☆ 4.7 Review

Recent progress of Mg-Sn based alloys: the relationship between aging response and mechanical performance

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Effect of Bi and Zn Additions on the Microstructures and Mechanical Properties of As-Cast Mg-7Sn-2Al-Based Alloys

Rui Feng et al.

Summary: The addition of Bi and Zn can refine the microstructure and grain size of Mg-7Sn-2Al-based alloys, leading to the formation of Mg3Bi2 and Mg2Sn phases. The microstructural refinement enhances the strength of the alloys without significant loss of ductility. The ultimate tensile and compressive strengths are significantly increased, while the final tensile elongation slightly decreases but the compressive elongation shows a slight increase.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Ce addition on hot deformation behavior and microstructure evolution of AZ80 magnesium alloy

Zhu-Jin Li et al.

Summary: The addition of Ce has significant effects on the hot deformation behavior and microstructure evolution of AZ80 magnesium alloys. The presence of Ce increases the peak stress and weakens the texture of the AZ80-Ce alloy, while promoting recrystallization and reducing dislocation density.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Chemistry, Physical

Enhanced tensile strength and ductility of an Al-6Si-3Cu alloy processed by room temperature rolling

Xiaoru Zhuo et al.

Summary: This study demonstrates the production of an Al-6Si-3Cu alloy with excellent mechanical performance through combined heat treatment and room temperature rolling. The alloy exhibits improved strength and ductility compared to conventional as-cast alloys.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Al on the Microstructure and Mechanical Properties of Mg-Sn-Ca-Mn Wrought Alloy

Yun Feng et al.

Summary: The influence of aluminum on the mechanical properties and microstructure of Mg-Sn-Ca-Mn alloys was systematically investigated, and the addition of 1.5 wt% Al significantly increased the yield strength of the alloy. The extruded alloy exhibited a bimodal grain structure with dynamic recrystallized fine grains and coarse unrecrystallized grains. Additionally, the alloy with 1.5 wt% Al showed a significant enhancement in fiber texture.

METALS AND MATERIALS INTERNATIONAL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Strain dependency of dynamic recrystallization during thermomechanical processing of Mg-Gd-Y-Zn-Zr alloy

Z. Aalipour et al.

Summary: The microstructure and microtexture changes of an extruded and annealed magnesium alloy were investigated under different strain and processing conditions. The results showed that the material underwent noticeable refinement even at low applied compressive strain. Recrystallization process was completed at a true strain of 0.3, and grain refinement was attributed to the LSN and CDRX mechanisms. At higher strain levels, most grains were found in deformed states and the microtexture only changed in terms of intensity.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Forming novel texture and enhancing the formability in Mg-3Al-Zn alloy sheets fabricated by transverse gradient extrusion

Jun Xu et al.

Summary: The transverse gradient extrusion (TGE) process was proposed for fabricating Mg-3Al-1Zn (AZ31) alloy sheet with tailored strong basal texture. A novel texture was formed in the TGE sheet, tilted about 65 degrees from normal direction (ND) to extrusion direction (ED), and elongated along the transverse direction (TD). The TGE sheet exhibited a large Erichsen value compared to the conventional extruded (CE) sheet, thanks to its unique texture and uniform fined grain structure.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Recent progress of novel biodegradable zinc alloys: from the perspective of strengthening and toughening

Xiaoru Zhuo et al.

Summary: Zn and its alloys are considered as the most promising biodegradable metallic materials for clinical applications due to their suitable degradation rate, fully bioresorbable degradation products, and excellent biocompatibility. However, their strength and ductility are generally below the mechanical benchmark for biodegradable implants, limiting wider applications. Significant efforts have been made in the past decade to improve the mechanical performance of Zn alloys, advancing our understanding of Zn alloy development.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Improvement of stretch formability and weakening the basal texture of Mg alloy by corrugated wide limit alignment and annealing process

Hui-Hu Lu et al.

Summary: This study used the corrugated wide limit alignment (CWLA) process to improve the stretch formability of large-dimension AZ31 Mg alloy sheets by inducing tensile twins. The effects of {10 (1 ) over bar 2} tensile twins on microstructure evolution, mechanical properties, and stretch formability of the AZ31 Mg alloy sheet were investigated. The results showed that the CWLA samples exhibited a weakened basal texture and a high fraction of twin boundaries, leading to improved mechanical properties and stretch formability.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Equal Channel Angular Pressing on the Microstructure and Mechanical Properties of an Mg-5Sn Alloy

Xiaoru Zhuo et al.

Summary: An Mg-5Sn alloy was processed by ECAP, and the microstructure evolution and mechanical properties were studied. The grain size, amount of Mg2Sn precipitates, and texture varied with the number of passes. ECAP alloys showed improved strengths due to various strengthening mechanisms. The UTS increased while the EL decreased with increasing ECAP pass.

METALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Tensile Properties and Corrosion Behavior of a Dilute Mg-0.5Sn-0.7Al-0.8Zn Alloy Applied for Biomaterials

Weili Cheng et al.

Summary: The novel dilute Mg-0.5Sn-0.7Al-0.8Zn alloy, directly extruded after casting, exhibited a fine bimodal grained microstructure, local nano-precipitates micro-region, and typical extrusion direction (ED)-tilted texture. It achieved a great balance between tensile properties and corrosion resistance, suggesting its potential for development as a biomaterial.

METALS AND MATERIALS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Investigation of As-Cast and Homogenized Microstructure in Mg-6 wt% Sn-1 wt% Al Alloy: An Experimental and Modelling Study

Ashutosh Jena et al.

Summary: A wedge casting experiment was conducted on ternary Mg-6 wt% Sn-1 wt% Al alloy to investigate the solidified microstructure under a wide range of cooling rates. The study revealed the dissolution of total secondary phases within 1 hour at 793 K and within 12-24 hours at 743 K. Modeling simulations were used to analyze the experimental results and a diffusion-based homogenization model was proposed to study microstructural changes during solution treatment in the ternary alloy.

METALS AND MATERIALS INTERNATIONAL (2021)

Add to Collection

Article Engineering, Mechanical

Tension-compression asymmetry and the underlying slip/twinning activity in extruded Mg - Y sheets

D. D. Yin et al.

Summary: The addition of different concentrations of Y significantly affected the mechanical properties, grain-scale slip activity, and orientation heterogeneity of extruded Mg alloys during tension and compression. Increasing Y content led to noticeable changes in slip activity, while tension-compression asymmetry also showed variations.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

Add to Collection

Article Thermodynamics

A thermodynamic assessment of the Mg-Sn-Sb ternary system

Jiyuan Zhang et al.

Summary: The thermodynamic assessment of the Mg-Sn-Sb system using CALPHAD approach provides a basis for alloy design of magnesium alloy with high-creep resistance and the alloy-type anode of magnesium recharge battery. The consistency of the calculated phase equilibria relations and thermochemical properties with available experimental data of the ternary system is presented.

CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Toward the development of Mg alloys with simultaneously improved strength and ductility by refining grain size via the deformation process

Zhi Zhang et al.

Summary: Grain size significantly influences the strength and ductility of magnesium alloys, and refining grain size is a feasible strategy to prepare high-performance magnesium alloys. Further research and discussion on the effects of grain size on various magnesium alloys are needed to fully understand the key mechanisms.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

A simultaneous enhancement of both strength and ductility by a novel differential-thermal ECAP process in Mg-Sn-Zn-Zr alloy

Tianshui Zhou et al.

Summary: The innovative differential-thermal ECAP process developed in this study enables Mg-SnZn-Zr (TZK) alloys to have good deformability and superior mechanical properties by activating non-basal slip, refining grains, and weakening texture. This new process provides beneficial insights into the development of high-performance Mg alloys.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Offsetting strength-ductility tradeoff in Mg-Sn-Zn-Zr alloy by a novel differential-thermal ECAP process

Tianshui Zhou et al.

Summary: A novel differential-thermal ECAP process (DTECAP) combined with pre-aging treatment (T6) was developed to enhance the strength and ductility of Mg-Sn-Zn-Zr (TZK) alloys, achieving a superior balance of comprehensive properties. The excellent properties were attributed to the activation of {10-12} tension twin variants and non basal slips, as well as the benefits of grain refinement and texture transition. This work provides new insights for the development of high-performance Mg alloys using T6-DTECAP processing.

MATERIALS LETTERS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Improving Strength and Electromagnetic Shielding Effectiveness of Mg-Sn-Zn-Ca-Ce Alloy by Sn Addition

Junliu Ye et al.

Summary: Alloying with Sn in Mg-xSn-Zn-Ca-Ce alloys can simultaneously increase both strength and electromagnetic shielding effectiveness. This is achieved through grain refinement, texture strengthening, and precipitation strengthening, resulting in regularly arranged Mg2Sn precipitates in the basal plane, contributing to great electromagnetic shielding capability.

ADVANCED ENGINEERING MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Electrochemical behaviors and discharge performance of Mg-Sn binary alloys as anodes for Mg-air batteries

Lu Han et al.

Summary: The study investigated the self-corrosion and discharge performance of as-cast Mg-xSn anodes with different Sn content for primary Mg-air batteries. It was found that the Mg-1Sn anode exhibited the best performance due to its high electrochemical activity and dispersed micron-sized Mg2Sn phase in the matrix, aiding in uniform dissolution.

MATERIALS RESEARCH EXPRESS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of eutectic Si size on the flow behavior and hot processing map of near eutectic Al-Si alloys

Xiaoru Zhuo et al.

Summary: The flow behavior of three near eutectic Al-Si alloys with different average eutectic Si sizes was investigated by isothermal compression tests. It was found that the eutectic Si size affects not only the flow behavior but also the processing map of the alloys. The strain-compensated constitutive equations depend on eutectic Si size and the processing maps of the alloys exhibit different characteristics.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of undissolved second-phase particles on dynamic recrystallization behavior of Mg-7Sn-1Al-1Zn alloy during low- and high-temperature extrusions

Hyun Ji Kim et al.

Summary: The study found that fine particles can retard dynamic recrystallization through the Zener pinning effect, resulting in the formation of a bimodal recrystallized grain structure with excessively grown grains. In contrast, coarse particles promote dynamic recrystallization through particle-stimulated nucleation phenomenon, leading to the formation of a more uniform recrystallized grain size.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Simultaneously improved strength and toughness of a Mg?Sn alloy through abundant prismatic lath-shaped precipitates

Y. J. Wan et al.

Summary: By intentionally transforming the habit planes of lath-shaped Mg2Sn precipitates in Mg-Sn alloy from basal plane to prismatic plane, the strength and toughness of the alloy were significantly enhanced, with the compressive yield strength (CYS) and compression to failure (CF) increasing by 137% and 75% respectively. This was attributed to the significant obstacle effect of the abundant prismatic laths on basal slip and twinning.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of Zn/Al mass ratio on microstructure evolution and mechanical properties of Mg-Sn based alloys

Yuxiao Luo et al.

Summary: The effects of Zn/Al mass ratio on the microstructure evolution and mechanical properties of the Mg-3Sn-5Zn-xAl (x=0,1,2,3 wt%) alloy were systematically investigated. The addition of Al led to improved tensile yield strength and ultimate tensile strength, but slightly reduced the volume fraction of recrystallized region. The excellent ductility of the extruded alloys was attributed to the activation of non-basal slip systems, high volume fraction of fine DRXed grains, and weakened texture.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of post-heat treatment on microstructure, tensile properties, and bending properties of extruded AZ80 alloy

Gyo Myeong Lee et al.

Summary: This study investigates the effects of post-heat treatments on microstructural characteristics, uniaxial tensile properties, and three-point bending properties of an extruded AZ80 alloy. Different heat treatments result in variations in the material's performance, mainly due to differences in grain size and precipitate amount.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Newly observed irrational crystallographic features of non-basal Mg2Sn precipitates in a Mg-4Sn alloy aged at 160 °C

Xuefei Huang et al.

Summary: Two novel types of irrational orientation relationships between beta-Mg2Sn precipitates and the alpha-Mg matrix were observed in a Mg-4Sn alloy aged at 160 degrees C. The crystallographic features of these precipitates and their interface orientations were analyzed and interpreted through methods such as the good matching sites (GMS) method. The preferences of the precipitates with different irrational orientation relationships were also discussed through examining the lattice matching condition across the interfaces with the matrix.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Electron beam irradiation induced metastable phase in a Mg-9.8 wt%Sn alloy

Chaoqiang Liu et al.

Summary: Aberration-corrected scanning transmission electron microscopy was used to study a novel metastable phase, beta '' phase, induced by electron beam irradiation in a Mg-9.8 wt.%Sn alloy. The phase has a spherical D0(19) structure and formation involves solely the ordering of Sn atoms in the solid solution magnesium matrix, with an energetically favored process according to first-principles calculations.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Enhanced mechanical properties and corrosion resistance of rolled Mg-1.5Sn-0.5Ca alloy by Ce microalloying

Chunming Wang et al.

Summary: The addition of minor cerium refines the microstructure, enhances the strength and ductility of the alloy, and improves its corrosion resistance.

MATERIALS CHARACTERIZATION (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Ameliorating mechanical properties and reducing anisotropy of as-extruded Mg-1.0Sn-0.5Ca alloy via Al addition

Yanfu Chai et al.

Summary: The addition of Al to a Mg-Sn-Ca alloy leads to grain refinement, accelerated generation of second phase, and changes in texture, resulting in improved mechanical properties.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Prediction of precipitation kinetics and strengthening in FeMnAlC lightweight steels

Jaeeun Lee et al.

Summary: Fe-Al-Mn-C steels exhibit superior mechanical properties, with the formation of nanoscale precipitates like κ-carbides significantly impacting their mechanical performance. Researchers conducted thermokinetic simulations to predict phase fraction and size of precipitates, evaluated precipitation strengthening models, and calculated total yield strength considering various strengthening mechanisms.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Age hardening responses of as-extruded Mg-2.5Sn-1.5Ca alloys with a wide range of Al concentration

Qiuyan Huang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of minor Ce additions on the microstructure and mechanical properties of Mg-1.0Sn-0.6Ca alloy

Yanfu Chai et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Physical

Grain refinement mechanism and improved mechanical properties in Mg-Sn alloy with trace Y addition

X. Y. Qian et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Metallurgical Assessment of Novel Mg-Sn-La Alloys Produced by High-Pressure Die Casting

Azim Gokce

METALS AND MATERIALS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Macro-alloying Effects of Al and Ag on the Age-Hardening Behavior and Precipitates Microstructure of a Mg-4Sn Alloy

Xuefei Huang et al.

JOM (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of Mn addition on the microstructure and mechanical properties of Mg-Zn-Sn alloys

Caihong Hou et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Materials Science, Multidisciplinary

The microstructure and mechanical properties of low-temperature and low-speed extruded Mg-3Sn-2Al-1Zn alloy

Xudong Yan et al.

MATERIALS SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Microstructure, Texture Evolution, and Mechanical Properties of ECAP-Processed ZAT522 Magnesium Alloy

Ying Ma et al.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Precipitation on stacking faults in Mg-9.8wt%Sn alloy

C. Q. Liu et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Microstructural evolution and creep properties of Mg-4Sn alloys by addition of calcium up to 4 wt.%

Amir Baghani et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2020)

Add to Collection

Article Engineering, Civil

The microstructure and creep properties of as-cast Mg-Sn-Si-(Al) magnesium alloys

Tomasz Rzychon

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Improving toughness of a Mg2Ca-containing Mg-Al-Ca-Mn alloy via refinement and uniform dispersion of Mg2Ca particles

Huan Liu et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Fragmentation of 18R LPSO phases through multi-pass equal channel angular pressing and its impact on rollability of Mg97Y2Zn1 (at%) alloy

Chao Sun et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Role of Cerium on the creep properties of the Mg-Sn-Al based alloys

Asli Onur et al.

INTERNATIONAL JOURNAL OF CAST METALS RESEARCH (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of Zn and Ca addition on microstructure and mechanical properties of as-extruded Mg-1.0Sn alloy sheet

Yanfu Chai et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of Mn addition on the microstructures, mechanical properties and work-hardening of Mg-1Sn alloy

Hongxin Liao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Add to Collection

Article Materials Science, Multidisciplinary

The microstructure, mechanical properties and corrosion behaviour of Ce-containing Mg-3Sn-1Ca alloy

Liu Yang et al.

MATERIALS SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Physical

Improvement of mechanical properties and reduction of yield asymmetry of extruded Mg-Sn-Zn alloy through Ca addition

Yanfu Chai et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Irrational crystallography of the <1 1 (2)over-bar 0>Mg Mg2Sn precipitates in an aged Mg-Sn-Mn alloy

Xuefei Huang et al.

MATERIALS CHARACTERIZATION (2019)

Add to Collection

Article Nanoscience & Nanotechnology

A new rare-earth-free Mg-Sn-Ca-Mn wrought alloy with ultra-high strength and good ductility

Aiyue Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and mechanical property of high strength Mg-Sn-Zn-Al alloys

Yun Li et al.

MATERIALS SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Biomaterials

Microstructure, mechanical and corrosion properties of novel Mg-Sn-Ce alloys produced by high pressure die casting

Selma Ozarslan et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

Add to Collection

Article Metallurgy & Metallurgical Engineering

On the improved tensile strength and ductility of Mg-Sn-Zn-Mn alloy processed by aging prior to extrusion

Liping Zhong et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Development of low-alloyed and rare-earth-free magnesium alloys having ultra-high strength

Hucheng Pan et al.

ACTA MATERIALIA (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Metastable precipitate phases in Mg-9.8 wt%Sn alloy

C. Q. Liu et al.

ACTA MATERIALIA (2018)

Add to Collection

Article Chemistry, Physical

On the microstructure and mechanical property of as-extruded Mg-Sn-Zn alloy with Cu addition

Yongjian Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Chemistry, Physical

Enhanced age-hardening response and compression property of a Mg-7Sn-1Ca-1Ag (wt.%) alloy by extrusion combined with aging treatment

Wandong Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Chemistry, Physical

Improving tensile properties of Mg-Sn-Zn magnesium alloy sheets using pre-tension and ageing treatment

Tong Hu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Chemistry, Physical

Controlling the microstructure and improving the tensile properties of extruded Mg-Sn-Zn alloy through Al addition

Sang-Hoon Kim et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

The effect of Cerium addition on microstructure and mechanical properties of high pressure die cast Mg-5Sn alloy

Guven Yarkadas et al.

MATERIALS CHARACTERIZATION (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure and mechanical properties of as-cast and as-hot-rolled novel Mg-xSn-2.5Zn-2Al alloys (x=2, 4 wt%)

Zhang-Zhi Shi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of Sn content on strain hardening behavior of as-extruded Mg-Sn alloys

Chaoyue Zhao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Underlying mechanisms of drastic reduction in yield asymmetry of extruded It Mg-Sn-Zn alloy by Al addition

Sang-Noon Kim et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Materials Science, Multidisciplinary

The effect of multiple precipitate types and texture on yield asymmetry in Mg-Sn-Zn(-Al-Na-Ca) alloys

A. E. Davis et al.

ACTA MATERIALIA (2018)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Microstructure and mechanical properties of as-extruded Mg-Sn-Zn-Ca alloy with different extrusion ratios

Yang Zhang et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2018)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effect of Si addition on microstructure and wear properties of Mg-Sn as-cast alloys

Erdem Karakulak et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2018)

Add to Collection

Article Chemistry, Physical

Effects of Ag content on the solid-solution and age-hardening behavior of a Mg-5Sn alloy

Xuefei Huang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Chemistry, Physical

Strengthening effect of nano and micro-sized precipitates in the hot-extruded Mg-5Sn-3Zn alloys with Ca addition

L. L. Chang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

A near row matching approach to prediction of multiple precipitation crystallography of compound precipitates and its application to a Mg/Mg2Sn system

W. Z. Zhang et al.

JOURNAL OF MATERIALS SCIENCE (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Row-matching in pyramidal Mg2Sn precipitates in Mg-Sn-Zn alloys

Zhang-Zhi Shi et al.

JOURNAL OF MATERIALS SCIENCE (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Improved tensile properties of an equal channel angular pressed (ECAPed) Mg-8Sn-6Zn-2A1 alloy by prior aging treatment

Weili Cheng et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of Zn addition on the microstructure and mechanical properties of cast, rolled and extruded Mg-6Sn-xZn alloys

N. El Mahallawy et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructures and mechanical properties of Mg2Sn-nanophase reinforced Mg-Mg2Sn composite

Canfeng Fang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of Ca, Ag addition on the microstructure and age-hardening behavior of a Mg-7Sn (wt%) alloy

Wandong Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Microstructural features of Mg-8%Sn alloy and its correlation with mechanical properties

Palash Poddar et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2017)

Add to Collection

Review Metallurgy & Metallurgical Engineering

Recent research and developments on wrought magnesium alloys

Sihang You et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Nucleation and preferential growth mechanism of recrystallization texture in high purity binary magnesium-rare earth alloys

Aidin Imandoust et al.

ACTA MATERIALIA (2017)

Add to Collection

Article Chemistry, Physical

Microstructure evolution of as-cast Mg-5Sn alloy with Ba addition

Yan Jiang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection

Article Chemistry, Physical

Grain refinement and reduced yield asymmetry of extruded Mg-5Sn-1Zn alloy by Al addition

Beomcheol Kim et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure, Mechanical Properties, Corrosion Behavior and Biocompatibility of As-Extruded Biodegradable Mg-3Sn-1Zn-0.5Mn Alloy

Lida Hou et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Influence of Ce addition and homogenization temperature on microstructural evolution and mechanical properties of extruded Mg-Sn-Al-Zn alloy

Sang-Hoon Kim et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Improvement of aging kinetics and precipitate size refinement in Mg-Sn alloys by hafnium additions

S. Behdad et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of extrusion and Ag, Zn addition on the age-hardening response and microstructure of a Mg-7Sn alloy

Xuefei Huang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Superplasticity and load relaxation behavior of extruded Mg-8Sn-3Al-1Zn alloy at 250 °C

Beomcheol Kim et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection

Article Nanoscience & Nanotechnology

The microstructure and impression creep behavior of cast Mg-4Sn-4Ca alloy

Hamid Khalilpour et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection

Article Nanoscience & Nanotechnology

On the dynamic mechanical property and deformation mechanism of as-extruded Mg-Sn-Ca alloys under tension

Qiuyan Huang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Cu/Zn on microstructure and mechanical properties of extruded Mg-Sn alloys

Hucheng Pan et al.

MATERIALS SCIENCE AND TECHNOLOGY (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Role of secondary phase in microstructural stability of as-extruded Mg-Sn-Ca at high temperature

J. Zhang et al.

MATERIALS SCIENCE AND TECHNOLOGY (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Interphase boundary segregation of Zn in Mg-Sn-Zn alloys

Chaoqiang Liu et al.

SCRIPTA MATERIALIA (2016)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Microstructure, mechanical and bio-corrosion properties of as-extruded Mg-Sn-Ca alloys

Chao-yong Zhao et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Comparative studies on evolution behaviors of 14H LPSO precipitates in as-cast and as-extruded Mg-Y-Zn alloys during annealing at 773 K

Huan Liu et al.

MATERIALS & DESIGN (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Strong and ductile heat-treatable Mg-Sn-Zn-Al wrought alloys

T. T. Sasaki et al.

ACTA MATERIALIA (2015)

Add to Collection

Article Thermodynamics

Microstructures and Thermal Properties of Mg-Sn-Ca Alloys: Casts and Extrusions

Jung-Han Kim et al.

INTERNATIONAL JOURNAL OF THERMOPHYSICS (2015)

Add to Collection

Article Chemistry, Physical

Effect of aging prior to extrusion on the microstructure and mechanical properties of Mg-7Sn-1Al-1Zn alloy

Jae-Gil Jung et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Add to Collection

Article Chemistry, Physical

Effect of homogenization temperature on the microstructure and mechanical properties of extruded Mg-7Sn-1Al-1Zn alloy

Sung Hyuk Park et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Preparation and characterization of as-extruded Mg-Sn alloys for orthopedic applications

Chaoyong Zhao et al.

MATERIALS & DESIGN (2015)

Add to Collection

Article Materials Science, Multidisciplinary

High pressure aging synthesis of a hexagonal Mg2Sn strengthening precipitate in Mg-Sn alloys

Hui Fu et al.

MATERIALS LETTERS (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Improving the tensile strength of Mg-7Sn-1Al-1Zn alloy through artificial cooling during extrusion

Sung Hyuk Park et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of Li on microstructure, mechanical properties and fracture mechanism of as-cast Mg-5Sn alloy

Yan Jiang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of Y and Ce additions on microstructure and mechanical properties of Mg-Zn-Zr alloys

Lizi Liu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructures and mechanical properties of as-extruded Mg-5Sn-1Zn-xAl (x=1, 3 and 5) alloys

Jia She et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructures and mechanical properties of as-extruded Mg-5Sn-1Zn-xAl (x=1, 3 and 5) alloys

Jia She et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Characterization and interpretation of twin related row-matching orientation relationships between Mg2Sn precipitates and the Mg matrix

Zhang-Zhi Shi et al.

JOURNAL OF APPLIED CRYSTALLOGRAPHY (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Enhancing mechanical properties of Mg-Sn alloys by combining addition of Ca and Zn

Hucheng Pan et al.

MATERIALS & DESIGN (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties of as aged Mg-3Sn-1Al and Mg-3Sn-2Zn-1Al alloy

Y. Chen et al.

MATERIALS SCIENCE AND TECHNOLOGY (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of Zn on microstructure and mechanical property of Mg-3Sn-1Al alloys

Yu'an Chen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and tensile properties of new type of hot rolled Mg-3Sn-1Zn alloy sheet at elevated temperatures

D. Luo et al.

MATERIALS SCIENCE AND TECHNOLOGY (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Characterization and interpretation of interfacial structure of the Mg2Sn laths in an Mg-Sn-Mn-Ag-Zn alloy

X. -F. Huang et al.

PHILOSOPHICAL MAGAZINE LETTERS (2014)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Strengthening mechanisms of indirect-extruded Mg-Sn based alloys at room temperature

Wei Li Cheng et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2014)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Microstructures and mechanical properties of extruded Mg-2Sn-xYb (x = 0, 0.1, 0.5 at.%) sheets

Jing Jiang et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2014)

Add to Collection

Article Chemistry, Physical

Role of icosahedral phase in enhancing the strength of Mg-Sn-Zn-Al alloy

Y. K. Kim et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2013)

Add to Collection

Article Chemistry, Physical

Effect of Ag and Cu trace additions on the microstructural evolution and mechanical properties of Mg-5Sn alloy

S. Jayalakshmi et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2013)

Add to Collection

Article Chemistry, Physical

The crystallography of lath-shaped Mg2Sn precipitates in a Mg-Sn-Zn-Mn alloy

Z. -Z. Shi

JOURNAL OF ALLOYS AND COMPOUNDS (2013)

Add to Collection

Article Chemistry, Physical

Effects of minor Ti addition on as-cast microstructure and mechanical properties of Mg-3Sn-2Sr (wt.%) magnesium alloy

Mingbo Yang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Newly observed prismatic Mg2Sn laths in a Mg-Sn-Zn-Mn alloy

Z. -Z. Shi et al.

JOURNAL OF MATERIALS SCIENCE (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Precipitation of DO19 type metastable phase in Mg-Sn alloy

Y. K. Kim et al.

MATERIALS LETTERS (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Strong strain hardening ability in an as-cast Mg-3Sn-1Zn alloy

Dan Luo et al.

MATERIALS LETTERS (2013)

Add to Collection

Article Materials Science, Biomaterials

Structure, mechanical properties, corrosion behavior and cytotoxicity of biodegradable Mg-X (X = Sn, Ga, In) alloys

J. Kubasek et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Compositional optimization of Mg-Sn-Al alloys for higher age hardening response

F. R. Elsayed et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Secondary Coincidence Site Lattice Model for Truncated Triangular β-Mg2Sn Precipitates in a Mg-Sn-Based Alloy

Z-Z Shi et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Enhanced age-hardening response and microstructure study of an Ag-modified Mg-Sn-Zn based alloy

Z. -Z. Shi et al.

PHILOSOPHICAL MAGAZINE LETTERS (2013)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Microstructure and mechanical properties of as-cast Mg-Sn-Ca alloys and effect of alloying elements

K. Suresh et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Improved age-hardening behavior of Mg-Sn-Mn alloy by addition of Ag and Zn

X. -F. Huang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

Add to Collection

Article Nanoscience & Nanotechnology

Extruded Mg-Zn-Ca-Mn alloys with low yield anisotropy

S. W. Xu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure and mechanical properties of conventional cast and rheocast Mg-Sn based alloys

Palash Poddar et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Crystallography of Mg2Sn precipitates with two newly observed orientation relationships in an Mg-Sn-Mn alloy

Z. -Z. Shi et al.

MATERIALS SCIENCE AND TECHNOLOGY (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of minor additions of Ce and Y on as cast microstructure of Mg-3Sn-2Ca magnesium alloy

M. B. Yang et al.

MATERIALS SCIENCE AND TECHNOLOGY (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Characterization and interpretation of the morphology of a Mg2Sn precipitate with irrational facets in a Mg-Sn-Mn alloy

Z. -Z. Shi et al.

PHILOSOPHICAL MAGAZINE (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Tensile properties of hot rolled Mg-3Sn-1Ca alloy sheets at elevated temperatures

G. H. Hasani et al.

MATERIALS & DESIGN (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of the Zn content on the microstructure and mechanical properties of indirect-extruded Mg-5Sn-xZn alloys

W. N. Tang et al.

MATERIALS & DESIGN (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of zirconium addition on as-cast microstructure and mechanical properties of Mg-3Sn-2Ca magnesium alloy

Mingbo Yang et al.

MATERIALS & DESIGN (2011)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of double aging and microalloying on the age hardening behavior of a Mg-Sn-Zn alloy

T. T. Sasaki et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

Add to Collection

Article Nanoscience & Nanotechnology

Low-temperature superplasticity of extruded Mg-Sn-Al-Zn alloy

S. S. Park et al.

SCRIPTA MATERIALIA (2011)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effects of heat treatment on microstructure and mechanical properties of Mg-3Sn-1Mn magnesium alloy

Yang Ming-bo et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2011)

Add to Collection

Article Chemistry, Physical

Effects of strontium on microstructure and mechanical properties of as-cast Mg-5 wt.%Sn alloy

Hongmei Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2010)

Add to Collection

Article Chemistry, Applied

Influence of rare earth on the microstructure and age hardening response of indirect-extruded Mg-5Sn-4Zn alloy

Weili Cheng et al.

JOURNAL OF RARE EARTHS (2010)

Add to Collection

Article Chemistry, Applied

Study on microstructure and mechanical properties of as-cast Mg-Sn-Nd alloys

Wang Qing et al.

JOURNAL OF RARE EARTHS (2010)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of Sb additions on the microstructure and impression creep behavior of a cast Mg-5Sn alloy

G. Nayyeri et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of Sn content on the microstructure and mechanical properties of Mg-7Zn-5Al based alloys

Wenlong Xiao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure and mechanical properties of binary Mg-Sn alloys subjected to indirect extrusion

W. L. Cheng et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of Bi, Sb, and Ca additions on the hot hardness and microstructure of cast Mg-5Sn alloy

M. Keyvani et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

Add to Collection

Article Nanoscience & Nanotechnology

The effect of precipitate state on the creep resistance of Mg-Sn alloys

M. A. Gibson et al.

SCRIPTA MATERIALIA (2010)

Add to Collection

Article Nanoscience & Nanotechnology

Towards the development of heat-treatable high-strength wrought Mg alloys

K. Hono et al.

SCRIPTA MATERIALIA (2010)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Microstructures and tensile properties of as-extruded Mg-Sn binary alloys

Chen Dong et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2010)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Influence of alloying elements on microstructure and microhardness of Mg-Sn-Zn-based alloys

W. L. Cheng et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2010)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of Y addition on as-cast microstructure and mechanical properties of Mg-3Sn-2Ca (wt.%) magnesium alloy

Mingbo Yang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)

Add to Collection

Article Nanoscience & Nanotechnology

Heat-treatable Mg-Sn-Zn wrought alloy

T. T. Sasaki et al.

SCRIPTA MATERIALIA (2009)

Add to Collection

Article Nanoscience & Nanotechnology

Fabrication of extraordinary high-strength magnesium alloy by hot extrusion

T. Homma et al.

SCRIPTA MATERIALIA (2009)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Microstructural characterisation and mechanical properties of Mg-xSn-5Al-1Zn alloys

B. H. Kim et al.

INTERNATIONAL JOURNAL OF CAST METALS RESEARCH (2008)

Add to Collection

Article Nanoscience & Nanotechnology

Compressive creep behavior of as-cast and aging-treated Mg-5 wt% Sn alloys

Shanghai Wei et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

Add to Collection

Article Nanoscience & Nanotechnology

The morphology and crystallography of polygonal Mg2Sn precipitates in a Mg-Sn-Mn-Si alloy

M. Zhang et al.

SCRIPTA MATERIALIA (2008)

Add to Collection

Article Nanoscience & Nanotechnology

Tensile and indentation creep behavior of Mg-5% Sn and Mg-5% Sn-2% Di alloys

Hongmei Liu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)

Add to Collection

Article Chemistry, Physical

The microstructure, tensile properties, and creep behavior of as-cast Mg-(1-10)% Sn alloys

Hongmei Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2007)

Add to Collection

Article Nanoscience & Nanotechnology

Compressive strength and yield asymmetry in extruded Mg-Zn-Ho alloys containing quasicrystal phase

Alok Singh et al.

SCRIPTA MATERIALIA (2007)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of nano-particles on the creep resistance of Mg-Sn based alloys

D. H. Kang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)

Add to Collection

Article Nanoscience & Nanotechnology

The microstructure and mechanical properties of permanent-mould cast Mg-5 wt%Sn-(0-2.6) wt%Di alloys

Hongmei Liu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)

Add to Collection

Article Nanoscience & Nanotechnology

An enhanced age hardening response in Mg-Sn based alloys containing Zn

C. L. Mendis et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)

Add to Collection

Article Nanoscience & Nanotechnology

Enhanced age hardening response by the addition of Zn in Mg-Sn alloys

T. T. Sasaki et al.

SCRIPTA MATERIALIA (2006)

Add to Collection

Article Materials Science, Multidisciplinary

Refinement of precipitate distributions in an age-hardenable Mg-Sn alloy through microalloying

C. L. Mendis et al.

PHILOSOPHICAL MAGAZINE LETTERS (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.