4.6 Article

Tailoring electrolyte enables high-voltage Ni-rich NCM cathode against aggressive cathode chemistries for Li-ion batteries

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

Bulk fatigue induced by surface reconstruction in layered Ni-rich cathodes for Li-ion batteries

Chao Xu et al.

Summary: A structure-driven degradation mechanism is proposed for Ni-rich layered cathode material NMC811, in which a proportion of the material exhibits a lowered accessible state of charge and becomes fatigued after repetitive cycling. This degradation is attributed to high interfacial lattice strain between the reconstructed surface and the bulk layered structure above a distinct threshold.

NATURE MATERIALS (2021)

Article Chemistry, Multidisciplinary

In Situ Construction of Uniform and Robust Cathode-Electrolyte Interphase for Li-Rich Layered Oxides

Jingteng Zhao et al.

Summary: This study demonstrates an in situ anchoring + pouring synergistic cathode-electrolyte interphase (CEI) construction using HTCN and TMSP electrolyte additives to alleviate the challenges faced by high-energy-density Li-rich layered oxides in conventional electrolytes. The uniform and robust in situ constructed CEI layer suppresses transition metal dissolution, shields the cathode against diverse side reactions, and significantly improves electrochemical performance with minimal discharge voltage decay. Insights into enhancing the performance of high-energy and high-voltage cathode materials through effective, convenient, and economical electrolyte approaches are provided.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Electrochemistry

Impacts of fluorinated phosphate additive on interface stabilization of 4.6 V battery cathode

Jaehee Kim et al.

Summary: Raising the cut-off voltage of lithium-ion battery can increase cathode capacity and energy density but requires higher electrolyte and interface stability. Using a high-voltage additive is a promising and economical approach to mitigate stability issues associated with high cut-off voltage.

ELECTROCHIMICA ACTA (2021)

Article Chemistry, Physical

Understanding the Outstanding High-Voltage Performance of NCM523||Graphite Lithium Ion Cells after Elimination of Ethylene Carbonate Solvent from Conventional Electrolyte

Sven Klein et al.

Summary: Increasing the specific energy of lithium ion batteries by raising the cell voltage can lead to rapid capacity fade, which can be prevented by removing ethylene carbonate from the electrolyte. This change in electrolyte composition results in a decrease in transition metal deposits and lithium dendrites, ultimately ensuring a rollover-free performance at high voltage conditions.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

A Cobalt- and Manganese-Free High-Nickel Layered Oxide Cathode for Long-Life, Safer Lithium-Ion Batteries

Zehao Cui et al.

Summary: This study presents a cobalt- and manganese-free ultrahigh-nickel LiNi0.93Al0.05Ti0.01Mg0.01O2 (NATM) cathode that demonstrates high capacity retention and enhanced thermal stability, outperforming common high-nickel cathodes.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Hydrolysis of LiPF6-Containing Electrolyte at High Voltage

Mingzhu Liu et al.

Summary: By combining theoretical and experimental approaches, this study identified the direct reaction between water and PF6- as the main source of corrosive HF in Li-ion batteries. This hydrolysis process is accelerated by high voltage, highlighting the need for effective mitigation strategies to stabilize LiPF6-based electrolytes for high voltage LIBs. Clarifying this important electrolyte failure mechanism points to the potential for improved battery performance and longevity.

ACS ENERGY LETTERS (2021)

Article Chemistry, Physical

Prospects and limitations of single-crystal cathode materials to overcome cross-talk phenomena in high-voltage lithium ion cells

Sven Klein et al.

Summary: This study found that increasing the cell voltage of lithium ion batteries to above 4.3V can enhance specific energy, but conventional poly-crystal cathode active materials may fail at 4.5V. On the other hand, CAMs based on single-crystals show improved cycle life and reduced failure and cross-talk at high voltages.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Review Chemistry, Multidisciplinary

New Concepts in Electrolytes

Matthew Li et al.

CHEMICAL REVIEWS (2020)

Article Chemistry, Multidisciplinary

Enabling Stable High-Voltage LiCoO2Operation by Using Synergetic Interfacial Modification Strategy

Xuerui Yang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Physical

Multifunctional electrolyte additive for improved interfacial stability in Ni-rich layered oxide full-cells

Hieu Quang Pham et al.

ENERGY STORAGE MATERIALS (2020)

Article Multidisciplinary Sciences

Overlooked electrolyte destabilization by manganese (II) in lithium-ion batteries

Cun Wang et al.

NATURE COMMUNICATIONS (2019)

Article Chemistry, Multidisciplinary

Identifying the components of the solid-electrolyte interphase in Li-ion batteries

Luning Wang et al.

NATURE CHEMISTRY (2019)

Article Chemistry, Multidisciplinary

Scavenging Materials to Stabilize LiPF6-Containing Carbonate-Based Electrolytes for Li-Ion Batteries

Jung-Gu Han et al.

ADVANCED MATERIALS (2019)

Review Chemistry, Multidisciplinary

30 Years of Lithium-Ion Batteries

Matthew Li et al.

ADVANCED MATERIALS (2018)

Review Materials Science, Ceramics

Research Process on Novel Electrolyte of Lithium-ion Battery Based on Lithium Salts

Ma Guo-Qiang et al.

JOURNAL OF INORGANIC MATERIALS (2018)

Article Nanoscience & Nanotechnology

Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries

Xiulin Fan et al.

NATURE NANOTECHNOLOGY (2018)

Article Chemistry, Physical

Extending the Service Life of High-Ni Layered Oxides by Tuning the Electrode-Electrolyte Interphase

Jianyu Li et al.

ADVANCED ENERGY MATERIALS (2018)

Article Chemistry, Physical

Converting detrimental HF in electrolytes into a highly fluorinated interphase on cathodes

Changchun Ye et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Article Chemistry, Physical

Mechanism of cycling degradation and strategy to stabilize a nickel-rich cathode

Xuerui Yang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Article Electrochemistry

Electrolyte and SEI Decomposition Reactions of Transition Metal Ions Investigated by On-Line Electrochemical Mass Spectrometry

Sophie Solchenbach et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Article Chemistry, Multidisciplinary

Fluorinated Polyimide as a Novel High-Voltage Binder for High-Capacity Cathode of Lithium-Ion Batteries

Hieu Quang Pham et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Article Chemistry, Physical

Why is tris(trimethylsilyl) phosphite effective as an additive for high-voltage lithium-ion batteries?

Young-Kyu Han et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Review Chemistry, Physical

Future generations of cathode materials: an automotive industry perspective

Dave Andre et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Article Chemistry, Physical

Interfacial Origin of Performance Improvement and Fade for 4.6 V LiNi0.5Co0.2Mn0.3O2 Battery Cathodes

Yu-Mi Lee et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2014)

Article Electrochemistry

Effects of Dissolved Transition Metals on the Electrochemical Performance and SEI Growth in Lithium-Ion Batteries

Tapesh Joshi et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)

Article Chemistry, Multidisciplinary

Direct Calculation of Li-Ion Transport in the Solid Electrolyte Interphase

Siqi Shi et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)