeref 2019-2024. All rights reserved.