4.8 Article

Serrated lithium fluoride nanofibers-woven interlayer enables uniform lithium deposition for lithium-metal batteries

Related references

Note: Only part of the references are listed.
Review Chemistry, Multidisciplinary

Recent Developments in Dendrite-Free Lithium-Metal Deposition through Tailoring of Micro- and Nanoscale Artificial Coatings

Melissa L. Meyerson et al.

Summary: Forty years after the failed introduction of rechargeable lithium-metal batteries and 30 years after the successful commercialization of the lower capacity, graphite-anode based lithium-ion battery by Sony, demand for higher energy density batteries is leading to reinvestigation of the problem of dendrite growth that makes the metallic lithium anodes unsafe. One strategy to mitigate dendrite growth is to deposit thin, tailored, corrosion-passivating coatings on the metallic lithium, instead of allowing the metal to spontaneously react with the organic electrolyte solution to form its passivating solid electrolyte interface (SEI).

ACS NANO (2021)

Article Chemistry, Multidisciplinary

In Situ Self-Assembly of Ordered Organic/Inorganic Dual-Layered Interphase for Achieving Long-Life Dendrite-Free Li Metal Anodes in LiFSI-Based Electrolyte

Jian Wang et al.

Summary: A new method of fabricating an ordered dual-layered organic/inorganic hybrid solid electrolyte interphase (SEI) on the surface of metallic lithium has been proposed to suppress dendrite growth, showing excellent electrode performance and corrosion resistance. Studies have revealed the evolution process of the dual-layered structure and the surprising ability of the formed double protection ordered hybrid interphase layer against corrosion.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Revealing the Origin of Highly Efficient Polysulfide Anchoring and Transformation on Anion-Substituted Vanadium Nitride Host

Shuangshuang Tan et al.

Summary: Metal nitrides and quasi-metallic compounds are widely used as sulfur hosts in Lithium-sulfur batteries to enhance electronic conductivity and trap polysulfide shuttling. The surface compositions and sulfur anchoring mechanisms of these materials remain controversial. This study elucidates the anion-substituted mechanism in vanadium oxynitride and nitride, revealing the enhanced electron delocalization and catalytic properties for promoting the development of advanced cathode materials.

ADVANCED FUNCTIONAL MATERIALS (2021)

Review Chemistry, Multidisciplinary

Challenges and Strategies toward Cathode Materials for Rechargeable Potassium-Ion Batteries

Shude Liu et al.

Summary: With increasing demand for grid-scale energy storage, potassium-ion batteries (PIBs) have emerged as promising complements or alternatives to commercial lithium-ion batteries. However, the low energy density and unstable cycle life of cathode materials are current challenges that need to be addressed in the development of next-generation PIBs.

ADVANCED MATERIALS (2021)

Article Multidisciplinary Sciences

Constructing multifunctional solid electrolyte interface via in-situ polymerization for dendrite-free and low N/P ratio lithium metal batteries

Dan Luo et al.

Summary: A stable multifunctional solid electrolyte interface (SEI) can be constructed by employing electrolyte additives containing catechol and acrylic groups via in-situ anionic polymerization, leading to uniform Li deposition and dendrite-free anode in lithium metal batteries. This strategy offers remarkable cycling performance with high current density, ultra-long cycle life, high cumulative capacity, and stable cycling under high temperature conditions.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Multidisciplinary

Dendrite-Free Li-Metal Anode Enabled by Dendritic Structure

Hongyu Zhang et al.

Summary: The Li-metal anode is stabilized by building dendrite-like Li3Mg7 alloys enriched with Li-containing polymers and using LiH as the Li-ion conductor. This unique structure effectively reduces Li dendrite formation, promotes uniform Li deposition and extraction, and allows for long-term cycling stability with over 900 hours of stable performance. Coupling this anode with LiFePO4 and S cathodes results in superior cycling stability in full cells.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Polycationic Polymer Layer for Air-Stable and Dendrite-Free Li Metal Anodes in Carbonate Electrolytes

Jingyi Wu et al.

Summary: Controllable dendrite growth in lithium metal batteries has been a major obstacle to their commercialization. A polycationic and hydrophobic polymer protective layer has been developed to address this issue, allowing for stable and efficient Li metal anodes. This protective layer enables steady Li plating/stripping, improved Li utilization efficiency, and enhanced electrochemical performance in cells utilizing LiNi0.8Mn0.1Co0.1O2 and LiFePO4. The layer also contributes to the formation of a stable solid electrolyte interphase (SEI), as demonstrated through mechanism investigation.

ADVANCED MATERIALS (2021)

Article Chemistry, Physical

Recent progress of functional separators in dendrite inhibition for lithium metal batteries

Wenchen Ren et al.

Summary: Lithium metal batteries have high theoretical energy density but safety concerns, with strategies such as mechanical barriers, Li+ ion flux redistribution, and nucleation sites used to inhibit the growth of lithium dendrites. Recent advances, existing problems, and future prospects of functional separators for lithium dendrite inhibition are discussed.

ENERGY STORAGE MATERIALS (2021)

Review Chemistry, Physical

Carbonaceous Anode Materials for Non-aqueous Sodium- and Potassium-Ion Hybrid Capacitors

Shude Liu et al.

Summary: Sodium- and potassium-ion hybrid capacitors with carbonaceous anodes offer advantages such as high ion storage feasibility, low cost, and non-toxicity. Significant progress has been made in improving battery performance through the use of carbonaceous anodes, but challenges remain in terms of anode reliability.

ACS ENERGY LETTERS (2021)

Article Nanoscience & Nanotechnology

Fluorinated interphase enables reversible aqueous zinc battery chemistries

Longsheng Cao et al.

Summary: The study introduces an aqueous zinc battery with a solid-electrolyte interphase that enables excellent performance in various tests, demonstrating its potential for practical applications in energy storage.

NATURE NANOTECHNOLOGY (2021)

Article Chemistry, Multidisciplinary

Single-Atom Zinc and Anionic Framework as Janus Separator Coatings for Efficient Inhibition of Lithium Dendrites and Shuttle Effect

Chun-Lei Song et al.

Summary: This study presents a Janus separator prepared with anionic metal-organic framework and single-atom zinc catalyst, which effectively inhibits the dendrite growth and shuttle effect of Li-S batteries. The results show stable cyclic performance and outstanding protection capability, making it suitable for various types of Li-S or Li-Se batteries.

ACS NANO (2021)

Article Chemistry, Physical

Unlocking the Potential of Oxygen-Deficient Copper-Doped Co3O4 Nanocrystals Confined in Carbon as an Advanced Electrode for Flexible Solid-State Supercapacitors

Shude Liu et al.

Summary: Incorporating Cu dopants and O vacancies into Co3O4 nanocrystals confined in a carbon matrix, termed as O-v-Cu-Co3O4@C, helps improve the specific capacity and rate performance of the material. The heterostructured architecture with multifunctional nanogeometries enables high intercomponent synergy, leading to enhanced electrical conductivity and enriched redox chemistry, ultimately resulting in a significantly improved energy density of 64.1 W h kg(-1) at 800 W kg(-1) for asymmetric supercapacitors.

ACS ENERGY LETTERS (2021)

Review Electrochemistry

Electrolyte/Electrode Interfaces in All-Solid-State Lithium Batteries: A Review

Yuepeng Pang et al.

Summary: All-solid-state lithium batteries have great potential for higher energy density and safety, but the poor electrode compatibility of solid electrolytes may cause electrolyte/electrode interface degradation, leading to battery failure. Mechanistic analyses and strategies for enhancing electrolyte/electrode interfaces are crucial for the future development of these batteries.

ELECTROCHEMICAL ENERGY REVIEWS (2021)

Review Materials Science, Multidisciplinary

Towards better Li metal anodes: Challenges and strategies

Ying Zhang et al.

MATERIALS TODAY (2020)

Article Chemistry, Multidisciplinary

Copper Nitride Nanowires Printed Li with Stable Cycling for Li Metal Batteries in Carbonate Electrolytes

Dongsoo Lee et al.

ADVANCED MATERIALS (2020)

Article Multidisciplinary Sciences

The intrinsic behavior of lithium fluoride in solid electrolyte interphases on lithium

Mingfu He et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2020)

Article Chemistry, Multidisciplinary

A Mixed Lithium-Ion Conductive Li2S/Li2Se Protection Layer for Stable Lithium Metal Anode

Fanfan Liu et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Review Chemistry, Applied

Three dimensional porous frameworks for lithium dendrite suppression

Shuyan Ni et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

Article Chemistry, Multidisciplinary

Suppressing the Shuttle Effect and Dendrite Growth in Lithium-Sulfur Batteries

Jianan Wang et al.

ACS NANO (2020)

Article Multidisciplinary Sciences

Lithium anode stable in air for low-cost fabrication of a dendrite-free lithium battery

Xiaowei Shen et al.

NATURE COMMUNICATIONS (2019)

Article Chemistry, Applied

Porous LiF layer fabricated by a facile chemical method toward dendrite-free lithium metal anode

Yanxia Yuan et al.

JOURNAL OF ENERGY CHEMISTRY (2019)

Article Chemistry, Multidisciplinary

Liquid Polydimethylsiloxane Grafting to Enable Dendrite-Free Li Plating for Highly Reversible Li-Metal Batteries

Junwei Meng et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Chemistry, Multidisciplinary

Nucleation and Early Stage Growth of Li Electrodeposits

Prayag Biswal et al.

NANO LETTERS (2019)

Review Chemistry, Physical

Interlayers for lithium-based batteries

Long Jiao et al.

ENERGY STORAGE MATERIALS (2019)

Article Chemistry, Physical

Regulating Li deposition by constructing LiF-rich host for dendrite-free lithium metal anode

Yanxia Yuan et al.

ENERGY STORAGE MATERIALS (2019)

Review Materials Science, Multidisciplinary

Artificial Interphases for Highly Stable Lithium Metal Anode

Rui Xu et al.

MATTER (2019)

Article Chemistry, Physical

High-Energy Li Metal Battery with Lithiated Host

Long Chen et al.

JOULE (2019)

Article Chemistry, Physical

One-pot solution coating of high quality LiF layer to stabilize Li metal anode

Jialiang Lang et al.

ENERGY STORAGE MATERIALS (2019)

Article Chemistry, Multidisciplinary

Robust Pinhole-free Li3N Solid Electrolyte Grown from Molten Lithium

Yanbin Li et al.

ACS CENTRAL SCIENCE (2018)

Review Energy & Fuels

Batteries and fuel cells for emerging electric vehicle markets

Zachary P. Cano et al.

NATURE ENERGY (2018)

Article Energy & Fuels

Stable cycling of high-voltage lithium metal batteries in ether electrolytes

Shuhong Jiao et al.

NATURE ENERGY (2018)

Article Chemistry, Multidisciplinary

An Armored Mixed Conductor Interphase on a Dendrite-Free Lithium-Metal Anode

Chong Yan et al.

ADVANCED MATERIALS (2018)

Article Multidisciplinary Sciences

Fluorinated solid electrolyte interphase enables highly reversible solid-state Li metal battery

Xiulin Fan et al.

SCIENCE ADVANCES (2018)

Article Chemistry, Multidisciplinary

Nanoscale Nucleation and Growth of Electrodeposited Lithium Metal

Allen Pei et al.

NANO LETTERS (2017)

Review Nanoscience & Nanotechnology

Reviving the lithium metal anode for high-energy batteries

Dingchang Lin et al.

NATURE NANOTECHNOLOGY (2017)

Review Nanoscience & Nanotechnology

Lithium battery chemistries enabled by solid-state electrolytes

Arumugam Manthiram et al.

NATURE REVIEWS MATERIALS (2017)

Review Chemistry, Multidisciplinary

Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review

Xin-Bing Cheng et al.

CHEMICAL REVIEWS (2017)

Article Electrochemistry

Optimizing Areal Capacities through Understanding the Limitations of Lithium-Ion Electrodes

Kevin G. Gallagher et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)

Article Chemistry, Multidisciplinary

Dendritic Growth of NaCl Crystals in a Gel Matrix: Variation of Branching and Control of Bending

Mai Goto et al.

CRYSTAL GROWTH & DESIGN (2016)

Article Electrochemistry

Interfacial Study on Solid Electrolyte Interphase at Li Metal Anode: Implication for Li Dendrite Growth

Z. Liu et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)

Article Energy & Fuels

Design principles for electrolytes and interfaces for stable lithium-metal batteries

Mukul D. Tikekar et al.

NATURE ENERGY (2016)

Review Nanoscience & Nanotechnology

Promise and reality of post-lithium-ion batteries with high energy densities

Jang Wook Choi et al.

NATURE REVIEWS MATERIALS (2016)

Article Chemistry, Physical

Li2S5-based ternary-salt electrolyte for robust lithium metal anode

Chen-Zi Zhao et al.

ENERGY STORAGE MATERIALS (2016)

Article Chemistry, Multidisciplinary

Polymer Nanofiber-Guided Uniform Lithium Deposition for Battery Electrodes

Zheng Liang et al.

NANO LETTERS (2015)

Article Multidisciplinary Sciences

The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth

Weiyang Li et al.

NATURE COMMUNICATIONS (2015)

Article Chemistry, Physical

Stable lithium electrodeposition in liquid and nanoporous solid electrolytes

Yingying Lu et al.

NATURE MATERIALS (2014)