Related references
Note: Only part of the references are listed.Characteristics of bainitic transformation and its effects on the mechanical properties in quenching and partitioning steels
Shan Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
The effect of Nb on the strain rate and temperature dependent behaviour of quenching & partitioning steels
Florian Vercruysse et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Competitive mechanisms occurring during quenching and partitioning of three silicon variants of 0.4 wt.% carbon steels
Ilkka Miettunen et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Joint investigation of strain partitioning and chemical partitioning in ferrite-containing TRIP-assisted steels
Xiaodong Tan et al.
ACTA MATERIALIA (2020)
Effect of the austenitizing temperature on the microstructure evolution and mechanical properties of Q&P steel
Tao Kong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Austenite Stability and Strain Hardening in C-Mn-Si Quenching and Partitioning Steels
Christopher B. Finfrock et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
Austenite formation kinetics from multicomponent cementite-ferrite aggregates
Y. X. Wu et al.
ACTA MATERIALIA (2020)
Alloying-element interactions with austenite/martensite interface during quenching and partitioning of a model Fe-C-Mn-Si alloy
M. Goune et al.
SCRIPTA MATERIALIA (2019)
Combined effect of cathodic potential and sulfur species on calcareous deposition, hydrogen permeation, and hydrogen embrittlement of a low carbon bainite steel in artificial seawater
Huiyun Tian et al.
CORROSION SCIENCE (2019)
Effect of Prior Cold Deformation on the Stability of Retained Austenite in GCr15 Bearing Steel
Feng Wang et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2019)
A novel two-step intercritical annealing process to improve mechanical properties of medium Mn steel
Bin Hu et al.
ACTA MATERIALIA (2019)
The influence of the austenite grain size on the microstructural development during quenching and partitioning processing of a low-carbon steel
Carola Celada-Casero et al.
MATERIALS & DESIGN (2019)
High strength and ductility combination in nano-/ultrafine-grained medium-Mn steel by tuning the stability of reverted austenite involving intercritical annealing
Jun Hu et al.
JOURNAL OF MATERIALS SCIENCE (2019)
Carbon and strain partitioning in a quenched and partitioned steel containing ferrite
Xiaodong Tan et al.
ACTA MATERIALIA (2019)
Effect of microstructure morphology on mechanical properties of quenching and partitioning steel
Shaoheng Sun et al.
MATERIALS SCIENCE AND TECHNOLOGY (2018)
Ensuring combination of strength, ductility and toughness in medium-manganese steel through optimization of nano-scale metastable austenite
Jun Hu et al.
MATERIALS CHARACTERIZATION (2018)
Room temperature mechanical properties and microstructure of a low alloyed TRIP-assisted steel subjected to one-step and two-step quenching and partitioning process
A. Zinsaz-Borujerdi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Improvement of tensile mechanical properties in a TRIP-assisted steel by controlling of crystallographic orientation via HSQ&P processes
E. A. Ariza et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Microstructural characteristics and tensile behavior of medium manganese steels with different manganese additions
Binhan Sun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Optimum properties of quenching and partitioning steels achieved by balancing fraction and stability of retained austenite
L. Liu et al.
SCRIPTA MATERIALIA (2018)
Hot Straining and Quenching and Partitioning of a TRIP-Assisted Steel: Microstructural Characterization and Mechanical Properties
Edwan Anderson Ariza et al.
THERMEC 2018: 10TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS (2018)
Comparative study on microstructure and mechanical properties of a C-Mn-Si steel treated by quenching and partitioning (Q & P) processes after a full and intercritical austenitization
Shu Yan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Combining gradient structure and TRIP effect to produce austenite stainless steel with high strength and ductility
X. L. Wu et al.
ACTA MATERIALIA (2016)
Fast-heating for intercritical annealing of cold-rolled quenching and partitioning steel
Geng Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effect of partial and full austenitisation on microstructure and mechanical properties of quenching and partitioning steel
G. Mandal et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Analysis of the mechanical behavior of a 0.3C-1.6Si-3.5Mn (wt%) quenching and partitioning steel
Farideh HajyAkbary et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Characterization and methodology for calculating the mechanical properties of a TRIP-steel submitted to hot stamping and quenching and partitioning (Q&P)
E. A. Ariza et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
The stability of retained austenite at different locations during straining of I&Q&P steel
Chenghao Song et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effect of intercritical deformation on microstructure and mechanical properties of a low-silicon aluminum-added hot-rolled directly quenched and partitioned steel
Xiao-Dong Tan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
An ultrahigh strength steel with ultrafine-grained microstructure produced through intercritical deformation and partitioning process
Heping Liu et al.
MATERIALS & DESIGN (2015)
Effect of ultragrain refinement on quenching and partitioning steels manufactured by a novel method
Ran Ding et al.
MATERIALS & DESIGN (2015)
Microstructures resulting from the interaction between ferrite recrystallization and austenite formation in dual-phase steels
D. Barbier et al.
JOURNAL OF MATERIALS SCIENCE (2015)
Enhanced ductility and toughness in an ultrahigh-strength Mn-Si-Cr-C steel: The great potential of ultrafine filmy retained austenite
Guhui Gao et al.
ACTA MATERIALIA (2014)
Metallurgical Interpretation on Grain Refinement and Synergistic Effect of Mn and Ti in Ti-microalloyed Strip Produced by TSCR
Xin-ping Mao et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2014)
Microstructural analysis of martensite constituents in quenching and partitioning steels
M. J. Santofimia et al.
MATERIALS CHARACTERIZATION (2014)
Enhanced stability of retained austenite and consequent work hardening rate through pre-quenching prior to quenching and partitioning in a Q-P microalloyed steel
Jun Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Stability of retained austenite in multi-phase microstructure during austempering and its effect on the ductility of a low carbon steel
Z. J. Xie et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Microstructure evolution and mechanical properties of a hot-rolled directly quenched and partitioned steel containing proeutectoid ferrite
Yunbo Xu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Optimizing the Morphology and Stability of Retained Austenite in a δ-TRIP Steel
H. L. Yi et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
EFFECT OF PRECURSOR MICROSTRUCTURE ON MORPHOLOGY FEATURE AND MECHANICAL PROPERTY OF C-Mn-Si STEEL
Ren Yongqiang et al.
ACTA METALLURGICA SINICA (2013)
Inconsistent effects of mechanical stability of retained austenite on ductility and toughness of transformation-induced plasticity steels
Qian Zhou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
The effect of morphology on the stability of retained austenite in a quenched and partitioned steel
X. C. Xiong et al.
SCRIPTA MATERIALIA (2013)
Evolution of microstructure and mechanical properties of medium Mn steels during double annealing
A. Arlazarov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Retained austenite amount determination comparison in JIS SKD11 steel using quantitative metallography and X-ray diffraction methods
Yang-Yu Su et al.
ADVANCED COMPOSITE MATERIALS, PTS 1-3 (2012)
Enhanced work-hardening behavior and mechanical properties in ultrafine-grained steels with large-fractioned metastable austenite
Jie Shi et al.
SCRIPTA MATERIALIA (2010)
Microstructural Evolution of a Low-Carbon Steel during Application of Quenching and Partitioning Heat Treatments after Partial Austenitization
M. J. Santofimia et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Thermal stability of retained austenite in TRIP steels studied by synchrotron X-ray diffraction during cooling
NH van Dijk et al.
ACTA MATERIALIA (2005)
Austenite formation during intercritical annealing
J Huang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2004)
Effect of rolling reduction on ultrafine grained structure and mechanical properties of low-carbon steel thermomechanically processed from martensite starting structure
R Ueji et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2004)
Carbon partitioning into austenite after martensite transformation
J Speer et al.
ACTA MATERIALIA (2003)
On the influence of interactions between phases on the mechanical stability of retained austenite in transformation-induced plasticity multiphase steels
PJ Jacques et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2001)