Related references
Note: Only part of the references are listed.Wetting behavior of selective laser melted (SLM) bio-medical grade stainless steel 316L
Suryank Dwivedi et al.
MATERIALS TODAY-PROCEEDINGS (2022)
Tribological characteristics and advanced processing methods of textured surfaces: a review
Ze Wu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
Issues in fabrication of 3D components through DMLS Technique: A review
Mukul Anand et al.
OPTICS AND LASER TECHNOLOGY (2021)
Experimental and empirical model analysis of microsurface texturing on 316 L press-fit joints fabricated by selective laser melting
H. Sohrabpoor et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
The effect of laser scanning strategies on texture, mechanical properties, and site-specific grain orientation in selective laser melted 316L SS
Jithin James Marattukalam et al.
MATERIALS & DESIGN (2020)
Processing parameters in laser powder bed fusion metal additive manufacturing
J. P. Oliveira et al.
MATERIALS & DESIGN (2020)
Anisotropy in the microstructure and mechanical property for the bulk and porous 316L stainless steel fabricated via selective laser melting
Decheng Kong et al.
MATERIALS LETTERS (2019)
The enhancement of microstructure on the passive and pitting behaviors of selective laser melting 316L SS in simulated body fluid
Cheng Man et al.
APPLIED SURFACE SCIENCE (2019)
Mechanical properties and corrosion behavior of selective laser melted 316L stainless steel after different heat treatment processes
Decheng Kong et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Comprehensive effects of placement orientation and scanning angle on mechanical properties and behavior of 316L stainless steel based on the selective laser melting process
Zhengyan Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Crystallographic-orientation-dependent tensile behaviours of stainless steel 316L fabricated by laser powder bed fusion
Xianglong Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Stability of cellular microstructure in laser powder bed fusion of 316L stainless steel
Umberto Scipioni Bertoli et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Multi-Scale Surface Texturing in Tribology-Current Knowledge and Future Perspectives
Philipp G. Gruetzmacher et al.
LUBRICANTS (2019)
Development of hydroxyapatite coatings on laser textured 316 LSS and Ti-6Al-4V and its electrochemical behavior in SBF solution for orthopedic applications
S. Arul Xavier Stango et al.
CERAMICS INTERNATIONAL (2018)
Fabrication of micro-textured surfaces using ball-end micromilling for wettability enhancement of Ti-6Al-4V
Tej Pratap et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Mechanical micro-texturing of Ti-6Al-4V surfaces for improved wettability and bio-tribological performances
T. Pratap et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Topographical effects of laser surface texturing on various time-dependent wetting regimes in Ti6Al4V
Divyansh Singh Patel et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
Y. Kok et al.
MATERIALS & DESIGN (2018)
Bio-functional and anti-corrosive 3D printing 316L stainless steel fabricated by selective laser melting
Decheng Kong et al.
MATERIALS & DESIGN (2018)
Microstructure and mechanical properties of stainless steel 316L vertical struts manufactured by laser powder bed fusion process
Xianglong Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
A review on benchmark artifacts for evaluating the geometrical performance of additive manufacturing processes
Lara Rebaioli et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Tribological behavior of Ti6Al4V cellular structures produced by Selective Laser Melting
F. Bartolomeu et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Mechanical behavior of selective laser melted 316L stainless steel
Jyoti Suryawanshi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
The comprehensive effect of surface texture and roughness under hydrodynamic and mixed lubrication conditions
Chenbo Ma et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2017)
Tribological properties of dimple-textured titanium alloys under dry sliding contact
Ze Wu et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Transient experimental and modelling studies of laser-textured micro-grooved surfaces with a focus on piston-ring cylinder liner contacts
Francisco J. Profito et al.
TRIBOLOGY INTERNATIONAL (2017)
In-situ characterization of laser-powder interaction and cooling rates through high-speed imaging of powder bed fusion additive manufacturing
Umberto Scipioni Bertoli et al.
MATERIALS & DESIGN (2017)
On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting
Umberto Scipioni Bertoli et al.
MATERIALS & DESIGN (2017)
Additive manufacturing of metals
Dirk Herzog et al.
ACTA MATERIALIA (2016)
Dry sliding wear characteristics of in situ synthesized Al-TiC composites
Abhishek Kumar et al.
COMPOSITE INTERFACES (2016)
Saturated pool boiling of FC-72 from enhanced surfaces produced by Selective Laser Melting
J. Y. Ho et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)
A mixed lubrication model for studying tribological behaviors of surface texturing
Hui Zhang et al.
TRIBOLOGY INTERNATIONAL (2016)
Mixed lubrication problems in the presence of textures: An efficient solution to the cavitation problem with consideration of roughness effects
Chunxing Gu et al.
TRIBOLOGY INTERNATIONAL (2016)
Laser surface textured titanium alloy (Ti-6Al-4V) - Part II - Studies on bio-compatibility
Renu Kumari et al.
APPLIED SURFACE SCIENCE (2015)
Laser surface textured titanium alloy (Ti-6Al-4V): Part 1-Surface characterization
Wilhelm Pfleging et al.
APPLIED SURFACE SCIENCE (2015)
Human mesenchymal stem cell behavior on femtosecond laser-textured Ti-6Al-4V surfaces
Alexandre Cunha et al.
NANOMEDICINE (2015)
Tribological investigation of diamond-like carbon coated micro-dimpled surface under bovine serum and osteoarthritis oriented synovial fluid
Subir Ghosh et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2015)
Experimental analysis of tribological behavior of UHMWPE against AISI420C and against TiAl6V4 alloy under dry and lubricated conditions
Alessandro Ruggiero et al.
TRIBOLOGY INTERNATIONAL (2015)
An Additive Manufacturing Test Artifact
Shawn Moylan et al.
JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY (2014)
Wetting behaviour of femtosecond laser textured Ti-6Al-4V surfaces
Alexandre Cunha et al.
APPLIED SURFACE SCIENCE (2013)
Effect of laser surface texturing on Si3N4/TiC ceramic sliding against steel under dry friction
Xing Youqiang et al.
MATERIALS & DESIGN (2013)
The rigorous derivation of Young, Cassie-Baxter and Wenzel equations and the analysis of the contact angle hysteresis phenomenon
Gene Whyman et al.
CHEMICAL PHYSICS LETTERS (2008)
Effect of ion implantation on the corrosion behavior of iron, stainless steels, and aluminum - A review
E McCafferty
CORROSION (2001)