4.7 Article

Effects of elevated temperatures on properties of hybrid alkaline-belite cement with high level of fly ash

Related references

Note: Only part of the references are listed.
Article Construction & Building Technology

Sustainable clinker-free solid waste binder produced from wet-ground granulated blast-furnace slag, phosphogypsum and carbide slag

Jin Yang et al.

Summary: Reducing or replacing cement clinker is crucial for the sustainable development of the cement industry. In this study, three types of industrial solid wastes were used to design clinker-free, high-performance ternary binders for construction applications. The experimental results showed that the treated binders had higher compressive strength than cement, with lower cost and carbon emissions.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Article Green & Sustainable Science & Technology

An efficient approach for sustainable fly ash geopolymer by coupled activation of wet-milling mechanical force and calcium hydroxide

Jin Yang et al.

Summary: Geopolymer made from fly ash is a potential environmentally friendly and inexpensive alternative to high-emission cement production. In this study, wet-milling mechanical force and calcium hydroxide were used to prepare high-performance alkaline calcium activated geopolymers. Increasing the content of calcium hydroxide improved the strength and chloride resistance of the geopolymers, but also increased the autogenous shrinkage. Wet-milled fly ash geopolymers showed even greater improvements due to the pre-depolymerization effect of wet-milling and the activation effect of calcium hydroxide. The resulting geopolymers had significantly improved compressive strength and microstructure, and performed better than Portland cement in terms of environmental impact.

JOURNAL OF CLEANER PRODUCTION (2022)

Review Construction & Building Technology

Hydration mechanisms and durability of hybrid alkaline cements (HACs): A review

Lili Xue et al.

Summary: Hybrid alkaline cement (HAC) possesses a denser microstructure, higher early strength, and excellent resistance to sulfate attack and chloride penetration. While HAC is more durable than Portland cement in many environments, the lack of long-term field track records is a barrier for its application.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Hybrid cements: Towards their use as alternative and durable materials against wear

S. Shagnay et al.

Summary: The study suggests that hybrid cements manufactured from waste materials exhibit lower wear losses in wear behavior, and perform similarly to conventional cements in terms of wear resistance.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Eco-friendly UHPC prepared from high volume wet-grinded ultrafine GGBS slurry

Jin Yang et al.

Summary: By utilizing a high content of wet-grinded ultrafine ground granulated blast furnace slag (UGGBS), eco-friendly UHPC with improved mechanical performance and microstructure can be prepared; the high volume incorporation of UGGBS in the cementitious system enhances compressive strength, refines pore structure, and reduces CO2 emissions and production costs.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Green & Sustainable Science & Technology

Feasibility of incorporating autoclaved aerated concrete waste for cement replacement in sustainable building materials

Xingyang He et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Construction & Building Technology

Effect of high temperatures on the mechanical behaviour of hybrid cement

B. Qu et al.

MATERIALES DE CONSTRUCCION (2020)

Article Materials Science, Multidisciplinary

Water in Alkali Aluminosilicate Glasses

Robert Balzer et al.

FRONTIERS IN MATERIALS (2020)

Article Materials Science, Multidisciplinary

Synthesis of kaolin-based alkali-activated cement: carbon footprint, cost and energy assessment

Ayman Ababneh et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Article Construction & Building Technology

Microstructural characterisation of hybrid cement after exposure to high temperatures

Bo Qu et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Materials Science, Ceramics

Hydration mechanisms of hybrid cements as a function of the way of addition of chemicals

Ana Fernandez-Jimenez et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)

Article Materials Science, Multidisciplinary

Studies About the Hydration of Hybrid Alkaline-Belite Cement

M. J. Sanchez-Herrero et al.

FRONTIERS IN MATERIALS (2019)

Article Materials Science, Multidisciplinary

Investigation of compressive strength and microstructures of activated cement free binder from fly ash - calcium carbide residue mixture

Saofee Dueramae et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

Article Construction & Building Technology

Hybrid binders: A journey from the past to a sustainable future (opus caementicium futurum)

A. Palomo et al.

CEMENT AND CONCRETE RESEARCH (2019)

Review Materials Science, Multidisciplinary

Reaction products, structure and properties of alkali-activated metakaolin cements incorporated with supplementary materials - a review

Nailia R. Rakhimova et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

Article Construction & Building Technology

Compressive strength and microstructure of alkali-activated fly ash/slag binders at high temperature

Z. Pan et al.

CEMENT & CONCRETE COMPOSITES (2018)

Article Materials Science, Ceramics

Understanding the structural origin of crystalline phase transformations in nepheline (NaAlSiO4)-based glass-ceramics

Ambar Deshkar et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)

Article Construction & Building Technology

Chemical activation of hybrid binders based on siliceous fly ash and Portland cement

Salaheddine Alahrache et al.

CEMENT & CONCRETE COMPOSITES (2016)

Article Construction & Building Technology

Characterisation of pre-industrial hybrid cement and effect of pre-curing temperature

Bo Qu et al.

CEMENT & CONCRETE COMPOSITES (2016)

Article Construction & Building Technology

Physicochemical properties of binder gel in alkali-activated fly ash/slag exposed to high temperatures

S. M. Park et al.

CEMENT AND CONCRETE RESEARCH (2016)

Article Construction & Building Technology

Microstructure of cement paste with natural pozzolanic volcanic ash and Portland cement at different stages of curing

Kunal Kupwade-Patil et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Materials Science, Multidisciplinary

Structural evolution of an alkali sulfate activated slag cement

Neda Mobasher et al.

JOURNAL OF NUCLEAR MATERIALS (2016)

Article Materials Science, Ceramics

Stoichiometrically controlled C-(A)-S-H/N-A-S-H gel blends via alkali activation of synthetic precursors

B. Walkley et al.

ADVANCES IN APPLIED CERAMICS (2015)

Article Construction & Building Technology

Mechanical behaviour at high temperature of alkali-activated aluminosilicates (geopolymers)

Antonia Martin et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Materials Science, Ceramics

Thermally Induced Microstructural Changes in Fly Ash Geopolymers: Experimental Results and Proposed Model

William D. A. Rickard et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2015)

Article Construction & Building Technology

Microstructure and durability of alkali-activated materials as key parameters for standardization

Jannie S. J. van Deventer et al.

JOURNAL OF SUSTAINABLE CEMENT-BASED MATERIALS (2015)

Article Construction & Building Technology

High temperature resistance of a very high volume fly ash cement paste

Shane Donatello et al.

CEMENT & CONCRETE COMPOSITES (2014)

Article Nuclear Science & Technology

Characterization and storage of radioactive zeolite waste

Isao Yamagishi et al.

JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY (2014)

Article Construction & Building Technology

Characterization of alkali activated slag paste after exposure to high temperatures

Pavel Rovnanik et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Article Construction & Building Technology

Factors influencing softening temperature and hot-strength of geopolymers

Zhu Pan et al.

CEMENT & CONCRETE COMPOSITES (2012)

Article Construction & Building Technology

Chemical and mechanical stability of sodium sulfate activated slag after exposure to elevated temperature

A. M. Rashad et al.

CEMENT AND CONCRETE RESEARCH (2012)

Review Construction & Building Technology

Compatibility studies between N-A-S-H and C-A-S-H gels. Study in the ternary diagram Na2O-CaO-Al2O3-SiO2-H2O

I. Garcia-Lodeiro et al.

CEMENT AND CONCRETE RESEARCH (2011)

Article Construction & Building Technology

Stress-strain behaviour and abrupt loss of stiffness of geopolymer at elevated temperatures

Zhu Pan et al.

CEMENT & CONCRETE COMPOSITES (2010)

Article Materials Science, Ceramics

High-Temperature Resistance in Alkali-Activated Cement

Ana Fernandez-Jimenez et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2010)

Article Chemistry, Applied

Thermostability of hydroxy sodalite in view of membrane applications

Sheida Khajavi et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2010)

Article Materials Science, Ceramics

New Cementitious Materials Based on Alkali-Activated Fly Ash: Performance at High Temperatures

Ana Fernandez-Jimenez et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2008)

Article Construction & Building Technology

Phase transformations and mechanical strength of OPC/Slag pastes submitted to high temperatures

Alessandra Mendes et al.

MATERIALS AND STRUCTURES (2008)

Article Construction & Building Technology

Thermal properties of alkali-activated slag subjected to high temperatures

Lucie Zuda et al.

JOURNAL OF BUILDING PHYSICS (2007)

Review Materials Science, Ceramics

Synthesis and thermal behavior of different aluminosilicate gels

A. Fernández-Jiménez et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2006)

Article Construction & Building Technology

Thermal behaviour of geopolymers prepared using class F fly ash and elevated temperature curing

T Bakharev

CEMENT AND CONCRETE RESEARCH (2006)

Article Construction & Building Technology

Composition and microstructure of alkali activated fly ash binder:: Effect of the activator

A Fernández-Jiménez et al.

CEMENT AND CONCRETE RESEARCH (2005)

Article Construction & Building Technology

Microstructure development of alkali-activated fly ash cement:: a descriptive model

A Fernández-Jiménez et al.

CEMENT AND CONCRETE RESEARCH (2005)

Article Materials Science, Multidisciplinary

Dehydration and rehydration processes of cement paste exposed to high temperature environments

C Alonso et al.

JOURNAL OF MATERIALS SCIENCE (2004)

Article Materials Science, Ceramics

Alkaline activation of fly ashes:: NMR study of the reaction products

A Palomo et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2004)

Article Thermodynamics

Phase transformation on heating of an aged cement paste

ET Stepkowska et al.

THERMOCHIMICA ACTA (2004)

Article Energy & Fuels

Characterisation of fly ashes.: Potential reactivity as alkaline cements

A Fernández-Jiménez et al.

Article Chemistry, Inorganic & Nuclear

29Si chemical shift anisotropies in calcium silicates from high-field 29Si MAS NMR spectroscopy

MR Hansen et al.

INORGANIC CHEMISTRY (2003)

Article Construction & Building Technology

Pore size distribution of hydrated cement pastes modified with polymers

DA Silva et al.

CEMENT AND CONCRETE RESEARCH (2001)

Article Construction & Building Technology

29Si and 27Al high-resolution NMR characterization of calcium silicate hydrate phases in activated blast-furnace slag pastes

J Schneider et al.

CEMENT AND CONCRETE RESEARCH (2001)