Related references
Note: Only part of the references are listed.Experimental and numerical investigations of the damages induced while drilling flax/epoxy composite
Mf Ameur et al.
JOURNAL OF COMPOSITE MATERIALS (2022)
Coupled thermo-mechanical modeling of drilling of multi-directional matrix laminates
Sagar Kubher et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)
Numerical study of GFRP joints bearing strength reduction due to drilling-induced delamination
M. Safarabadi et al.
JOURNAL OF COMPOSITE MATERIALS (2020)
Analytical study of delamination damage and delamination-free drilling method of CFRP composite
Zhenyuan Jia et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Experimental and numerical investigations on push-out delamination in drilling of composite laminates
R. Higuchi et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Experimental and numerical analysis of the influence of drill point angle when drilling biocomposites
A. Diaz-Alvarez et al.
COMPOSITE STRUCTURES (2019)
Advanced cutting tools and technologies for drilling carbon fibre reinforced polymer (CFRP) composites: A review
Norbert Geier et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Three-dimensional finite element modeling of drilling CFRP composites using Abaqus/CAE: a review
Gong-Dong Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Analysis of thrust force and delamination in drilling GFRP composites with candle stick drills
Liping Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Experimental characterization and finite element modeling of critical thrust force in cfrp drilling
Kamlesh Phapale et al.
MACHINING SCIENCE AND TECHNOLOGY (2018)
Research on milling strategies to reduce delamination damage during machining of holes in CFRP/Ti stack
Gong-Dong Wang et al.
COMPOSITE STRUCTURES (2018)
Prediction of critical thrust force for tubular composite in drilling-induced delamination by numerical and experimental analysis
H. Hocheng et al.
COMPOSITE STRUCTURES (2018)
Experimental and numerical analysis of step drill bit performance when drilling woven CFRPs
N. Feito et al.
COMPOSITE STRUCTURES (2018)
Three-dimensional numerical simulation for drilling of 2.5D carbon/carbon composites
Chenwei Shan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
New analytical model for delamination of CFRP during drilling
Franck Girot et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
A review on finite element method for machining of composite materials
Nagaraja Shetty et al.
COMPOSITE STRUCTURES (2017)
Tensile failure analysis and residual strength prediction of CFRP laminates with open hole
Mengli Xiao et al.
COMPOSITES PART B-ENGINEERING (2017)
2D and 3D Finite Element models for the edge trimming of CFRP
N. Duboust et al.
16TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (16TH CIRP CMMO) (2017)
A 3D FE modeling of machining process of Nomex® honeycomb core: influence of the cell structure behaviour and specific tool geometry
M. Jaafar et al.
16TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (16TH CIRP CMMO) (2017)
Modelling the orthogonal cutting of UD-CFRP composites: Development of a novel cohesive zone model
Alessandro Abena et al.
COMPOSITE STRUCTURES (2017)
In process monitoring of cutting temperature during the drilling of FRP laminate
L. Sorrentino et al.
COMPOSITE STRUCTURES (2017)
Experimental and numerical analysis on drilling of carbon fibre reinforced plastic and aluminium stacks
R. Zitoune et al.
COMPOSITE STRUCTURES (2016)
Numerical analysis of the influence of tool wear and special cutting geometry when drilling woven CFRPs
N. Feito et al.
COMPOSITE STRUCTURES (2016)
Numerical Modeling of Stacked Composite CFRP/Ti Machining under Different Cutting Sequence Strategies
Jinyang Xu et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2016)
Delamination and Surface Roughness Analyses in Drilling Hybrid Carbon/Glass Composite
C. L. Tan et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Numerical modeling and FE analysis of CFRP/Ti stack orthogonal cutting
Jinyang Xu et al.
7TH HPC 2016 - CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING (2016)
Numerical analysis of the interaction between the cutting forces, induced cutting damage, and machining parameters of CFRP composites
S. Zenia et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Modelling of cutting fibrous composite materials: current practice
F. Kahwash et al.
3RD CIRP GLOBAL WEB CONFERENCE - PRODUCTION ENGINEERING RESEARCH ADVANCEMENT BEYOND STATE OF THE ART (CIRPE2014) (2015)
A finite element simulation for orthogonal cutting of UD-CFRP incorporating a novel fibre-matrix interface model
Alessandro Abena et al.
15TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (15TH CMMO) (2015)
Numerical prediction of delamination in CFRP drilling
N. Feito et al.
COMPOSITE STRUCTURES (2014)
Three-dimensional numerical modelling of drilling of carbon fiber-reinforced plastic composites
Ozden Isbilir et al.
JOURNAL OF COMPOSITE MATERIALS (2014)
Drilling Characteristics of Sisal Fiber-Reinforced Epoxy and Polypropylene Composites
Kishore Debnath et al.
MATERIALS AND MANUFACTURING PROCESSES (2014)
Finite Element Modeling of Carbon Fiber Composite Orthogonal Cutting and Drilling
Shuji Usui et al.
6TH CIRP INTERNATIONAL CONFERENCE ON HIGH PERFORMANCE CUTTING (HPC2014) (2014)
Induced drilling strains in glass fibre reinforced epoxy composites
J. P. Nobre et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2013)
Numerical investigation of the effects of drill geometry on drilling induced delamination of carbon fiber reinforced composites
Ozden Isbilir et al.
COMPOSITE STRUCTURES (2013)
Experimental and numerical investigation on bolted composite joint made by vacuum assisted resin injection
Song Zhou et al.
COMPOSITES PART B-ENGINEERING (2013)
A review of modeling and control during drilling of fiber reinforced plastic composites
Amrinder Pal Singh et al.
COMPOSITES PART B-ENGINEERING (2013)
Drilling behavior of sisal fiber-reinforced polypropylene composite laminates
Pramendra Kumar Bajpai et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2013)
Drilling of woven glass fiber-reinforced plastic-an experimental and finite element study
Nilanjan Das Chakladar et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Delamination prediction in orthogonal machining of carbon long fiber-reinforced polymer composites
C. Santiuste et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2012)
Analytical models of composite material drilling
Pierre Rahme et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)
Evaluation of drilling parameters on thrust force in drilling carbon fiber reinforced plastic (CFRP) composite laminates using compound core-special drills
C. C. Tsao et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)
Experimental investigation and optimisation in drilling of GFRP composites
K. Palanikumar
MEASUREMENT (2011)
Machining FEM model of long fiber composites for aeronautical components
Carlos Santiuste et al.
COMPOSITE STRUCTURES (2010)
A discrete element method for the simulation of CFRP cutting
D. Iliescu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Characterization of the dry high speed drilling process of woven composites using Machinability Maps approach
Sanjay Rawat et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2009)
Drill geometry and operating effects when cutting small diameter holes in CFRP
I. S. Shyha et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Numerical prediction of delamination onset in carbon/epoxy composites drilling
L. M. P. Durao et al.
ENGINEERING FRACTURE MECHANICS (2008)
Effects of high speed in the drilling of glass fibre reinforced plastic: Evaluation of the delamination factor
J. Campos Rubio et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Multiphase Finite Element Modeling of Machining Unidirectional Composites: Prediction of Debonding and Fiber Damage
Chibmaya R. Dandekar et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2008)
Analysis of parametric influence on delamination in high-speed drilling of carbon fiber reinforced plastic composites
V. N. Gaitonde et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
The effect of cutting tool geometry on thrust force and delamination when drilling glass fibre reinforced plastic composite
A. M. Abrao et al.
MATERIALS & DESIGN (2008)
Experimental study of drilling composite materials with step-core drill
C. C. Tsao
MATERIALS & DESIGN (2008)
Drilling of uni-directional glass fiber reinforced plastics: Experimental and finite element study
I. Singh et al.
MATERIALS & DESIGN (2008)
Effect of point geometry and their influence on thrust and delamination in drilling of polymeric composites
A. Velayudham et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Numerical prediction of the thrust force responsible of delamination during the drilling of the long-fibre composite structures
Redouane Zitoune et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Effects of special drill bits on drilling-induced delamination of composite materials
H. Hocheng et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
Drilling of uni-directional glass fiber reinforced plastic (UD-GFRP) composite laminates
I Singh et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)
Numerical simulation of the drilling process on carbon/epoxy composite laminates
L. M. P. Durao et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Fibre reinforced composites in aircraft construction
C Soutis
PROGRESS IN AEROSPACE SCIENCES (2005)
Investigation on thrust in vibration drilling of fiber-reinforced plastics
X Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
The effect of chisel length and associated pilot hole on delamination when drilling composite materials
CC Tsao et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2003)
The performance of coated tungsten carbide drills when machining carbon fibre-reinforced epoxy composite materials
C Murphy et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2002)
Quality assessment and delamination force evaluation in drilling glass fibre-reinforced plastic laminates - a finite element analysis and linear elastic fracture mechanics approach
DA Budan et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2002)
Drilling of multi-layer composite materials consisting of carbon fiber reinforced plastics (CFRP), titanium and aluminum alloys
E Brinksmeier et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2002)
Modeling delamination growth in laminated composites
F Shen et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2001)
A finite element model for the orthogonal cutting of fiber-reinforced composite materials
M Mahdi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Fatigue crack growth in polyethylene: Material dependence. I: Tensile/compressive loading
JP Harcup et al.
POLYMER ENGINEERING AND SCIENCE (2000)